Wraps by car

Jeep Wagoneer S wrap

The Jeep Wagoneer S wrap page covers the first generation, sold from 2024 to now. A full vinyl wrap of this electric SUV body takes about 69 ft (21 m) of standard 60-inch (1.52 m) cast film. The information here helps you plan the material and the work for this car.

1generations21 mof film for a full wrap

Jeep Wagoneer S, first generation, factory photo
Jeep Wagoneer S, first generation. Factory color shown.

Jeep Wagoneer S wrap colors and ideas

  • Wagoneer S black wrap
  • Wagoneer S white wrap
  • Wagoneer S gray wrap
  • Wagoneer S silver wrap
  • Wagoneer S red wrap
  • Wagoneer S blue wrap
  • Wagoneer S green wrap
  • Wagoneer S yellow wrap
  • Wagoneer S orange wrap
  • Wagoneer S purple wrap
  • Wagoneer S pink wrap
  • Wagoneer S teal wrap
  • Wagoneer S brown wrap
  • Wagoneer S gold wrap
  • Wagoneer S chrome wrap
  • Wagoneer S color shift wrap
  • Wagoneer S carbon fiber wrap
  • Wagoneer S camo and patterned wrap

How much vinyl to wrap a Jeep Wagoneer S

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowSUV (5 doors)192.4 in (4,886 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

Wagoneer S wrap cost factors

Wagoneer S wrap cost depends on the film type, the surface condition and the amount of design work. A full color change on the 192.4 in (4,886 mm) body uses about 69 ft (21 m) of standard cast film, while chrome or patterned film needs about 80 ft (24.5 m). The extra work around the tailgate glass and the small charge port piece also affects the quote.

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Wagoneer S wraps by generation

Swipe sideways. Tap a card for the full description.

Jeep Wagoneer S, first generation, factory photo
Factory color shown

2024–now Wagoneer S SUV (first generation)

2024–nowSUV (5 doors)192.4 in (4,886 mm)

The first generation Wagoneer S is a five-door SUV that measures 192.4 in (4,886 mm) from bumper to bumper. That size and body style break a full wrap into around twenty main panels: the roof, the hood, the doors, the fenders, the tailgate and the bumpers. The tall, boxy shape uses the full width of the 60-inch (1.52 m) film on most panels.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a Wagoneer S

A Wagoneer S chrome delete covers the window trim and the badges with black film. A partial wrap is also a good way to change just the roof, the hood or the mirror caps on this SUV. Paint protection film (PPF) on the front end adds a clear layer to the bumper, the hood and the fenders.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Jeep Wagoneer S: body, cut-outs and film

A Jeep Wagoneer S vinyl wrap covers a five-door SUV that is 192.4 in (4,886 mm) long. The upright panels and the tall sides of this body style add surface area to the job. You can expect more material than on a small hatchback, and the number of panels follows the normal SUV layout with the extra door.

Wagoneer S wrap ideas start with clean panel cuts around the tailgate that carries the rear glass. The film ends at the edge of the glass, not under the seal. The charge port door is an electric car detail and is wrapped as a small piece of its own.

How much vinyl to wrap a Wagoneer S stays the same for every car of this generation because there is only one body so far. The 2024 to now catalog entry shows one body and one size, so your film estimate does not change between trims. You count the same panels for any Wagoneer S from these years.

Questions about wrapping a Jeep Wagoneer S

How much vinyl does it take to wrap a Jeep Wagoneer S?

A full wrap of a Jeep Wagoneer S takes about 69 ft (21 m) of standard 60-inch (1.52 m) cast vinyl. That figure is for a color change on all painted panels of this electric SUV. With a chrome or patterned film you should allow about 80 ft (24.5 m).

Can I wrap only the hood or the roof of a Wagoneer S?

Yes, you can wrap only the hood or the roof of a Wagoneer S. A roof, hood or mirror cap wrap is a partial job that needs far less film than a full color change. A chrome delete on the trim and badges is another small option.

Is a Wagoneer S hard to wrap?

A Wagoneer S is not the easiest wrap, mainly because of the tailgate with the rear glass in it. The film has to end at the edge of the glass on that panel. The charge port door is a small separate piece that needs its own cut and install.

How many generations of the Wagoneer S does this page cover?

This page covers one generation of the Wagoneer S, sold from 2024 to now. The first generation is the only body in the catalog for this model. There is no older or newer body to compare yet.