Wraps by car

DongFeng A9 wrap

The DongFeng A9 wrap page covers the full-size sedan built from 2016 to 2019. One generation is listed, and a full vinyl wrap of that body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film.

1generations19 mof film for a full wrap

DongFeng A9, first generation, factory photo
DongFeng A9, first generation. Factory color shown.

DongFeng A9 wrap colors and ideas

  • DongFeng A9 black wrap
  • DongFeng A9 white wrap
  • DongFeng A9 gray wrap
  • DongFeng A9 silver wrap
  • DongFeng A9 red wrap
  • DongFeng A9 blue wrap
  • DongFeng A9 green wrap
  • DongFeng A9 yellow wrap
  • DongFeng A9 orange wrap
  • DongFeng A9 purple wrap
  • DongFeng A9 pink wrap
  • DongFeng A9 teal wrap
  • DongFeng A9 brown wrap
  • DongFeng A9 gold wrap
  • DongFeng A9 chrome wrap
  • DongFeng A9 color shift wrap
  • DongFeng A9 carbon fiber wrap
  • DongFeng A9 camo and patterned wrap

How much vinyl to wrap a DongFeng A9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–2019sedan (4 doors)199.4 in (5,066 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

DongFeng A9 wrap cost factors

A DongFeng A9 wrap cost depends on the film type, the number of panels covered, and the labor for the large 199.4 in (5,066 mm) body. A full color change on this sedan needs about 62 ft (19 m) of film, while chrome or patterned film raises the material amount to about 72 ft (22 m). Removing trim or doing a chrome delete adds prep time, but no price is set here.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: sedan (4 doors).

DongFeng A9 wraps by generation

Swipe sideways. Tap a card for the full description.

DongFeng A9, first generation, factory photo
Factory color shown

2016–2019 DongFeng A9 sedan (first generation)

2016–2019sedan (4 doors)199.4 in (5,066 mm)

The first generation DongFeng A9 is a full-size sedan with four doors and a length of 199.4 in (5,066 mm). That long body splits into more than ten wrap panels, including the roof, hood, trunk, doors, fenders, and bumpers. A full wrap needs about 62 ft (19 m) of 60-inch (1.52 m) cast film, or about 72 ft (22 m) for chrome or patterned film.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a DongFeng A9

For a partial wrap on a DongFeng A9, the roof, hood, and mirror caps are the most direct vinyl jobs. A chrome delete covers the window trim and badges with black film, a smaller task that changes the look without a full color change wrap. Paint protection film (PPF) can also be applied as clear film on the front end to guard the hood, bumper, and fenders.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a DongFeng A9: body, cut-outs and film

A DongFeng A9 vinyl wrap follows the four-door sedan shape, which means five main body sides plus the roof. The long 199.4 in (5,066 mm) body and large panels increase the amount of film compared with a compact car. A full wrap uses roughly 62 ft (19 m) of 60-inch (1.52 m) material, or about 72 ft (22 m) for chrome or patterned film.

DongFeng A9 wrap ideas often start with the bright trim. A color change wrap covers the painted surfaces, while a chrome delete covers the window trim and badges with black film. Door handles, mirrors, and the antenna need cut-outs or removal for a clean install.

When counting how much vinyl to wrap a DongFeng A9, generation changes matter less here because this page lists only the 2016–2019 body. The amount of film stays the same for every car of this generation, since the sedan body did not change shape. Installers can plan the same panel count and film length for any A9 from those years.

Questions about wrapping a DongFeng A9

How much vinyl does it take to wrap a DongFeng A9?

A full wrap of a DongFeng A9 takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 72 ft (22 m) because of extra material for trimming and matching patterns.

Can I wrap only the hood or the roof of a DongFeng A9?

Yes, you can wrap only the hood or the roof of a DongFeng A9. A partial wrap on the roof, hood, and mirror caps is a standard job, and a chrome delete on the window trim and badges is also possible without covering the whole car.

Is a DongFeng A9 hard to wrap?

A DongFeng A9 is not the easiest car to wrap because of its large 199.4 in (5,066 mm) body and full-size sedan panels. The film estimate assumes a skilled installer, and parts like the door handles, mirrors, and antenna need cut-outs or removal, which adds work.

How many generations of the DongFeng A9 does this page cover?

This page covers one generation of the DongFeng A9, produced from 2016 to 2019. The catalog lists a single body style, a four-door sedan, so all references here apply to that generation.