Wraps by car

DongFeng A30 wrap

This page covers the DongFeng A30 wrap: the first-generation sedan produced from 2014 to 2019. A full vinyl wrap of this compact car takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. The page includes size notes, panel details, and answers on partial wraps and chrome delete.

1generations17 mof film for a full wrap

DongFeng A30, first generation, factory photo
DongFeng A30, first generation. Factory color shown.

DongFeng A30 wrap colors and ideas

  • DongFeng A30 black wrap
  • DongFeng A30 white wrap
  • DongFeng A30 gray wrap
  • DongFeng A30 silver wrap
  • DongFeng A30 red wrap
  • DongFeng A30 blue wrap
  • DongFeng A30 green wrap
  • DongFeng A30 yellow wrap
  • DongFeng A30 orange wrap
  • DongFeng A30 purple wrap
  • DongFeng A30 pink wrap
  • DongFeng A30 teal wrap
  • DongFeng A30 brown wrap
  • DongFeng A30 gold wrap
  • DongFeng A30 chrome wrap
  • DongFeng A30 color shift wrap
  • DongFeng A30 carbon fiber wrap
  • DongFeng A30 camo and patterned wrap

How much vinyl to wrap a DongFeng A30

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–2019sedan (4 doors)178.3 in (4,530 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

DongFeng A30 wrap cost factors

DongFeng A30 wrap cost depends first on the film quality, the number of panels, and the labor time for a 178.3 in (4,530 mm) sedan. A full wrap uses about 56 ft (17 m) of 60-inch (1.52 m) cast film, and a chrome or patterned film adds about 8 ft (2.5 m) more. Partial jobs like the roof or hood use less material, while paint protection film on the front end costs more per square foot. The installer's experience and any body prep, such as paint correction, also change the final amount.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

DongFeng A30 wraps by generation

Swipe sideways. Tap a card for the full description.

DongFeng A30, first generation, factory photo
Factory color shown

2014–2019 DongFeng A30 sedan (first generation)

2014–2019sedan (4 doors)178.3 in (4,530 mm)

The first generation DongFeng A30 is a four-door sedan built from 2014 to 2019. Its length of 178.3 in (4,530 mm) means a full wrap needs about 56 ft (17 m) of 60-inch (1.52 m) cast film. The body has roughly 12 to 14 main panels, which is a normal count for a compact sedan. Chrome or patterned film requires about 64 ft (19.5 m) to allow pattern matching.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a DongFeng A30

A partial wrap on a DongFeng A30 can cover the roof, hood, or mirror caps without wrapping the whole car. A chrome delete covers the window trim and badges with black film, and paint protection film (PPF) covers the front end with clear film. These smaller jobs use far less film than a full wrap and are a way to change the look in steps.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a DongFeng A30: body, cut-outs and film

The DongFeng A30 vinyl wrap starts with a four-door sedan body 178.3 in (4,530 mm) long. The clean, simple shape keeps panel count and film waste low for a compact car. Because the body has no long roof rails or complex bumpers, a standard cast film install is straightforward. You will need about 56 ft (17 m) of 60-inch (1.52 m) film for a full color change wrap.

For DongFeng A30 wrap ideas, plan cut-outs around the door handles, mirrors, antenna base, and front and rear lights. The door handles and mirror caps come off to wrap those panels cleanly. The badges and window trim are often covered separately for a chrome delete. The front bumper needs careful trimming around the grille and fog light openings.

When you ask how much vinyl to wrap a DongFeng A30, this page covers the only generation, produced 2014–2019. No second body style or facelift changes the exterior size, so the film estimate stays about 56 ft (17 m). The one sedan shape means you do not need to adjust for a hatchback or wagon. Buying film for this single generation is simple because there is one length and width to order.

Questions about wrapping a DongFeng A30

How much vinyl does it take to wrap a DongFeng A30?

A full vinyl wrap of a DongFeng A30 takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. That figure covers the first-generation sedan body produced from 2014 to 2019. If you choose chrome or patterned film, plan for about 64 ft (19.5 m) to match patterns.

Can I wrap only the hood or the roof of a DongFeng A30?

Yes, you can wrap only the hood or the roof of a DongFeng A30. A partial wrap can also cover the mirror caps, and a chrome delete covers the window trim and badges. Paint protection film on the front end is another small-area option.

Is a DongFeng A30 hard to wrap?

A DongFeng A30 is not hard to wrap: the 178.3 in (4,530 mm) sedan body has simple lines and no complex curves. The door handles, mirror caps, and badges need to come off or be cut around, which adds some time. But a standard cast film install on this car is a typical job for a compact sedan.

How many generations of the DongFeng A30 does this page cover?

This page covers one generation of the DongFeng A30, produced from 2014 to 2019. There is no other generation in the catalog.