Wraps by car

Leapmotor C11 wrap

A Leapmotor C11 wrap covers the whole SUV with vinyl wrap film. This page covers the first generation, produced from 2020 to now. A full wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds up to about 72 ft (22 m).

1generations19.5 mof film for a full wrap

Leapmotor C11, first generation, factory photo
Leapmotor C11, first generation. Factory color shown.

Leapmotor C11 wrap colors and ideas

  • Leapmotor C11 black wrap
  • Leapmotor C11 white wrap
  • Leapmotor C11 gray wrap
  • Leapmotor C11 silver wrap
  • Leapmotor C11 red wrap
  • Leapmotor C11 blue wrap
  • Leapmotor C11 green wrap
  • Leapmotor C11 yellow wrap
  • Leapmotor C11 orange wrap
  • Leapmotor C11 purple wrap
  • Leapmotor C11 pink wrap
  • Leapmotor C11 teal wrap
  • Leapmotor C11 brown wrap
  • Leapmotor C11 gold wrap
  • Leapmotor C11 chrome wrap
  • Leapmotor C11 color shift wrap
  • Leapmotor C11 carbon fiber wrap
  • Leapmotor C11 camo and patterned wrap

How much vinyl to wrap a Leapmotor C11

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)187.0 in (4,750 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Leapmotor C11 wrap cost factors

Leapmotor C11 wrap cost depends on film choice, body size and how much labor the shop must put into disassembly. The SUV body is 187.0 in (4,750 mm) long and needs about 64 ft (19.5 m) of 60-inch (1.52 m) film for a full color change wrap. A chrome delete or partial wrap uses less film but still requires time for edges and small parts. Shops quote the job after seeing the car and the finish the owner wants.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2025: bumpers and lights differ between the versions, and so do the film cuts.

Leapmotor C11 wraps by generation

Swipe sideways. Tap a card for the full description.

Leapmotor C11, first generation, factory photo
Factory color shown

2020–now Leapmotor C11 SUV (first generation)

2020–nowSUV (5 doors)187.0 in (4,750 mm)

The first generation Leapmotor C11 was restyled in 2025, which changed the bumpers and lights. Film cut for a 2020 to 2024 C11 does not fit a 2025 or later example because the front and rear shapes differ. An installer should use a kit that matches the car's production year. The rest of the body dimensions stay close to the original 187.0 in (4,750 mm) length.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Leapmotor C11

A partial wrap on a Leapmotor C11 can cover the roof, hood or mirror caps instead of the whole SUV. A chrome delete changes the bright trim on the window surrounds and badges to black film. Paint protection film (PPF) as a clear film on the front end protects the hood, bumper and mirrors from stone chips. These jobs use less film than a full wrap but still need careful cutting around the charge port door and rear glass.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Leapmotor C11: body, cut-outs and film

The Leapmotor C11 vinyl wrap has to cover a five-door SUV body that measures 187.0 in (4,750 mm) long. The large flat side panels and tall doors use film efficiently but still need careful handling. The rear hatch and glass add a tall vertical area that an installer must plan around. A full wrap on this body style needs a film with enough stretch for the bumpers and lower edges.

Leapmotor C11 wrap ideas work best when the installer plans cut-outs and removable parts early. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The electric charge port door is wrapped as a small piece of its own. Door handles, badges and mirror caps are removed for a cleaner finish around those areas.

To calculate how much vinyl to wrap a Leapmotor C11, measure the first generation body as a five-door SUV. A full wrap of the 187.0 in (4,750 mm) long body uses about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. The 2025 restyling changed the bumpers and lights, so film cut for the earlier version does not fit the updated one. Always confirm the production version before ordering film.

Questions about wrapping a Leapmotor C11

How much vinyl does it take to wrap a Leapmotor C11?

A Leapmotor C11 takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you choose a chrome or patterned film, allow about 72 ft (22 m) to match the pattern across the body. These figures fit the newest first generation body, which is 187.0 in (4,750 mm) long.

Which years of the Leapmotor C11 take the same film cuts?

The Leapmotor C11 years that take the same film cuts are 2020 to 2024, before the restyling. The 2025 restyling changed the bumpers and lights, so a 2025 or later car needs different film templates. A single first generation badge covers all years, but the film kits differ between early and late production.

Can I wrap only the hood or the roof of a Leapmotor C11?

Yes, you can wrap only the hood or the roof of a Leapmotor C11. A partial wrap often covers the roof, hood or mirror caps, and a shop can cut film for just those panels. The hood is flat enough for a single installer to lay film without help. The roof has no seam because the panel is one piece on this SUV.

Is a Leapmotor C11 hard to wrap?

A Leapmotor C11 is not hard to wrap, but two details add work. The tailgate has the rear glass in it, so the film must end at the edge of the glass and cannot wrap around the glass edge. The electric charge port door is wrapped as a small piece of its own, which means an extra seam and more trimming. The SUV body is 187.0 in (4,750 mm) long, so a full wrap uses about 64 ft (19.5 m) of 60-inch (1.52 m) film and a careful plan for the large side panels.