Wraps by car

DongFeng eπ 007 wrap

The Dongfeng eπ 007 wrap page covers the first generation, produced from 2024 to the present. This full-size sedan needs about 61 feet (18.5 meters) of 60-inch (1.52-meter) cast film for a full vinyl wrap. With chrome or patterned film, the amount rises to about 69 feet (21 meters).

1generations18.5 mof film for a full wrap

DongFeng eπ 007, first generation, factory photo
DongFeng eπ 007, first generation. Factory color shown.

DongFeng eπ 007 wrap colors and ideas

  • eπ 007 black wrap
  • eπ 007 white wrap
  • eπ 007 gray wrap
  • eπ 007 silver wrap
  • eπ 007 red wrap
  • eπ 007 blue wrap
  • eπ 007 green wrap
  • eπ 007 yellow wrap
  • eπ 007 orange wrap
  • eπ 007 purple wrap
  • eπ 007 pink wrap
  • eπ 007 teal wrap
  • eπ 007 brown wrap
  • eπ 007 gold wrap
  • eπ 007 chrome wrap
  • eπ 007 color shift wrap
  • eπ 007 carbon fiber wrap
  • eπ 007 camo and patterned wrap

How much vinyl to wrap a DongFeng eπ 007

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowsedan (4 doors)192.1 in (4,880 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

eπ 007 wrap cost factors

The eπ 007 wrap cost depends on the amount of film and the time the installer needs. A full wrap uses about 61 feet (18.5 meters) of cast film, which drives the material part of the quote. Chrome or patterned film needs about 69 feet (21 meters), so that choice changes the cost too.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).
  • Electric car: the charge port door is wrapped as a small piece of its own.

eπ 007 wraps by generation

Swipe sideways. Tap a card for the full description.

DongFeng eπ 007, first generation, factory photo
Factory color shown

2024–now eπ 007 sedan (first generation)

2024–nowsedan (4 doors)192.1 in (4,880 mm)

The first generation eπ 007 is a full-size sedan with four doors. Its 192.1-inch (4,880-millimeter) length means more panels than on a compact car. A full wrap needs about 61 feet (18.5 meters) of film, so the installer has to plan seams on the long roof and doors.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an eπ 007

If you do not want a full wrap, you can get a partial wrap on the roof, hood, or mirror caps. An eπ 007 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a DongFeng eπ 007: body, cut-outs and film

A Dongfeng eπ 007 vinyl wrap has to cover a long four-door sedan body. The car measures 192.1 inches (4,880 millimeters) from bumper to bumper. That length means a full wrap uses more film than a shorter sedan and takes more time to install.

The eπ 007 wrap ideas start with what has to come off for a clean install. You remove the badges, door handles, and mirror caps before laying film. The electric car's charge port door is wrapped as a small piece of its own. This lets the installer keep the port usable without cutting around it.

If you are counting how much vinyl to wrap an eπ 007, there is only one generation to plan for. The car has been made since 2024 with the same sedan body. You do not need to adjust film amounts between different production years.

Questions about wrapping a DongFeng eπ 007

How much vinyl does it take to wrap a DongFeng eπ 007?

A full wrap of a Dongfeng eπ 007 takes about 61 feet (18.5 meters) of 60-inch (1.52-meter) cast vinyl. With chrome or patterned film, you need about 69 feet (21 meters) because the pattern has to be matched. These numbers come from the first-generation sedan body.

Can I wrap only the hood or the roof of an eπ 007?

Yes, you can wrap only the hood or the roof of an eπ 007. A partial wrap on those panels uses less film than a full wrap. Mirror caps are another small job that changes the look without covering the whole car.

Is an eπ 007 hard to wrap?

An eπ 007 is not especially hard to wrap, but its size and charge port add work. The car is a full-size sedan at 192.1 inches (4,880 millimeters) long, so the installer has to handle large panels. The charge port door is wrapped as its own small piece to keep it working.

How many generations of the eπ 007 does this page cover?

This page covers one generation of the eπ 007. The car has been produced from 2024 to the present. There are no earlier body styles to plan for.