Wraps by car

Donkervoort D8 wrap

This page covers the Donkervoort D8 wrap, the vinyl wrap options for its one generation built from 2001 to 2007, and the film amounts needed. The first generation is a compact two-door convertible with a body length of 134.6 in (3,420 mm). Wrapping the full body uses about 34 ft (10.5 m) of 60-inch (1.52 m) cast film. The D8 is a small sports car with open bodywork that keeps the wrapped area tight.

1generations10.5 mof film for a full wrap

Donkervoort D8, first generation, factory photo
Donkervoort D8, first generation. Factory color shown.

Donkervoort D8 wrap colors and ideas

  • Donkervoort D8 black wrap
  • Donkervoort D8 white wrap
  • Donkervoort D8 gray wrap
  • Donkervoort D8 silver wrap
  • Donkervoort D8 red wrap
  • Donkervoort D8 blue wrap
  • Donkervoort D8 green wrap
  • Donkervoort D8 yellow wrap
  • Donkervoort D8 orange wrap
  • Donkervoort D8 purple wrap
  • Donkervoort D8 pink wrap
  • Donkervoort D8 teal wrap
  • Donkervoort D8 brown wrap
  • Donkervoort D8 gold wrap
  • Donkervoort D8 chrome wrap
  • Donkervoort D8 color shift wrap
  • Donkervoort D8 carbon fiber wrap
  • Donkervoort D8 camo and patterned wrap

How much vinyl to wrap a Donkervoort D8

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2007convertible (2 doors)134.6 in (3,420 mm)about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 39 ft (12 m)

Donkervoort D8 wrap cost factors

Donkervoort D8 wrap cost depends on the amount of film, the film type, and the labor for the small but detailed body. A full wrap takes about 34 ft (10.5 m) of 60-inch (1.52 m) cast film for a standard color. A chrome or patterned film raises the amount to about 39 ft (12 m) and needs more time for alignment. The cycle fenders, exposed suspension, and many small trim parts add hours to the job.

  • Film for a full wrap: about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 39 ft (12 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Donkervoort D8 wraps by generation

Swipe sideways. Tap a card for the full description.

Donkervoort D8, first generation, factory photo
Factory color shown

2001–2007 Donkervoort D8 convertible (first generation)

2001–2007convertible (2 doors)134.6 in (3,420 mm)

The open top of the first-generation Donkervoort D8 is not wrapped, and the film ends where the fabric or folding top begins. Installers run the vinyl up to the edge of the cockpit rim and trim it neatly along the seal. A folding hard top would be wrapped as separate panels, but on this car the roof is usually cloth. The area behind the seats and the small tonneau cover can be wrapped if they are painted body panels.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 39 ft (12 m).

Roof, hood, chrome delete and PPF on a Donkervoort D8

A partial wrap on the Donkervoort D8 can cover the hood, the mirror caps, or the rear deck. A chrome delete turns the window trim and badges black with film. Paint protection film (PPF) in clear film is often applied to the front end to guard against stone chips. These smaller jobs fit the car's size and leave the open cockpit and fabric top untouched.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Donkervoort D8: body, cut-outs and film

A Donkervoort D8 vinyl wrap covers a very small two-door convertible body that measures 134.6 in (3,420 mm). The car has no fixed roof structure beyond the open top, so the main wrapped surfaces are the hood, doors, and rear deck. Its compact size means a full wrap needs less film than most modern sports cars. The short overhangs and exposed wheels also reduce the amount of film that has to be trimmed around bumpers.

Donkervoort D8 wrap ideas start with the convertible body, where a fabric top is not wrapped and the film ends where it begins. A folding hard top would be wrapped as panels of its own, but the D8 typically uses a simple cloth roof. The small door mirrors and the narrow roll hoops behind the seats need careful relief cuts. Installers also remove the rear lights and the front cycle fenders to let film tuck cleanly around their edges.

To work out how much vinyl to wrap a Donkervoort D8, you only need figures for one generation because the catalog lists the first generation from 2001 to 2007. A plain color change uses about 34 ft (10.5 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, the estimate goes up to about 39 ft (12 m) to allow pattern matching. Since the car has no roof panel or large glasshouse, most of the film goes onto the lower body and the long hood.

Questions about wrapping a Donkervoort D8

How much vinyl does it take to wrap a Donkervoort D8?

A Donkervoort D8 needs about 34 ft (10.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you choose chrome or patterned film, plan for about 39 ft (12 m) because the pattern has to be matched. The number comes from the first-generation body that measures 134.6 in (3,420 mm) long. The open top and small body keep the total lower than a closed coupe of the same length.

Is the top of a Donkervoort D8 wrapped?

No, the top of a Donkervoort D8 is not wrapped when it is a fabric convertible top. The film ends where the folded or stretched fabric begins, so installers trim it at the cockpit edge. A folding hard top would be wrapped as its own panels, but that is not the standard roof on the D8.

Can I wrap only the hood or the roof of a Donkervoort D8?

Yes, you can wrap only the hood or the rear deck, or just the mirror caps, as part of a partial wrap on the Donkervoort D8. The roof itself is not a wrapped panel because the fabric top stays uncovered. Many owners choose a hood wrap or a rear deck wrap to change the look without a full color change.

Is a Donkervoort D8 hard to wrap?

A Donkervoort D8 adds some work because the convertible body has a fabric top that must be masked off, and the film ends where it begins. The car is small at 134.6 in (3,420 mm), which makes large panels easy, but the cycle fenders and exposed suspension create many tight edges. The short overhangs mean less film waste, while the roll hoops and small lights require careful trimming.