Wraps by car

Geely Emgrand EV wrap

The Geely Emgrand EV wrap page covers the first and only generation of this electric sedan, produced since 2015. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film calls for about 66 ft (20 m). This guide explains what the wrap involves from the first cut to the final edge.

1generations17.5 mof film for a full wrap

Geely Emgrand EV, first generation, factory photo
Geely Emgrand EV, first generation. Factory color shown.

Geely Emgrand EV wrap colors and ideas

  • Emgrand EV black wrap
  • Emgrand EV white wrap
  • Emgrand EV gray wrap
  • Emgrand EV silver wrap
  • Emgrand EV red wrap
  • Emgrand EV blue wrap
  • Emgrand EV green wrap
  • Emgrand EV yellow wrap
  • Emgrand EV orange wrap
  • Emgrand EV purple wrap
  • Emgrand EV pink wrap
  • Emgrand EV teal wrap
  • Emgrand EV brown wrap
  • Emgrand EV gold wrap
  • Emgrand EV chrome wrap
  • Emgrand EV color shift wrap
  • Emgrand EV carbon fiber wrap
  • Emgrand EV camo and patterned wrap

How much vinyl to wrap a Geely Emgrand EV

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowsedan (4 doors)182.3 in (4,631 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Emgrand EV wrap cost factors

The Emgrand EV wrap cost is set by three things: the size of the sedan, the film you pick, and the work the body needs. The car is 182.3 in (4,631 mm) long, so a full wrap uses about 57 ft (17.5 m) of film. A chrome or patterned film pushes the total to about 66 ft (20 m). Cut-outs for the sensors, the charge port door, and the tow eye covers add time without adding film.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2018: bumpers and lights differ between the versions, and so do the film cuts.

Emgrand EV wraps by generation

Swipe sideways. Tap a card for the full description.

Geely Emgrand EV, first generation, factory photo
Factory color shown

2015–now Emgrand EV sedan (first generation)

2015–nowsedan (4 doors)182.3 in (4,631 mm)

The first generation Geely Emgrand EV was produced from 2015 to now, with a restyling in 2018 that changed the bumpers and lights. The body stayed a four-door sedan at 182.3 in (4,631 mm) long. Film cut for the 2015–2017 version does not fit the 2018–now version around the front and rear ends. The roof, doors, and rear quarters share the same cuts on both versions.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on an Emgrand EV

A partial wrap on an Emgrand EV chrome delete and other jobs lets you wrap the roof, hood, or mirror caps instead of the whole sedan. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) on the front end shields the hood, fenders, and mirror caps from stone chips. Each job uses less film than a full wrap and leaves the charge port door untouched.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Geely Emgrand EV: body, cut-outs and film

A Geely Emgrand EV vinyl wrap covers a four-door sedan that is 182.3 in (4,631 mm) long. The body has no door pillars below the glass line, so the sides go on as one large panel per door and rear quarter. The charge port door is wrapped as a small piece of its own. The roof and the pillars above the glass line add about one third to the total film of a full wrap.

The Emgrand EV wrap ideas that work best with this body start with the charge port door as a separate piece. The door handles come off for a clean edge, and the mirror caps wrap better off the car. The front and rear bumpers need relief cuts around the sensors and the tow eye covers. The rocker panels and the lower door edges call for a wider film allowance than the flat sides.

How much vinyl to wrap an Emgrand EV depends on the version you have, because 2018 brought a restyling with new bumpers and lights. A full wrap of the 2015–2017 sedan and a full wrap of the 2018–now sedan use the same film total, about 57 ft (17.5 m). The pattern of the cuts changes, so film cut for one version does not fit the other. Chrome and patterned film add about 9 ft (2.5 m) to the total.

Questions about wrapping a Geely Emgrand EV

How much vinyl does it take to wrap a Geely Emgrand EV?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap a Geely Emgrand EV in a solid color. Chrome or patterned film adds about 9 ft (2.5 m) for a total of about 66 ft (20 m). The estimate covers the newest body of the first generation, which has been produced since 2015. The charge port door is included as a small separate piece.

Which years of the Emgrand EV take the same film cuts?

The 2015–2017 Emgrand EV and the 2018–now Emgrand EV use different film cuts around the bumpers and lights. The 2018 restyling changed those parts, so film cut for one version does not fit the other. The roof, doors, and rear quarters share the same cuts across all years.

Can I wrap only the hood or the roof of an Emgrand EV?

Yes, you can wrap only the hood or the roof of an Emgrand EV instead of the whole sedan. The partial wrap options also include the mirror caps, a chrome delete of the window trim and badges, and paint protection film on the front end. Each job uses less film than a full wrap and leaves the charge port door untouched.

Is an Emgrand EV hard to wrap?

The Emgrand EV is not hard to wrap, but the electric charge port door adds one extra piece to cut and fit. The body is a straightforward four-door sedan at 182.3 in (4,631 mm) long, with no unusual shapes. The bumpers have sensors and tow eye covers that need relief cuts. A restyling in 2018 means the installer must know which version of the bumpers and lights the car has.