Wraps by car

DongFeng AX7 wrap

The DongFeng AX7 wrap page covers the first-generation SUV built from 2015 to 2021. A full wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan on about 72 ft (22 m).

1generations19 mof film for a full wrap

DongFeng AX7, first generation, factory photo
DongFeng AX7, first generation. Factory color shown.

DongFeng AX7 wrap colors and ideas

  • DongFeng AX7 black wrap
  • DongFeng AX7 white wrap
  • DongFeng AX7 gray wrap
  • DongFeng AX7 silver wrap
  • DongFeng AX7 red wrap
  • DongFeng AX7 blue wrap
  • DongFeng AX7 green wrap
  • DongFeng AX7 yellow wrap
  • DongFeng AX7 orange wrap
  • DongFeng AX7 purple wrap
  • DongFeng AX7 pink wrap
  • DongFeng AX7 teal wrap
  • DongFeng AX7 brown wrap
  • DongFeng AX7 gold wrap
  • DongFeng AX7 chrome wrap
  • DongFeng AX7 color shift wrap
  • DongFeng AX7 carbon fiber wrap
  • DongFeng AX7 camo and patterned wrap

How much vinyl to wrap a DongFeng AX7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–2021SUV (5 doors)184.6 in (4,690 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

DongFeng AX7 wrap cost factors

DongFeng AX7 wrap cost depends on the film type and the labor for this SUV. A color change wrap on the 184.6 in (4,690 mm) body needs about 62 ft (19 m) of cast film. The roof rails and bright trim add time, and cutting around sensors or cameras is extra work. The final cost reflects the installer's time and the film you choose.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

DongFeng AX7 wraps by generation

Swipe sideways. Tap a card for the full description.

DongFeng AX7, first generation, factory photo
Factory color shown

2015–2021 DongFeng AX7 SUV (first generation)

2015–2021SUV (5 doors)184.6 in (4,690 mm)

The first-generation DongFeng AX7 has roof rails on every trim. The rails come off before the roof is wrapped, or the film is cut along them. Taking them off gives a cleaner edge but adds labor, while cutting around them is quicker.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a DongFeng AX7

A partial wrap on the DongFeng AX7 can cover the roof, hood, or mirror caps. A chrome delete covers the window trim, decorative moldings, and badges with black film. Clear paint protection film (PPF) is often applied to the front end. These smaller jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a DongFeng AX7: body, cut-outs and film

The DongFeng AX7 vinyl wrap must cover a large five-door SUV body. The vehicle is 184.6 in (4,690 mm) long, so a full wrap uses more film than a small hatchback. Its tall sides and long roof add surface area, and installers work around the rear hatch and all four doors.

DongFeng AX7 wrap ideas must account for several factory features. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Some trims have a sunroof, and the roof film is cut around its opening. Every trim has roof rails that come off before the roof is wrapped or the film is cut along them. Bright decorative moldings stay bright next to the film unless a chrome delete covers them.

How much vinyl to wrap a DongFeng AX7 depends mainly on the body size. The first generation was offered only as this SUV, with no major body changes from 2015 to 2021. A full wrap needs about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 72 ft (22 m) because it has less stretch.

Questions about wrapping a DongFeng AX7

How much vinyl does it take to wrap a DongFeng AX7?

A full wrap of a DongFeng AX7 takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the total rises to about 72 ft (22 m).

Can the roof of a DongFeng AX7 be wrapped?

Yes, the roof of a DongFeng AX7 can be wrapped. The roof rails must come off or the film is cut along them. Some trims have a sunroof, so the film is cut around its opening.

Can I wrap only the hood or the roof of a DongFeng AX7?

Yes, you can wrap only the hood or the roof of a DongFeng AX7. A partial wrap often covers the roof, hood, or mirror caps. A chrome delete is another option for the window trim, decorative moldings, and badges.

Is a DongFeng AX7 hard to wrap?

The DongFeng AX7 is a large SUV, so a full wrap is more work than on a smaller car. The roof rails must be removed or cut around, and some trims have parking sensors and cameras that need cut-outs. Every trim has bright moldings that need extra care, and fog lamps in the front bumper require cut-outs.