Choosing a DongFeng A9 wrapped in chrome starts with picking a finish from the color picker above, then choosing a specific film from that group. After the film is selected, decide between a full color change wrap and a partial job on the roof, hood or mirror caps. The A9's large hood and long roof make a full wrap the best way to get a continuous chrome surface. For a more subtle effect, a partial wrap in chrome on the roof and mirror caps leaves the factory paint on the sides.

Factory paint does not have to be perfect before a chrome wrap, because the film hides most small chips and swirls. Seams are unavoidable on curved sections like the bumpers, and on the A9 the shop will place them along body lines where possible. The hood and roof are wide enough to need film joints only if the film is narrower than 60 inches. Using cast film with a high-gloss chrome face keeps seams less noticeable than on matte or satin chrome.

A chrome wrap on the A9 is removable, so you can return the car to its original paint when you want a change. Hand wash only is the rule after installation, using a soft mitt and a gentle soap without wax or petroleum distillates. Automatic car washes with brushes can scratch the chrome finish and lift film edges on the door handles and mirror caps. For best results, dry the car with a clean microfiber towel so water spots do not etch into the chrome film.