Wraps by car

Leapmotor C10 wrap

A Leapmotor C10 wrap covers this first-generation SUV with a full vinyl wrap. The catalog holds one generation, produced from 2023 to the present. A full wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds up to about 61 ft (18.5 m).

1generations16.5 mof film for a full wrap

Leapmotor C10, first generation, factory photo
Leapmotor C10, first generation. Factory color shown.

Leapmotor C10 wrap colors and ideas

  • Leapmotor C10 black wrap
  • Leapmotor C10 white wrap
  • Leapmotor C10 gray wrap
  • Leapmotor C10 silver wrap
  • Leapmotor C10 red wrap
  • Leapmotor C10 blue wrap
  • Leapmotor C10 green wrap
  • Leapmotor C10 yellow wrap
  • Leapmotor C10 orange wrap
  • Leapmotor C10 purple wrap
  • Leapmotor C10 pink wrap
  • Leapmotor C10 teal wrap
  • Leapmotor C10 brown wrap
  • Leapmotor C10 gold wrap
  • Leapmotor C10 chrome wrap
  • Leapmotor C10 color shift wrap
  • Leapmotor C10 carbon fiber wrap
  • Leapmotor C10 camo and patterned wrap

How much vinyl to wrap a Leapmotor C10

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowSUV (5 doors)186.6 in (4,739 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Leapmotor C10 wrap cost factors

Leapmotor C10 wrap cost depends mainly on the size of the body and the film you choose. This SUV is 186.6 in (4,739 mm) long, so a full wrap uses about 54 ft (16.5 m) of cast film. A chrome or patterned film raises the amount to about 61 ft (18.5 m). The glass roof reduces the amount of film needed, but the roof rails and spoiler still add cutting time.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has a rear spoiler: it is wrapped as a piece of its own.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Leapmotor C10 wraps by generation

Swipe sideways. Tap a card for the full description.

Leapmotor C10, first generation, factory photo
Factory color shown

2023–now Leapmotor C10 SUV (first generation)

2023–nowSUV (5 doors)186.6 in (4,739 mm)

The first-generation Leapmotor C10 is the only body in this catalog, with production from 2023 to the present. The glass roof is not wrapped, so the roof stays dark whatever the color of the film. Because it is a five-door SUV with a length of 186.6 in (4,739 mm), every panel is large. Every trim has a rear spoiler, which is wrapped as a piece of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has a rear spoiler: it is wrapped as a piece of its own.

Some trims have cameras in the body: the film is cut around each lens.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Leapmotor C10

A Leapmotor C10 chrome delete covers the window trim and badges with black film. A partial wrap on this SUV includes the hood, mirror caps, tailgate, and rear spoiler. Paint protection film (PPF) is clear film laid on the front end only. These jobs leave the rest of the body in its original color.

  • Partial wrap: hood, mirror caps, tailgate, rear spoiler.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Leapmotor C10: body, cut-outs and film

A Leapmotor C10 vinyl wrap has to cover a five-door SUV body that is 186.6 in (4,739 mm) long. That is a large surface area, so the film is ordered in one run to avoid color differences. The sides are tall and mostly flat, which makes the main panels quicker to lay. The rear of the roof line curves down into a tailgate with glass, so the film ends at the glass edge.

Leapmotor C10 wrap ideas have to work around the glass roof that every trim has. Film is never laid on glass, so the roof color remains dark and the wrap stops at the roof rails. Some trims have cameras in the body, and the film is cut around each lens. The tailgate has the rear glass in it, and the charge port door is wrapped as a small piece of its own.

How much vinyl to wrap a Leapmotor C10 depends on the generation, but there is only one generation in the catalog. The 2023–now body is always the same SUV, so the film estimate stays the same. Any trim with chrome or a pattern adds about 7 ft (2 m) to the order. Because the roof is glass, no film is used on that part.

Questions about wrapping a Leapmotor C10

How much vinyl does it take to wrap a Leapmotor C10?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film to wrap a Leapmotor C10. If you choose chrome or patterned film, the amount rises to about 61 ft (18.5 m). This estimate covers the full body except the glass areas. The glass roof and the rear glass in the tailgate are never wrapped.

Can the roof of a Leapmotor C10 be wrapped?

No, the roof of a Leapmotor C10 cannot be wrapped because every trim has a panoramic glass roof. Glass is not wrapped, so the film ends at the roof rails. The roof itself stays dark. That means a full wrap always leaves the glass roof uncovered.

Can I wrap only the hood or the roof of a Leapmotor C10?

Yes, you can wrap only the hood or the roof of a Leapmotor C10 if you want a partial wrap. The catalog lists hood, mirror caps, tailgate, and rear spoiler as standard partial pieces. The roof is glass, so it is not wrapped. A chrome delete is another partial job that covers window trim and badges.

Is a Leapmotor C10 hard to wrap?

A Leapmotor C10 is not the easiest car to wrap because of its glass roof and size. The body is 186.6 in (4,739 mm) long, so a full wrap takes about 54 ft (16.5 m) of cast film. The tailgate has rear glass in it, and film ends at the glass edge. Some trims have body cameras, and each lens needs a careful cut-out.