Wraps by car

Geely Atlas wrap

The Geely Atlas wrap page covers the first-generation SUV produced from 2016 to now. A full vinyl wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 69 ft (21 m).

1generations18.5 mof film for a full wrap

Geely Atlas, first generation, factory photo
Geely Atlas, first generation. Factory color shown.

Geely Atlas wrap colors and ideas

  • Atlas black wrap
  • Atlas white wrap
  • Atlas gray wrap
  • Atlas silver wrap
  • Atlas red wrap
  • Atlas blue wrap
  • Atlas green wrap
  • Atlas yellow wrap
  • Atlas orange wrap
  • Atlas purple wrap
  • Atlas pink wrap
  • Atlas teal wrap
  • Atlas brown wrap
  • Atlas gold wrap
  • Atlas chrome wrap
  • Atlas color shift wrap
  • Atlas carbon fiber wrap
  • Atlas camo and patterned wrap

How much vinyl to wrap a Geely Atlas

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowSUV (5 doors)105.1 in (2,670 mm) to 177.9 in (4,519 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Atlas wrap cost factors

The Atlas wrap cost depends on the amount and type of film, the body size of this SUV, and the labor for cut-outs and removed parts. A full wrap uses about 61 ft (18.5 m) of cast film, while chrome or patterned film takes about 69 ft (21 m). The tall roof and trim with sensors or cameras add time to the job.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (72.1 in (1,831 mm)): the roof is wrapped from a platform.
  • Restyled in 2019: bumpers and lights differ between the versions, and so do the film cuts.

Atlas wraps by generation

Swipe sideways. Tap a card for the full description.

Geely Atlas, first generation, factory photo
Factory color shown

2016–now Atlas SUV (first generation)

2016–nowSUV (5 doors)105.1 in (2,670 mm) to 177.9 in (4,519 mm)

The first-generation Geely Atlas was restyled in 2019, with new bumpers and lights. Film patterns cut for a 2016–2019 Atlas do not fit a post-2019 Atlas, and the reverse is also true. Before ordering pre-cut film, check which version of the front and rear you have.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (72.1 in (1,831 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Atlas

A partial wrap on a Geely Atlas can cover the roof, hood, or mirror caps. For Atlas chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is a clear option for the front end, applied to the bumper, hood, and fenders.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Geely Atlas: body, cut-outs and film

The Geely Atlas vinyl wrap is shaped by a five-door SUV body with a length from 105.1 in (2,670 mm) to 177.9 in (4,519 mm). A single roll of 60-inch film covers most panels without seams. The tall body means the roof is wrapped from a platform.

Atlas wrap ideas must allow for a tailgate with glass, so the film ends at the edge of the glass. Some trims have roof rails that come off before wrapping the roof, or the film is cut along them. Parking sensors in the bumpers need the film cut around each sensor, and cameras, fog lamps, and other parts also need cut-outs.

How much vinyl to wrap an Atlas depends on the version, because the 2019 restyling changed bumpers and lights. Film cut for one version does not fit the other. Counting film for a full wrap, the body needs about 61 ft (18.5 m), but chrome or patterned film adds about 8 ft (2.5 m).

Questions about wrapping a Geely Atlas

How much vinyl does it take to wrap a Geely Atlas?

A full Geely Atlas wrap takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 69 ft (21 m). Add a little extra for mistakes or complex areas like the bumpers.

Which years of the Atlas take the same film cuts?

The Atlas has one generation, so all years from 2016 to now share the same body, but the 2019 restyling changed the bumpers and lights. Film cut for the pre-2019 version does not fit the post-2019 version and vice versa. For the best fit, use cuts that match the production years of your Atlas.

Can I wrap only the hood or the roof of an Atlas?

Yes, you can wrap only the hood or the roof of an Atlas. A partial wrap can cover the roof, hood, or mirror caps. For example, a roof-only wrap uses less film and takes less time than a full wrap.

Is an Atlas hard to wrap?

An Atlas is not the hardest SUV to wrap, but it has details that add work. The tailgate has glass, so the film must end at the edge of the glass. Some trims have roof rails that need removal or cutting around. Parking sensors, cameras, and fog lamps need cut-outs, and the tall body requires a platform for the roof.