Wraps by car

Donkervoort F22 wrap

The Donkervoort F22 wrap page covers the first and only generation of this coupe, produced from 2022 onward. A full vinyl wrap of the newest body takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate rises to about 51 ft (15.5 m). The page explains the film amounts, the work involved, and the smaller wrap jobs you can choose.

1generations12 mof film for a full wrap

Donkervoort F22, first generation, factory photo
Donkervoort F22, first generation. Factory color shown.

Donkervoort F22 wrap colors and ideas

  • Donkervoort F22 black wrap
  • Donkervoort F22 white wrap
  • Donkervoort F22 gray wrap
  • Donkervoort F22 silver wrap
  • Donkervoort F22 red wrap
  • Donkervoort F22 blue wrap
  • Donkervoort F22 green wrap
  • Donkervoort F22 yellow wrap
  • Donkervoort F22 orange wrap
  • Donkervoort F22 purple wrap
  • Donkervoort F22 pink wrap
  • Donkervoort F22 teal wrap
  • Donkervoort F22 brown wrap
  • Donkervoort F22 gold wrap
  • Donkervoort F22 chrome wrap
  • Donkervoort F22 color shift wrap
  • Donkervoort F22 carbon fiber wrap
  • Donkervoort F22 camo and patterned wrap

How much vinyl to wrap a Donkervoort F22

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowcoupe (2 doors)159.0 in (4,039 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Donkervoort F22 wrap cost factors

The Donkervoort F22 wrap cost depends on the film you choose and on how many panels the installer has to work. A solid color wrap uses about 39 ft (12 m) of 60-inch film, while chrome or patterned film needs about 51 ft (15.5 m). The two long doors each go on as one piece, which adds labor time compared with smaller door skins. A partial job such as the hood or roof uses less film and less labor than a full wrap.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Donkervoort F22 wraps by generation

Swipe sideways. Tap a card for the full description.

Donkervoort F22, first generation, factory photo
Factory color shown

2022–now Donkervoort F22 coupe (first generation)

2022–nowcoupe (2 doors)159.0 in (4,039 mm)

The first generation Donkervoort F22 is a coupe with two long side doors and an overall length of 159.0 in (4,039 mm). This small body means the full wrap uses about 39 ft (12 m) of 60-inch cast film, which is less than many larger coupes. The two doors are the largest single panels on the car, so the installer works with long pieces rather than many small ones. With a 60-inch roll, the total panel count stays low, but careful door work remains the main part of the job.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Donkervoort F22

The Donkervoort F22 can also get a partial wrap on the roof, hood or mirror caps instead of the full body. A chrome delete covers the window trim and badges with black film for a darker look on the same coupe. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less film than the full 39 ft (12 m) estimate and focus on the parts you want to change or protect.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Donkervoort F22: body, cut-outs and film

A Donkervoort F22 vinyl wrap has to fit a compact coupe body with two long side doors and a total length of 159.0 in (4,039 mm). The small outer surface keeps the base film amount close to 39 ft (12 m), but the two large door skins add two big panels. The wrap has to be planned around the doors, the roof and the front and rear sections without a separate trunk lid. For a 60-inch film, the coupe body is covered with fewer panels than a larger car, but each panel is long and needs careful handling.

When you plan Donkervoort F22 wrap ideas, the two long side doors are each one large piece of film. That means each door skin has to be laid in a single pass, with no seams across the door. The windshield frame, the side mirrors and the small front grille are parts that need cut-outs or come off for a clean edge. If you add chrome or patterned film, you will buy about 51 ft (15.5 m) in total, not 39 ft.

If you ask how much vinyl to wrap a Donkervoort F22, the answer stays one figure because this page covers only the first generation, built from 2022 to now. There is no older body to compare, so the base estimate does not change. The coupe length is 159.0 in (4,039 mm), and the film estimate is about 39 ft (12 m) of 60-inch film for a solid color. For chrome or patterned film, the estimate is about 51 ft (15.5 m).

Questions about wrapping a Donkervoort F22

How much vinyl does it take to wrap a Donkervoort F22?

It takes about 39 ft (12 m) of 60-inch (1.52 m) cast film to wrap a Donkervoort F22 in a solid color. For chrome or patterned film, the amount rises to about 51 ft (15.5 m). These figures are for the first-generation coupe body, which is 159.0 in (4,039 mm) long.

Can I wrap only the hood or the roof of a Donkervoort F22?

Yes, you can wrap only the hood or the roof of a Donkervoort F22, as a partial wrap also covers mirror caps. A chrome delete on the window trim and badges is another smaller job, and clear paint protection film can go on the front end. These options use less film than a full wrap.

Is a Donkervoort F22 hard to wrap?

Yes, a Donkervoort F22 is hard to wrap because the two long side doors each have to be covered with one large piece of film. The coupe body is 159.0 in (4,039 mm) long, so those door pieces are long and need careful alignment. The installer also has to handle cut-outs around the windshield frame, mirrors and grille.

How many generations of the Donkervoort F22 does this page cover?

This page covers one generation of the Donkervoort F22, the first generation built from 2022 to now. There are no older or newer generations in the catalog for this model, so all film estimates on this page are for that single coupe body.