Wraps by car

DongFeng 580 wrap

The DongFeng 580 wrap page covers the single generation of this five-door SUV, produced from 2016 to the present. A full vinyl wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 74 ft (22.5 m).

1generations19 mof film for a full wrap

DongFeng 580, first generation, factory photo
DongFeng 580, first generation. Factory color shown.

DongFeng 580 wrap colors and ideas

  • DongFeng 580 black wrap
  • DongFeng 580 white wrap
  • DongFeng 580 gray wrap
  • DongFeng 580 silver wrap
  • DongFeng 580 red wrap
  • DongFeng 580 blue wrap
  • DongFeng 580 green wrap
  • DongFeng 580 yellow wrap
  • DongFeng 580 orange wrap
  • DongFeng 580 purple wrap
  • DongFeng 580 pink wrap
  • DongFeng 580 teal wrap
  • DongFeng 580 brown wrap
  • DongFeng 580 gold wrap
  • DongFeng 580 chrome wrap
  • DongFeng 580 color shift wrap
  • DongFeng 580 carbon fiber wrap
  • DongFeng 580 camo and patterned wrap

How much vinyl to wrap a DongFeng 580

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowSUV (5 doors)184.3 in (4,680 mm) to 185.8 in (4,720 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

DongFeng 580 wrap cost factors

DongFeng 580 wrap cost depends on the size of the body, which is up to 185.8 in (4,720 mm) long, and the amount of film needed. A full wrap uses about 62 ft (19 m) of cast film, or about 74 ft (22.5 m) for chrome or patterned film. The cost also depends on the film brand and finish you choose. Extra labor for removing roof rails or cutting around sensors and cameras will affect the final cost.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2018: bumpers and lights differ between the versions, and so do the film cuts.

DongFeng 580 wraps by generation

Swipe sideways. Tap a card for the full description.

DongFeng 580, first generation, factory photo
Factory color shown

2016–now DongFeng 580 SUV (first generation)

2016–nowSUV (5 doors)184.3 in (4,680 mm) to 185.8 in (4,720 mm)

The first generation DongFeng 580 was introduced in 2016 and continues today with a restyling in 2018. The restyling changed the bumpers and lights, so film patterns for the pre-2018 version do not fit the post-2018 version. However, the overall body length increased slightly from 184.3 in (4,680 mm) to 185.8 in (4,720 mm), but the main panels remain the same. When wrapping, you only need to match the bumper film to the correct version.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a DongFeng 580

A partial wrap on a DongFeng 580 can cover the roof, hood, or mirror caps. For a chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is often applied to the front end as a clear film. These smaller jobs use less film and are quicker than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a DongFeng 580: body, cut-outs and film

A DongFeng 580 vinyl wrap must fit a large SUV body that ranges from 184.3 in (4,680 mm) to 185.8 in (4,720 mm) in length. The five-door style means long roof and door panels, so a full wrap uses more film than a smaller car. The rear tailgate includes the glass, and the film ends at the edge of that glass. Every trim has a sunroof, so the roof film is cut around its opening.

DongFeng 580 wrap ideas have to account for several factory features that need cut-outs or removal. Every trim has roof rails, which come off before the roof is wrapped or the film is cut along them. Parking sensors in the bumpers and cameras in the body require the film to be cut around each sensor and lens. Fog lamps in the front bumper also need cut-outs in the bumper film.

To know how much vinyl to wrap a DongFeng 580, you only need to plan for one generation, as the model has been produced from 2016 to now without a full redesign. The only change is a restyling in 2018 that altered the bumpers and lights. Film cut for one version of the bumper will not fit the other, but the main body panels are the same. So the total film amount stays the same for all years.

Questions about wrapping a DongFeng 580

How much vinyl does it take to wrap a DongFeng 580?

A full wrap of a DongFeng 580 takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, plan for about 74 ft (22.5 m). The amount is the same for all years because the body size did not change significantly.

Can the roof of a DongFeng 580 be wrapped?

Yes, the roof of a DongFeng 580 can be wrapped. Every trim has a sunroof, so the film is cut around its opening. Roof rails are present on every trim and must be removed or the film cut along them.

Which years of the DongFeng 580 take the same film cuts?

All years of the DongFeng 580 from 2016 to now use the same film cuts for the main body panels. However, the restyling in 2018 changed the bumpers and lights, so bumper film cuts differ between pre-2018 and post-2018 versions.

Can I wrap only the hood or the roof of a DongFeng 580?

Yes, you can wrap only the hood or the roof of a DongFeng 580. A partial wrap can cover the roof, hood, or mirror caps. The roof has a sunroof, so film is cut around its opening, and roof rails are removed or cut around.