Wraps by car

Brabus ML 63 Biturbo wrap

A Brabus ML 63 Biturbo wrap covers one generation built from 2009 to 2011. The catalog includes a single SUV body style with five doors. A full vinyl wrap of this large vehicle uses about 64 ft (19.5 m) of 60-inch (1.52 m) cast film.

1generations19.5 mof film for a full wrap

Brabus ML 63 Biturbo, first generation, factory photo
Brabus ML 63 Biturbo, first generation. Factory color shown.

Brabus ML 63 Biturbo wrap colors and ideas

  • ML 63 Biturbo black wrap
  • ML 63 Biturbo white wrap
  • ML 63 Biturbo gray wrap
  • ML 63 Biturbo silver wrap
  • ML 63 Biturbo red wrap
  • ML 63 Biturbo blue wrap
  • ML 63 Biturbo green wrap
  • ML 63 Biturbo yellow wrap
  • ML 63 Biturbo orange wrap
  • ML 63 Biturbo purple wrap
  • ML 63 Biturbo pink wrap
  • ML 63 Biturbo teal wrap
  • ML 63 Biturbo brown wrap
  • ML 63 Biturbo gold wrap
  • ML 63 Biturbo chrome wrap
  • ML 63 Biturbo color shift wrap
  • ML 63 Biturbo carbon fiber wrap
  • ML 63 Biturbo camo and patterned wrap

How much vinyl to wrap a Brabus ML 63 Biturbo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2011SUV (5 doors)188.2 in (4,781 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

ML 63 Biturbo wrap cost factors

ML 63 Biturbo wrap cost depends on the amount and type of film used for this body. The film requirement is about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for a basic color change. A chrome or patterned film raises the material to about 80 ft (24.5 m). The tall body also requires platform work for the roof.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (73.3 in (1,863 mm)): the roof is wrapped from a platform.

ML 63 Biturbo wraps by generation

Swipe sideways. Tap a card for the full description.

Brabus ML 63 Biturbo, first generation, factory photo
Factory color shown

2009–2011 ML 63 Biturbo SUV (first generation)

2009–2011SUV (5 doors)188.2 in (4,781 mm)

The first generation ML 63 Biturbo from 2009 to 2011 has a body height of 73.3 in (1,863 mm). The roof of this SUV is wrapped from a platform because of that height. This extra step adds time to the wrapping process.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (73.3 in (1,863 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on an ML 63 Biturbo

A partial wrap on an ML 63 Biturbo can cover the roof, hood, or mirror caps. An ML 63 Biturbo chrome delete covers window trim and badges with black film. Paint protection film (PPF) is applied as a clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Brabus ML 63 Biturbo: body, cut-outs and film

The Brabus ML 63 Biturbo vinyl wrap involves a 188.2 in (4,781 mm) long SUV with a tall roofline. Its five-door body adds seams and edges that must be handled with care. A full wrap in a chrome or patterned film takes about 80 ft (24.5 m) because of the repeat pattern.

ML 63 Biturbo wrap ideas must account for a tailgate that includes the rear glass. The film ends at the edge of that glass so the tailgate needs careful trimming. The tall body of 73.3 in (1,863 mm) means the roof is wrapped from a platform.

How much vinyl to wrap an ML 63 Biturbo has one answer for the single generation listed. The body length of 188.2 in (4,781 mm) is a primary factor in the film estimate. For cast film the figure is about 64 ft (19.5 m) of 60-inch (1.52 m) material.

Questions about wrapping a Brabus ML 63 Biturbo

How much vinyl does it take to wrap a Brabus ML 63 Biturbo?

It takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film to wrap a Brabus ML 63 Biturbo. The estimate applies to the newest body in the catalog. Chrome or patterned film needs about 80 ft (24.5 m).

Can I wrap only the hood or the roof of an ML 63 Biturbo?

Yes, you can wrap only the hood or the roof of an ML 63 Biturbo. A partial wrap often covers the roof, hood, or mirror caps on this SUV. Other options include a chrome delete on window trim and badges.

Is an ML 63 Biturbo hard to wrap?

An ML 63 Biturbo is not the easiest vehicle to wrap because of its size and design. The tailgate has the rear glass in it, so the film must end at the glass edge. The tall body of 73.3 in (1,863 mm) means the roof requires a platform.

How many generations of the ML 63 Biturbo does this page cover?

This page covers one generation of the ML 63 Biturbo, produced from 2009 to 2011.