Wraps by car

Geely Emgrand 7 wrap

The Geely Emgrand 7 wrap page covers the mid-size sedan sold since 2016. It has one generation listed, produced from 2016 to now. A full vinyl wrap of the current body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

1generations17.5 mof film for a full wrap

Geely Emgrand 7, first generation, factory photo
Geely Emgrand 7, first generation. Factory color shown.

Geely Emgrand 7 wrap colors and ideas

  • Emgrand 7 black wrap
  • Emgrand 7 white wrap
  • Emgrand 7 gray wrap
  • Emgrand 7 silver wrap
  • Emgrand 7 red wrap
  • Emgrand 7 blue wrap
  • Emgrand 7 green wrap
  • Emgrand 7 yellow wrap
  • Emgrand 7 orange wrap
  • Emgrand 7 purple wrap
  • Emgrand 7 pink wrap
  • Emgrand 7 teal wrap
  • Emgrand 7 brown wrap
  • Emgrand 7 gold wrap
  • Emgrand 7 chrome wrap
  • Emgrand 7 color shift wrap
  • Emgrand 7 carbon fiber wrap
  • Emgrand 7 camo and patterned wrap

How much vinyl to wrap a Geely Emgrand 7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowsedan (4 doors)182.3 in (4,631 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Emgrand 7 wrap cost factors

Emgrand 7 wrap cost depends on the size of the car, the film type and the amount of disassembly. The sedan body needs about 57 ft (17.5 m) of cast film for a full color change wrap. Chrome or patterned film takes about 66 ft (20 m) because of pattern matching and extra trim pieces. The wrap shop also charges for time spent removing bumpers, lights and door handles.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Restyled in 2018: bumpers and lights differ between the versions, and so do the film cuts.

Emgrand 7 wraps by generation

Swipe sideways. Tap a card for the full description.

Geely Emgrand 7, first generation, factory photo
Factory color shown

2016–now Emgrand 7 sedan (first generation)

2016–nowsedan (4 doors)182.3 in (4,631 mm)

The first generation Geely Emgrand 7 was restyled in 2018. The bumpers and lights changed, so film cut for one version does not fit the other. The rest of the body panels stayed the same, but the new front and rear ends change the way film is cut.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on an Emgrand 7

An Emgrand 7 chrome delete or partial wrap is a smaller job than a full color change wrap. You can wrap just the roof, hood and mirror caps for a two-tone look. A chrome delete covers the window trim, decorative moldings and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Geely Emgrand 7: body, cut-outs and film

The Geely Emgrand 7 vinyl wrap covers one body style: a four-door sedan. Its length of 182.3 in (4,631 mm) means most of the film goes to the large roof, hood and side panels. The bumpers and rocker panels add more surface area than on a shorter car. A single roll of 60-inch film is enough for the full body without a roof pattern.

Emgrand 7 wrap ideas start with the parts that need cut-outs or come off during installation. Some trims have a sunroof, so the roof film is cut around its opening. Some trims have bright decorative moldings that stay bright next to the film unless a chrome delete covers them. Parking sensors and cameras in some trims also require the film to be cut around each sensor or lens.

How much vinyl to wrap an Emgrand 7 depends on the version you have. The first generation was restyled in 2018 with new bumpers and lights. Film cut for one version does not fit the other. The body length of 182.3 in (4,631 mm) is the same, but the bumper shapes change the total film needed.

Questions about wrapping a Geely Emgrand 7

How much vinyl does it take to wrap a Geely Emgrand 7?

A full wrap of a Geely Emgrand 7 takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 9 ft (2.5 m) more, so the total is about 66 ft (20 m). The exact amount depends on the version and whether you wrap the door jambs.

Can the roof of an Emgrand 7 be wrapped?

Yes, the roof of an Emgrand 7 can be wrapped. The roof is a large flat panel that takes film well. If your car has a sunroof, the installer cuts the film around the opening.

Which years of the Emgrand 7 take the same film cuts?

Emgrand 7 models from 2016 to 2018 have the same film cuts for the original bumpers and lights. After the 2018 restyling, the bumpers and lights changed, so film cut for one version does not fit the other. The rest of the body panels are the same for all years.

Can I wrap only the hood or the roof of an Emgrand 7?

Yes, you can wrap only the hood or the roof of an Emgrand 7. A partial wrap often includes the roof, hood and mirror caps. A chrome delete is another option that covers the window trim, decorative moldings and badges with black film.