Wraps by car

Lifan Breez (520) wrap

A Lifan Breez (520) wrap covers a compact car produced from 2007 to 2012 in hatchback and sedan forms. The catalog holds one generation of this model. A full vinyl wrap of the newest body uses about 52 to 54 feet (16 to 16.5 meters) of film.

1generations16.5 mof film for a full wrap

Lifan Breez (520), first generation, factory photo
Lifan Breez (520), first generation. Factory color shown.

Lifan Breez (520) wrap colors and ideas

  • Breez (520) black wrap
  • Breez (520) white wrap
  • Breez (520) gray wrap
  • Breez (520) silver wrap
  • Breez (520) red wrap
  • Breez (520) blue wrap
  • Breez (520) green wrap
  • Breez (520) yellow wrap
  • Breez (520) orange wrap
  • Breez (520) purple wrap
  • Breez (520) pink wrap
  • Breez (520) teal wrap
  • Breez (520) brown wrap
  • Breez (520) gold wrap
  • Breez (520) chrome wrap
  • Breez (520) color shift wrap
  • Breez (520) carbon fiber wrap
  • Breez (520) camo and patterned wrap

How much vinyl to wrap a Lifan Breez (520)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2012hatchback, sedan (4 or 5 doors)159.1 in (4,040 mm) to 172.0 in (4,370 mm)about 52 ft (16 m) for the hatchback to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

Breez (520) wrap cost factors

Breez (520) wrap cost is driven by the film amount, the body style, and the prep work. The sedan takes slightly more material than the hatchback: about 54 ft (16.5 m) instead of 52 ft (16 m). A chrome delete or a patterned film raises the film figure to about 62 ft (19 m). The bright moldings and possible fog lamp cut-outs also add labor time.

  • Film for a full wrap: about 52 ft (16 m) for the hatchback to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Breez (520) wraps by generation

Swipe sideways. Tap a card for the full description.

Lifan Breez (520), first generation, factory photo
Factory color shown

2007–2012 Breez (520) hatchback, sedan (first generation)

2007–2012hatchback, sedan (4 or 5 doors)159.1 in (4,040 mm) to 172.0 in (4,370 mm)

The first generation Lifan Breez (520) was built from 2007 to 2012 as a hatchback or a sedan. The car has four or five doors depending on the body style. The style you pick decides the panel plan and the film amount. A wrap on the sedan uses about two feet more film than on the hatchback.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) for the hatchback to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Breez (520)

A partial wrap on a Breez (520) can cover the roof, the hood, or the mirror caps. You can also wrap only the window trim, the decorative moldings, and the badges as a chrome delete. Paint protection film (PPF) is a clear film that goes on the front end only. Each of these jobs uses far less material than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lifan Breez (520): body, cut-outs and film

The Lifan Breez (520) vinyl wrap needs a plan that matches its two body styles. The hatchback and sedan measure from 159.1 inches (4,040 mm) to 172.0 inches (4,370 mm) long. That size puts the car in the compact class, so the panel count is moderate. The style you wrap decides how much film the job takes.

Breez (520) wrap ideas start with the tailgate, where the rear glass sits in the panel. The film ends at the edge of that glass and needs a clean cut line. Every trim has bright decorative moldings that stay bright next to the film unless a chrome delete covers them. Some trims have fog lamps in the front bumper, so the bumper film needs cut-outs.

How much vinyl to wrap a Breez (520) depends on the body style and the film you pick. 60-inch (1.52 m) cast film runs about 52 ft (16 m) for the hatchback and 54 ft (16.5 m) for the sedan. Chrome or patterned film can take up to about 62 ft (19 m). Count the full panel set before you order your roll.

Questions about wrapping a Lifan Breez (520)

How much vinyl does it take to wrap a Lifan Breez (520)?

A full wrap of a Lifan Breez (520) needs about 52 to 54 feet (16 to 16.5 meters) of vinyl. The hatchback takes about 52 ft (16 m), and the sedan takes about 54 ft (16.5 m) with 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for up to about 62 ft (19 m).

Which Breez (520) body takes more film?

The sedan body takes more film than the hatchback on a Breez (520). The sedan estimate is about 54 ft (16.5 m), while the hatchback is about 52 ft (16 m) with 60-inch (1.52 m) cast film. The extra length of the sedan body explains the difference.

Can I wrap only the hood or the roof of a Breez (520)?

Yes, you can wrap only the hood or the roof of a Breez (520). A partial wrap on this car often covers the roof, the hood, or the mirror caps. That job uses much less film than a full vinyl wrap.

Is a Breez (520) hard to wrap?

A Breez (520) is not hard to wrap, but a few details add work. The tailgate has the rear glass in it, so the film must end cleanly at the glass edge. Bright decorative moldings on every trim need a chrome delete if you want them dark. Some trims have fog lamps in the front bumper, and those need cut-outs in the bumper film. The compact size at up to 172.0 in (4,370 mm) keeps the panel count moderate.