Wraps by car

Leapmotor C16 wrap

The Leapmotor C16 wrap page covers the first-generation SUV from 2024 to now. A full vinyl wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. Chrome or patterned film options require about 82 ft (25 m) of the same width. This single generation makes material planning straightforward.

1generations20 mof film for a full wrap

Leapmotor C16, first generation, factory photo
Leapmotor C16, first generation. Factory color shown.

Leapmotor C16 wrap colors and ideas

  • Leapmotor C16 black wrap
  • Leapmotor C16 white wrap
  • Leapmotor C16 gray wrap
  • Leapmotor C16 silver wrap
  • Leapmotor C16 red wrap
  • Leapmotor C16 blue wrap
  • Leapmotor C16 green wrap
  • Leapmotor C16 yellow wrap
  • Leapmotor C16 orange wrap
  • Leapmotor C16 purple wrap
  • Leapmotor C16 pink wrap
  • Leapmotor C16 teal wrap
  • Leapmotor C16 brown wrap
  • Leapmotor C16 gold wrap
  • Leapmotor C16 chrome wrap
  • Leapmotor C16 color shift wrap
  • Leapmotor C16 carbon fiber wrap
  • Leapmotor C16 camo and patterned wrap

How much vinyl to wrap a Leapmotor C16

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowSUV (5 doors)193.5 in (4,915 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Leapmotor C16 wrap cost factors

The Leapmotor C16 wrap cost depends on the film amount and the roof access work. A full wrap uses about 66 ft (20 m) of 60-inch cast film, or 82 ft (25 m) for chrome or patterned film. The tall body means installers need a platform for the roof section. A partial job or chrome delete uses less material and less labor.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • A tall body (69.7 in (1,770 mm)): the roof is wrapped from a platform.

Leapmotor C16 wraps by generation

Swipe sideways. Tap a card for the full description.

Leapmotor C16, first generation, factory photo
Factory color shown

2024–now Leapmotor C16 SUV (first generation)

2024–nowSUV (5 doors)193.5 in (4,915 mm)

The first generation of the Leapmotor C16 runs from 2024 to now and is the only body style. Its height of 69.7 in (1,770 mm) means the roof is wrapped from a platform. That platform work adds time to a full wrap compared with a lower SUV. The tailgate glass and charge port door also add small cut-out steps.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

A tall body (69.7 in (1,770 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Leapmotor C16

A partial wrap on a Leapmotor C16 can cover just the roof, hood, and mirror caps. A chrome delete covers window trim and badges with black film for a cleaner look. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs use less vinyl than a full wrap and skip the tall roof work.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Leapmotor C16: body, cut-outs and film

The Leapmotor C16 vinyl wrap starts with a five-door SUV body that is 193.5 in (4,915 mm) long. That length means a full color change wrap needs the full 66 ft (20 m) of 60-inch cast film. The tall body at 69.7 in (1,770 mm) requires a platform for the roof section. Wrap installers cut film panels to follow the clean lines of the SUV shape.

Leapmotor C16 wrap ideas need to account for a tailgate that includes the rear glass. The film ends at the edge of that glass, so the tailgate is a single careful panel. The charge port door on plug-in and electric versions is wrapped as its own small piece. The roof adds work because the tall body means installers work from a platform.

How much vinyl to wrap a Leapmotor C16 depends on the film type you choose. The standard cast film estimate is about 66 ft (20 m) of 60-inch (1.52 m) material. Chrome or patterned film needs about 82 ft (25 m) because matching patterns adds waste. This page covers the first generation, so the figures stay the same for all 2024 and newer models.

Questions about wrapping a Leapmotor C16

How much vinyl does it take to wrap a Leapmotor C16?

A Leapmotor C16 takes about 66 ft (20 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film needs about 82 ft (25 m) of the same width. The taller body does not change the film estimate, but it adds time for roof access from a platform.

Can I wrap only the hood or the roof of a Leapmotor C16?

Yes, a partial wrap on a Leapmotor C16 can cover only the hood or the roof. The roof wrap still needs a platform because the body is 69.7 in (1,770 mm) tall. A hood wrap is a simple flat panel that uses one piece of film. You can also add mirror caps or a chrome delete later.

Is a Leapmotor C16 hard to wrap?

A Leapmotor C16 is not hard to wrap, but a few details add work. The tall body means the roof is wrapped from a platform. The tailgate glass must be trimmed to the edge, and the charge port door is a separate small piece. The SUV length of 193.5 in (4,915 mm) means more material and more panel seams.

How many generations of the Leapmotor C16 does this page cover?

This page covers one generation of the Leapmotor C16, produced from 2024 to now. The first-generation SUV is the only body style in the catalog. All wrap figures and notes on this page apply to that generation.