Wraps by car

DongFeng H30 Cross wrap

The DongFeng H30 Cross wrap page covers the first-generation hatchback produced from 2014 to 2018. A full vinyl wrap of this subcompact car takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Choosing chrome or patterned film increases the estimate to about 66 ft (20 m).

1generations17 mof film for a full wrap

DongFeng H30 Cross, first generation, factory photo
DongFeng H30 Cross, first generation. Factory color shown.

DongFeng H30 Cross wrap colors and ideas

  • H30 Cross black wrap
  • H30 Cross white wrap
  • H30 Cross gray wrap
  • H30 Cross silver wrap
  • H30 Cross red wrap
  • H30 Cross blue wrap
  • H30 Cross green wrap
  • H30 Cross yellow wrap
  • H30 Cross orange wrap
  • H30 Cross purple wrap
  • H30 Cross pink wrap
  • H30 Cross teal wrap
  • H30 Cross brown wrap
  • H30 Cross gold wrap
  • H30 Cross chrome wrap
  • H30 Cross color shift wrap
  • H30 Cross carbon fiber wrap
  • H30 Cross camo and patterned wrap

How much vinyl to wrap a DongFeng H30 Cross

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–2018hatchback (5 doors)171.3 in (4,351 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

H30 Cross wrap cost factors

H30 Cross wrap cost depends on the amount of film the installer uses, the number of cut-outs, and how much trim comes off. A full wrap needs about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 66 ft (20 m) if the film is chrome or patterned. Extra work comes from the tailgate glass edge, sensors in the bumpers, and roof rails, which add labor time.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.

H30 Cross wraps by generation

Swipe sideways. Tap a card for the full description.

DongFeng H30 Cross, first generation, factory photo
Factory color shown

2014–2018 H30 Cross hatchback (first generation)

2014–2018hatchback (5 doors)171.3 in (4,351 mm)

The roof rails of the first-generation DongFeng H30 Cross are removed before the roof is wrapped, or the film is cut along them. On the 2014–2018 hatchback, leaving the rails in place gives a clean line only if the installer trims carefully. Removing them lets the film run under the rails and avoids a visible edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on an H30 Cross

An H30 Cross chrome delete covers the window trim, decorative moldings, and badges with black film. A partial wrap on this car can be limited to the roof, hood, and mirror caps. Paint protection film (PPF), a clear film on the front end, is also an option that leaves the color unchanged.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a DongFeng H30 Cross: body, cut-outs and film

A DongFeng H30 Cross vinyl wrap has to follow the shape of a five-door hatchback body. The car is 171.3 in (4,351 mm) long, so a single installer can reach every panel without special access equipment. The roofline and tailgate are the main areas that change how film is laid out.

H30 Cross wrap ideas should allow for the tailgate, which includes the rear glass, so film ends at the edge of the glass. Some trims have a sunroof and the roof film is cut around its opening. Every trim has roof rails that come off before the roof is wrapped or the film is cut along them. Bright decorative moldings stay bright next to the film unless a chrome delete covers them. Parking sensors in the bumpers require cutting the film around each sensor, and cameras in the body on some trims need a cut around each lens.

To work out how much vinyl to wrap an H30 Cross, start from the body of the only generation in the catalog, produced from 2014 to 2018. The estimate for a full wrap is about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 66 ft (20 m) of chrome or patterned film. There are no earlier or later generations with different panels, so the same figure applies across all production years.

Questions about wrapping a DongFeng H30 Cross

How much vinyl does it take to wrap a DongFeng H30 Cross?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a DongFeng H30 Cross. If the film is chrome or patterned, plan for about 66 ft (20 m). These figures cover the full body of the first-generation five-door hatchback.

Can the roof of an H30 Cross be wrapped?

Yes, the roof of an H30 Cross can be wrapped. On this model the film is cut around the sunroof opening on some trims. The roof rails are either removed for the wrap or the film is trimmed along them.

Can I wrap only the hood or the roof of an H30 Cross?

Yes, you can wrap only the hood or the roof of an H30 Cross. A partial wrap on this car often includes the roof, hood, and mirror caps together. The roof wrap still involves the roof rails or a cut along them.

Is an H30 Cross hard to wrap?

An H30 Cross is not hard to wrap, but it has more cut-outs than a simple sedan. The installer must cut around parking sensors in the bumpers and around cameras on some trims. The roof rails and the tailgate glass edge also add steps to a full wrap.