Wraps by car

DongFeng E1 wrap

This page covers the DongFeng E1 wrap for the 2020–2021 first generation SUV. The catalog lists one generation for this electric car. A full wrap of the newest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The film estimate rises to about 57 ft (17.5 m) when you choose chrome or patterned vinyl wrap.

1generations14.5 mof film for a full wrap

DongFeng E1, first generation, factory photo
DongFeng E1, first generation. Factory color shown.

DongFeng E1 wrap colors and ideas

  • DongFeng E1 black wrap
  • DongFeng E1 white wrap
  • DongFeng E1 gray wrap
  • DongFeng E1 silver wrap
  • DongFeng E1 red wrap
  • DongFeng E1 blue wrap
  • DongFeng E1 green wrap
  • DongFeng E1 yellow wrap
  • DongFeng E1 orange wrap
  • DongFeng E1 purple wrap
  • DongFeng E1 pink wrap
  • DongFeng E1 teal wrap
  • DongFeng E1 brown wrap
  • DongFeng E1 gold wrap
  • DongFeng E1 chrome wrap
  • DongFeng E1 color shift wrap
  • DongFeng E1 carbon fiber wrap
  • DongFeng E1 camo and patterned wrap

How much vinyl to wrap a DongFeng E1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–2021SUV (5 doors)145.6 in (3,699 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

DongFeng E1 wrap cost factors

The DongFeng E1 wrap cost depends on the film type, the panels covered and the work on the tailgate and charge port door. A full wrap of this 145.6 in (3,699 mm) SUV takes about 48 ft (14.5 m) of cast film. A chrome or patterned film needs about 57 ft (17.5 m), which adds material to the job. The tailgate glass and the separate charge port door add cut and finish time.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

DongFeng E1 wraps by generation

Swipe sideways. Tap a card for the full description.

DongFeng E1, first generation, factory photo
Factory color shown

2020–2021 DongFeng E1 SUV (first generation)

2020–2021SUV (5 doors)145.6 in (3,699 mm)

The first generation DongFeng E1 is a 145.6 in (3,699 mm) long SUV with five doors. The size and body style keep the panel count to the hood, roof, sides, bumpers and tailgate. The tailgate has the rear glass set in the panel, so the vinyl ends at the glass edge. The roof and hood are straightforward panels for a single installer to handle.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a DongFeng E1

A partial wrap on the DongFeng E1 covers the roof, hood or mirror caps as separate jobs. A chrome delete covers the window trim and badges with black film. Paint protection film is a clear film on the front end to guard the hood and bumper. These jobs use less film than a full wrap and leave the rest of the body in the original color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a DongFeng E1: body, cut-outs and film

The DongFeng E1 vinyl wrap follows the compact SUV body with five doors. The car is 145.6 in (3,699 mm) long, which keeps the side panels short and direct to cut. The five-door layout means the film work splits across the front doors, rear doors and tailgate. Installers count the rear glass inside the tailgate as a separate edge to trim.

The tailgate of the DongFeng E1 carries the rear glass in the panel, so the vinyl ends at the edge of the glass. The electric car has a charge port door that is wrapped as a small piece of its own. For DongFeng E1 wrap ideas, a chrome delete covers the window trim and badges with black film. A paint protection film on the front end adds clear film to the hood and bumper.

This page covers one generation of the DongFeng E1, produced from 2020 to 2021. The body style is the same SUV with five doors across both years. To work out how much vinyl to wrap a DongFeng E1, the film estimate stays at about 48 ft (14.5 m) for the full body. A wrap in chrome or patterned film needs about 57 ft (17.5 m) because of the extra material for matching.

Questions about wrapping a DongFeng E1

How much vinyl does it take to wrap a DongFeng E1?

A full wrap of a DongFeng E1 takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned vinyl wrap takes about 57 ft (17.5 m) of film. The car is a 145.6 in (3,699 mm) long SUV with five doors.

Can I wrap only the hood or the roof of a DongFeng E1?

Yes, you can wrap only the hood or the roof of a DongFeng E1. A partial wrap covers those panels on their own. A chrome delete covers the window trim and badges, and paint protection film is a clear film on the front end.

Is a DongFeng E1 hard to wrap?

The DongFeng E1 is a small five-door SUV, which keeps most panels easy to handle. The tailgate needs care because the rear glass sits in the panel and the film ends at the glass edge. The electric car has a charge port door that is wrapped as a small piece of its own.

How many generations of the DongFeng E1 does this page cover?

This page covers one generation of the DongFeng E1. The generation included in the catalog is the first generation, produced from 2020 to 2021.