Wraps by car

Leapmotor B01 wrap

The Leapmotor B01 wrap page covers the first generation (2025 to now) of this compact electric sedan. The four-door body measures 187.8 in (4,770 mm) and takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. This guide lists the areas that need cut-outs and what changes if you count film by panel.

1generations18 mof film for a full wrap

Leapmotor B01, first generation, factory photo
Leapmotor B01, first generation. Factory color shown.

Leapmotor B01 wrap colors and ideas

  • Leapmotor B01 black wrap
  • Leapmotor B01 white wrap
  • Leapmotor B01 gray wrap
  • Leapmotor B01 silver wrap
  • Leapmotor B01 red wrap
  • Leapmotor B01 blue wrap
  • Leapmotor B01 green wrap
  • Leapmotor B01 yellow wrap
  • Leapmotor B01 orange wrap
  • Leapmotor B01 purple wrap
  • Leapmotor B01 pink wrap
  • Leapmotor B01 teal wrap
  • Leapmotor B01 brown wrap
  • Leapmotor B01 gold wrap
  • Leapmotor B01 chrome wrap
  • Leapmotor B01 color shift wrap
  • Leapmotor B01 carbon fiber wrap
  • Leapmotor B01 camo and patterned wrap

How much vinyl to wrap a Leapmotor B01

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowsedan (4 doors)187.8 in (4,770 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Leapmotor B01 wrap cost factors

Leapmotor B01 wrap cost depends on the 187.8 in (4,770 mm) length of this sedan and the number of panels. A color change wrap uses about 59 ft (18 m) of film, while chrome or patterned film raises the amount to about 69 ft (21 m). The charge port door adds a small cut-out, and any removed trim adds labor.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).
  • Electric car: the charge port door is wrapped as a small piece of its own.

Leapmotor B01 wraps by generation

Swipe sideways. Tap a card for the full description.

Leapmotor B01, first generation, factory photo
Factory color shown

2025–now Leapmotor B01 sedan (first generation)

2025–nowsedan (4 doors)187.8 in (4,770 mm)

This first generation Leapmotor B01 (2025 to now) is a compact four-door sedan measuring 187.8 in (4,770 mm). The body has no long roof rails or large rear spoiler, so the panel count is standard for its size. A full wrap takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for solid colors.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Leapmotor B01

Partial wrap options for the Leapmotor B01 include the roof, the hood and the mirror caps as separate color change pieces. Chrome delete covers the window trim and badges with black film, which is a smaller job than a full wrap. Clear paint protection film (PPF) on the front end guards the hood, fenders and bumper from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Leapmotor B01: body, cut-outs and film

A Leapmotor B01 vinyl wrap on this sedan means roughly 59 ft (18 m) of cast film in a 60-inch (1.52 m) width. The four doors, long roofline and bumpers split the wrap into the usual panel count. Chrome or patterned film adds about 10 ft (3 m) because the pattern must line up across the panels.

Leapmotor B01 wrap ideas start with what comes off the car before you lay film. The charge port door is wrapped as a small piece of its own and is easiest to remove for a clean edge. The door handles and the trim around the side windows also need cut-outs, so plan those panels first.

To know how much vinyl to wrap a Leapmotor B01, measure from the first generation (2025 to now) as the only body. The four-door sedan uses about 59 ft (18 m) of 60-inch (1.52 m) film for a solid color change wrap. The 187.8 in (4,770 mm) length means the roof and both sides are cut from full runs of film.

Questions about wrapping a Leapmotor B01

How much vinyl does it take to wrap a Leapmotor B01?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap a Leapmotor B01 in a solid color. Chrome or patterned film needs about 69 ft (21 m) because the pattern must be matched across panels.

Can I wrap only the hood or the roof of a Leapmotor B01?

Yes, a Leapmotor B01 partial wrap can cover only the hood or the roof. The roof is a common single panel job, and the hood can be wrapped with one piece of film for a color change or paint protection.

Is a Leapmotor B01 hard to wrap?

A Leapmotor B01 is not unusually hard to wrap, but the charge port door needs a separate piece with a cut-out and is best removed. The 187.8 in (4,770 mm) length means long roof and side panels that require careful handling during install.

How many generations of the Leapmotor B01 does this page cover?

This page covers one generation of the Leapmotor B01, the first generation produced from 2025 to now.