Wraps by car

DongFeng Joyear S50 wrap

A DongFeng Joyear S50 wrap covers every painted panel of this first-generation compact sedan. The catalog shows one generation, produced from 2014 to now. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

1generations17.5 mof film for a full wrap

DongFeng Joyear S50, first generation, factory photo
DongFeng Joyear S50, first generation. Factory color shown.

DongFeng Joyear S50 wrap colors and ideas

  • Joyear S50 black wrap
  • Joyear S50 white wrap
  • Joyear S50 gray wrap
  • Joyear S50 silver wrap
  • Joyear S50 red wrap
  • Joyear S50 blue wrap
  • Joyear S50 green wrap
  • Joyear S50 yellow wrap
  • Joyear S50 orange wrap
  • Joyear S50 purple wrap
  • Joyear S50 pink wrap
  • Joyear S50 teal wrap
  • Joyear S50 brown wrap
  • Joyear S50 gold wrap
  • Joyear S50 chrome wrap
  • Joyear S50 color shift wrap
  • Joyear S50 carbon fiber wrap
  • Joyear S50 camo and patterned wrap

How much vinyl to wrap a DongFeng Joyear S50

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowsedan (4 doors)182.3 in (4,630 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Joyear S50 wrap cost factors

Joyear S50 wrap cost depends on the film type, the number of panels and the surface condition. The car has four doors, a hood, a roof, a trunk and two bumpers. Removing badges, door handles or mirrors adds labor. A color change wrap on this sedan uses about 57 ft (17.5 m) of film, while a chrome or patterned film uses about 66 ft (20 m).

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).
  • Restyled in 2017: bumpers and lights differ between the versions, and so do the film cuts.

Joyear S50 wraps by generation

Swipe sideways. Tap a card for the full description.

DongFeng Joyear S50, first generation, factory photo
Factory color shown

2014–now Joyear S50 sedan (first generation)

2014–nowsedan (4 doors)182.3 in (4,630 mm)

The first generation Joyear S50 ran from 2014 and was restyled in 2017. The new bumpers and headlights mean precut kits are not interchangeable. An installer cutting film by hand can follow either version, but a pattern made for one bumper will not fit the other. For a full wrap, the total film need stays the same.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Joyear S50

A partial wrap on the Joyear S50 can cover the roof, hood or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is usually applied as a clear film on the front end: bumper, hood edge and mirror caps. Each job uses far less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a DongFeng Joyear S50: body, cut-outs and film

A DongFeng Joyear S50 vinyl wrap starts with the sedan's four-door body and its 182.3 in (4,630 mm) length. The doors, roof, hood, trunk, fenders and bumpers all take film. Compared with a hatchback or SUV, the sloping rear glass and short deck lid keep the total film area compact. The 2017 restyling changed the bumpers, so film patterns differ between early and late cars.

Joyear S50 wrap ideas often include cutting around door handles, mirrors and the front grille. The door handles are wrapped in small pieces or removed for a cleaner edge. The side mirrors come off for easier coverage of the caps. The front and rear bumpers need relief cuts around lights and parking sensors where fitted.

How much vinyl to wrap a Joyear S50 depends on the film width and any pattern. A solid color change uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 66 ft (20 m) because the installer matches the pattern direction. Cars built before the 2017 restyling can use the same total, but the bumper pieces are cut differently.

Questions about wrapping a DongFeng Joyear S50

How much vinyl does it take to wrap a DongFeng Joyear S50?

A DongFeng Joyear S50 full wrap takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. That figure covers the sedan body with a solid color and includes standard waste. If the film has a chrome or busy pattern, allow about 66 ft (20 m) to keep the pattern aligned.

Which years of the Joyear S50 take the same film cuts?

The Joyear S50 has one generation with a mid-cycle restyling in 2017. Cars from 2014 to 2016 share the early bumpers and lights. Cars from 2017 onward use the new bumpers and lights. A precut kit cut for one version will not fit the other, but hand-cut installers can work with either.

Can I wrap only the hood or the roof of a Joyear S50?

Yes, you can wrap only the hood or the roof of a Joyear S50. A roof wrap is a common partial job, and hood wraps are also done. Mirror caps can be wrapped on their own. These smaller jobs use much less film than a full color change wrap.

Is a Joyear S50 hard to wrap?

A Joyear S50 is not unusually hard to wrap, but a few points add work. The sloping rear window and short trunk lid are simple shapes. The 2017 bumpers have more defined lines that need careful stretching. Door handles and mirrors should be removed for the cleanest result, which adds time.