Wraps by car

DongFeng Mage wrap

The DongFeng Mage wrap page covers the first generation of the Mage, a 5-door SUV produced from 2024 onward. A full vinyl wrap of this body uses about 62 ft (19 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 70 ft (21.5 m) because of pattern matching and extra trim pieces.

1generations19 mof film for a full wrap

DongFeng Mage, first generation, factory photo
DongFeng Mage, first generation. Factory color shown.

DongFeng Mage wrap colors and ideas

  • Mage black wrap
  • Mage white wrap
  • Mage gray wrap
  • Mage silver wrap
  • Mage red wrap
  • Mage blue wrap
  • Mage green wrap
  • Mage yellow wrap
  • Mage orange wrap
  • Mage purple wrap
  • Mage pink wrap
  • Mage teal wrap
  • Mage brown wrap
  • Mage gold wrap
  • Mage chrome wrap
  • Mage color shift wrap
  • Mage carbon fiber wrap
  • Mage camo and patterned wrap

How much vinyl to wrap a DongFeng Mage

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowSUV (5 doors)184.4 in (4,685 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Mage wrap cost factors

Mage wrap cost depends on the amount of film, the film type, and the labor for this SUV's 14 panels. A full wrap uses about 62 ft (19 m) of 60-inch cast film, or about 70 ft (21.5 m) for chrome or patterned film. The cost also changes with the condition of the paint and the number of trim pieces removed. Wrapping the charge port door on plug-in and electric versions adds a small extra piece.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Mage wraps by generation

Swipe sideways. Tap a card for the full description.

DongFeng Mage, first generation, factory photo
Factory color shown

2024–now Mage SUV (first generation)

2024–nowSUV (5 doors)184.4 in (4,685 mm)

The first generation DongFeng Mage, produced from 2024 onward, is a 5-door SUV with a length of 184.4 in (4,685 mm). Its long roof and tall body sides increase the amount of film compared to a small car. The tailgate and bumpers are large panels that need careful stretching and trimming. The charge port door on plug-in and electric versions is wrapped as its own piece.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Mage

Instead of a full wrap, you can choose a partial wrap on the roof, hood, or mirror caps. A Mage chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less film and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a DongFeng Mage: body, cut-outs and film

A DongFeng Mage vinyl wrap covers a 5-door SUV that is 184.4 in (4,685 mm) long. The wrap is split into 14 panels: the roof, hood, tailgate, four doors, four fenders, rocker panels, bumpers, and mirror caps. The long roof and large body sides mean you need more film than on a smaller hatchback. The tailgate includes the rear glass, so the film stops at the glass edge.

When planning Mage wrap ideas, remember that the tailgate has the rear glass in it. The film ends at the edge of the glass, leaving the glass clear. On plug-in and electric versions, the charge port door is wrapped as a separate small piece. Removing door handles, mirrors, badges, and trim gives a cleaner edge and fewer cut-outs.

If you need to know how much vinyl to wrap a Mage, the answer is the same for every 2024-and-newer model. There is only one generation in this catalog, so all Mage SUVs have the same body dimensions. A color change uses about 62 ft (19 m) of 60-inch film. A chrome or patterned wrap uses about 70 ft (21.5 m) to allow for pattern matching and extra pieces.

Questions about wrapping a DongFeng Mage

How much vinyl does it take to wrap a DongFeng Mage?

Yes, a full wrap of a DongFeng Mage takes about 62 ft (19 m) of 60-inch cast film. For chrome or patterned film, the estimate is about 70 ft (21.5 m) to account for pattern matching and extra pieces. This covers the whole body of the 2024-and-newer SUV.

Can I wrap only the hood or the roof of a Mage?

Yes, you can wrap only the hood or the roof of a Mage. Partial wraps often include the roof, hood, or mirror caps. A chrome delete on the window trim and badges is another option. Paint protection film on the front end is also a partial job.

Is a Mage hard to wrap?

A Mage is not the easiest wrap because of its large panels and specific details. The tailgate has the rear glass in it, so the film must end at the glass edge. On plug-in and electric versions, the charge port door is wrapped as a separate small piece. The 184.4 in (4,685 mm) length means more film and more labor than on a small car.

How many generations of the Mage does this page cover?

This page covers one generation of the DongFeng Mage. The first generation has been produced from 2024 onward. There are no earlier generations in this catalog.