Wraps by car

Jeep Commander wrap

The Jeep Commander wrap page covers all three generations of this seven-seat SUV, from the 2005–2010 original through the 2018 and 2021 bodies. Each generation is listed with its own film estimate, based on its body length and wrap requirements. For the newest 2021–now Commander, a full vinyl wrap takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film.

3generations19.5 mof film for a full wrap

Jeep Commander, third generation, factory photo
Jeep Commander, third generation. Factory color shown.

Jeep Commander wrap colors and ideas

  • Commander black wrap
  • Commander white wrap
  • Commander gray wrap
  • Commander silver wrap
  • Commander red wrap
  • Commander blue wrap
  • Commander green wrap
  • Commander yellow wrap
  • Commander orange wrap
  • Commander purple wrap
  • Commander pink wrap
  • Commander teal wrap
  • Commander brown wrap
  • Commander gold wrap
  • Commander chrome wrap
  • Commander color shift wrap
  • Commander carbon fiber wrap
  • Commander camo and patterned wrap

How much vinyl to wrap a Jeep Commander

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)187.8 in (4,769 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
2018–nowSUV (5 doors)191.9 in (4,873 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)
2005–2010SUV (5 doors)188.5 in (4,787 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

Commander wrap cost factors

Commander wrap cost is driven by the film area of the body, which ranges from about 64 ft (19.5 m) for the newest generation to about 66 ft (20 m) for the second generation. Chrome or patterned film raises the estimate to between 72 and 80 ft (22–24.5 m), and every Commander tailgate needs precise trimming around the rear glass. A wrap on the first generation adds roof work for the sunroof cut-out and a platform for the 71.9 in (1,826 mm) tall body.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Commander wraps by generation

Swipe sideways. Tap a card for the full description.

Jeep Commander, third generation, factory photo
Factory color shown

2021–now Commander SUV (third generation)

2021–nowSUV (5 doors)187.8 in (4,769 mm)

The third-generation Jeep Commander, produced from 2021 onward, is a five-door SUV with a length of 187.8 in (4,769 mm). Its boxy body breaks into standard panels, and a full wrap takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. The tailgate glass is set into the panel, so the film ends neatly at its edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Jeep Commander, second generation, factory photo
Factory color shown

2018–now Commander SUV (second generation)

2018–nowSUV (5 doors)191.9 in (4,873 mm)

The second-generation Jeep Commander, which began in 2018 and is still built today, overlaps with the newer body from 2021 onward. If you own a Commander from 2021 or later, check whether your vehicle has the K8 body code or the H6 body code, because the two bodies differ in length and film amount. The K8 body is 191.9 in (4,873 mm) long and needs about 66 ft (20 m) of cast film for a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Jeep Commander, first generation, factory photo
Factory color shown

2005–2010 Commander SUV (first generation)

2005–2010SUV (5 doors)188.5 in (4,787 mm)

The first-generation Jeep Commander, sold from 2005 to 2010, is 188.5 in (4,787 mm) long and takes about 64 ft (19.5 m) of cast film for a full wrap. On a car of these years, paint may be original or repainted, and a test spot on one panel shows whether the film will bond safely. The tall body of 71.9 in (1,826 mm) also means the roof is wrapped from a platform for a clean finish.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (71.9 in (1,826 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a Commander

A partial wrap on a Commander can cover the roof, hood, or mirror caps without changing the whole vehicle. Commander chrome delete is done with black film on the window trim and badges, which gives the brightwork a darker look. Paint protection film (PPF) can be applied as a clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Jeep Commander: body, cut-outs and film

A Jeep Commander vinyl wrap follows the tall, boxy shape of this five-door SUV, which keeps panel sizes large and the film estimate close to 64 ft (19.5 m). The roof height of 71.9 in (1,826 mm) means installers work from a platform to reach the center cleanly. Because the body has few sharp creases, the film can be laid in fewer, bigger pieces on the doors and quarter panels.

Commander wrap ideas often start with the tailgate, where the film ends at the edge of the rear glass because the glass is set into the tailgate itself. On the 2018–now body, plug-in and electric versions have a charge port door that is wrapped as a small separate piece. First-generation models with a sunroof need the roof film cut around its opening, and every trim has fog lamps that call for cut-outs in the front bumper.

How much vinyl to wrap a Commander depends on which generation you own, because the three bodies differ in length and in the amount of patterned or chrome film they need. The 2005–2010 Commander is 188.5 in (4,787 mm) long and needs about 80 ft (24.5 m) of chrome or patterned film. The 2018–now body is 191.9 in (4,873 mm) long and needs about 76 ft (23 m) for the same material, while the 2021–now body uses about 72 ft (22 m).

Questions about wrapping a Jeep Commander

How much vinyl does it take to wrap a Jeep Commander?

A full wrap on the newest Jeep Commander takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. That estimate covers standard color change film on the 2021–now body; chrome or patterned film raises it to about 72 ft (22 m). The tailgate film ends at the edge of the rear glass, which is included in the panel count.

Can I wrap only the hood or the roof of a Commander?

Yes, you can wrap only the hood or the roof of a Commander, and both are offered as separate partial wrap jobs. Mirror caps and window trim are also common single pieces, and a chrome delete covers the bright trim and badges with black film. Clear paint protection film is another partial option for the front end.

Is a Commander hard to wrap?

A Commander adds some work because of its tall roof, which reaches 71.9 in (1,826 mm) and needs a platform for safe wrapping. The tailgate has the rear glass set into the panel, so the film must be trimmed exactly at the glass edge. On first-generation models, a sunroof means cutting around the opening, and every trim has fog lamps that require cut-outs in the bumper film.

How many generations of the Commander does this page cover?

This page covers three generations of the Jeep Commander, from the original 2005–2010 body through the 2018 and 2021 bodies. Each generation has its own film estimate, based on the length and body features of that model. The newest 2021–now Commander takes about 64 ft (19.5 m) of cast film for a full wrap.