Wraps by car

Geely Panda Mini wrap

The Geely Panda Mini wrap page covers the first generation of this electric hatchback from 2022 onward. A full vinyl wrap of the newest body takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs roughly 48 ft (14.5 m) because of extra trimming and matching.

1generations12 mof film for a full wrap

Geely Panda Mini, first generation, factory photo
Geely Panda Mini, first generation. Factory color shown.

Geely Panda Mini wrap colors and ideas

  • Panda Mini black wrap
  • Panda Mini white wrap
  • Panda Mini gray wrap
  • Panda Mini silver wrap
  • Panda Mini red wrap
  • Panda Mini blue wrap
  • Panda Mini green wrap
  • Panda Mini yellow wrap
  • Panda Mini orange wrap
  • Panda Mini purple wrap
  • Panda Mini pink wrap
  • Panda Mini teal wrap
  • Panda Mini brown wrap
  • Panda Mini gold wrap
  • Panda Mini chrome wrap
  • Panda Mini color shift wrap
  • Panda Mini carbon fiber wrap
  • Panda Mini camo and patterned wrap

How much vinyl to wrap a Geely Panda Mini

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowhatchback (3 doors)120.7 in (3,065 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Panda Mini wrap cost factors

Panda Mini wrap cost depends on the size of the panels, the film type, and the amount of disassembly. The car's 120.7 in (3,065 mm) length and three-door design mean fewer panels than a larger vehicle. A full wrap takes about 39 ft (12 m) of cast film, while chrome or patterned film takes about 48 ft (14.5 m). Labor is also affected by the tailgate glass and the separate charge port door.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Panda Mini wraps by generation

Swipe sideways. Tap a card for the full description.

Geely Panda Mini, first generation, factory photo
Factory color shown

2022–now Panda Mini hatchback (first generation)

2022–nowhatchback (3 doors)120.7 in (3,065 mm)

The first generation of the Geely Panda Mini is a 3-door hatchback produced from 2022 to the present. The small size and simple body lines make it an efficient car to wrap. The film estimate is about 39 ft (12 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 48 ft (14.5 m) because of pattern alignment.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Panda Mini

Partial wrap options for the Panda Mini include the roof, hood, and mirror caps. Panda Mini chrome delete covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end shields against stone chips. These jobs use less material than a full wrap and can be done without removing large panels.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Geely Panda Mini: body, cut-outs and film

The Geely Panda Mini vinyl wrap is made simpler by the car's compact dimensions and three-door hatchback body. At 120.7 in (3,065 mm) long, it uses less film than larger vehicles. The straight sides and minimal curves mean fewer relief cuts and less stretching. Each long side door can be covered with one large piece of film.

Panda Mini wrap ideas include a tailgate with the rear glass set into it, so the film ends at the edge of the glass. The two long side doors are each wrapped as a single large piece of film. The charge port door is wrapped separately with its own small piece. This electric car needs no cut-outs for exhausts or fuel doors.

How much vinyl to wrap a Panda Mini depends on the generation and the film type. The first generation, built from 2022 to now, is the only body in the catalog. The film estimate for this body is about 39 ft (12 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 48 ft (14.5 m).

Questions about wrapping a Geely Panda Mini

How much vinyl does it take to wrap a Geely Panda Mini?

It takes about 39 ft (12 m) of 60-inch (1.52 m) cast film to full wrap a Geely Panda Mini. For chrome or patterned film, the estimate is about 48 ft (14.5 m). This is based on the newest body, the first generation, which is a 3-door hatchback from 2022 onward.

Can I wrap only the hood or the roof of a Panda Mini?

Yes, you can wrap only the hood or the roof of a Panda Mini. Partial wraps on this car commonly include the roof, hood, and mirror caps. These are separate panels that do not require wrapping the entire vehicle.

Is a Panda Mini hard to wrap?

A Panda Mini is not hard to wrap for an experienced installer, but some details add work. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Each long side door is a large piece, and the charge port door is a separate small piece. These features require precise cutting and patience.

How many generations of the Panda Mini does this page cover?

This page covers one generation of the Panda Mini. The first generation has been produced from 2022 to the present. No earlier generations exist in this catalog.