Wraps by car

DongFeng Oting wrap

This page covers the DongFeng Oting vinyl wrap for the first generation SUV, produced from 2007 to 2013. The catalog shows one generation with a five-door SUV body. A full wrap of this body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

1generations18.5 mof film for a full wrap

DongFeng Oting, first generation, factory photo
DongFeng Oting, first generation. Factory color shown.

DongFeng Oting wrap colors and ideas

  • Oting black wrap
  • Oting white wrap
  • Oting gray wrap
  • Oting silver wrap
  • Oting red wrap
  • Oting blue wrap
  • Oting green wrap
  • Oting yellow wrap
  • Oting orange wrap
  • Oting purple wrap
  • Oting pink wrap
  • Oting teal wrap
  • Oting brown wrap
  • Oting gold wrap
  • Oting chrome wrap
  • Oting color shift wrap
  • Oting carbon fiber wrap
  • Oting camo and patterned wrap

How much vinyl to wrap a DongFeng Oting

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2013SUV (5 doors)180.3 in (4,580 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)

Oting wrap cost factors

Oting wrap cost depends on the film type and the labor of the body. The standard estimate is about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full wrap. A chrome or patterned film raises the material to about 77 ft (23.5 m). The tall body, at 71.7 in (1,820 mm), adds time because the roof is wrapped from a platform.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (71.7 in (1,820 mm)): the roof is wrapped from a platform.

Oting wraps by generation

Swipe sideways. Tap a card for the full description.

DongFeng Oting, first generation, factory photo
Factory color shown

2007–2013 Oting SUV (first generation)

2007–2013SUV (5 doors)180.3 in (4,580 mm)

The first generation DongFeng Oting, sold from 2007 to 2013, is a five-door SUV with a tall body. At 71.7 in (1,820 mm) high, the roof cannot be wrapped safely from the ground. The installer uses a platform for the roof, which adds time to the job. This height is the main thing that separates this generation from lower vehicles in the shop.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (71.7 in (1,820 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on an Oting

The Oting also suits partial wrap jobs like the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film, changing the brightwork. Paint protection film (PPF) is another option: a clear film on the front end guards against stone chips. These smaller jobs use the same cast film as a full wrap but in smaller pieces.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a DongFeng Oting: body, cut-outs and film

The DongFeng Oting vinyl wrap is shaped by a body that is 180.3 in (4,580 mm) long and 71.7 in (1,820 mm) tall. The single five-door SUV style means every wrapped Oting has the same panel count. The tailgate includes the rear glass, so the film must end cleanly at that edge. The tall body also means the roof needs a platform for safe wrapping.

Oting wrap ideas start with the tailgate, where the rear glass is part of the panel. The film has to be trimmed precisely to the edge of that glass. The roof is the other area that adds steps, because the body height of 71.7 in (1,820 mm) calls for a platform. These two details shape most design and labor choices on this car.

When you work out how much vinyl to wrap an Oting, the generation matters less because only one is in this catalog. The first generation SUV from 2007–2013 is the only body in the film estimate. A full wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film instead of solid color, the estimate rises to about 77 ft (23.5 m).

Questions about wrapping a DongFeng Oting

How much vinyl does it take to wrap a DongFeng Oting?

A DongFeng Oting takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you pick chrome or patterned film, the total rises to about 77 ft (23.5 m). These figures are for the first generation SUV, the only body in this catalog.

Can I wrap only the hood or the roof of an Oting?

Yes, you can wrap only the hood or the roof of an Oting. Partial jobs on this car often include the roof, hood, and mirror caps. You can also do a chrome delete on the window trim and badges, or put clear paint protection film (PPF) on the front end.

Is an Oting hard to wrap?

Yes, an Oting is harder to wrap than some SUVs because of its tall body and tailgate design. The body height of 71.7 in (1,820 mm) means the roof must be wrapped from a platform. The tailgate has the rear glass in it, so the film has to be cut precisely at the edge of the glass.

How many generations of the Oting does this page cover?

This page covers one generation of the Oting, the first generation produced from 2007 to 2013. The catalog lists a single body style for this car, a five-door SUV.