Wraps by car

Lifan X70 wrap

The Lifan X70 wrap page covers the first-generation SUV produced from 2017 to the present. This body style is a five-door SUV with a length of 172.8 in (4,390 mm). A full vinyl wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

1generations18 mof film for a full wrap

Lifan X70, first generation, factory photo
Lifan X70, first generation. Factory color shown.

Lifan X70 wrap colors and ideas

  • Lifan X70 black wrap
  • Lifan X70 white wrap
  • Lifan X70 gray wrap
  • Lifan X70 silver wrap
  • Lifan X70 red wrap
  • Lifan X70 blue wrap
  • Lifan X70 green wrap
  • Lifan X70 yellow wrap
  • Lifan X70 orange wrap
  • Lifan X70 purple wrap
  • Lifan X70 pink wrap
  • Lifan X70 teal wrap
  • Lifan X70 brown wrap
  • Lifan X70 gold wrap
  • Lifan X70 chrome wrap
  • Lifan X70 color shift wrap
  • Lifan X70 carbon fiber wrap
  • Lifan X70 camo and patterned wrap

How much vinyl to wrap a Lifan X70

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowSUV (5 doors)172.8 in (4,390 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Lifan X70 wrap cost factors

The Lifan X70 wrap cost depends on the size of the SUV and the film you choose. The body is 172.8 in (4,390 mm) long, so a full wrap uses about 59 ft (18 m) of 60-inch cast film. A chrome or patterned film raises the amount to about 69 ft (21 m) because of matching the design. Removing the roof rails and cutting around sensors or cameras adds labor time.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Lifan X70 wraps by generation

Swipe sideways. Tap a card for the full description.

Lifan X70, first generation, factory photo
Factory color shown

2017–now Lifan X70 SUV (first generation)

2017–nowSUV (5 doors)172.8 in (4,390 mm)

The first-generation Lifan X70 has roof rails on every trim that must be handled during a wrap. The rails come off before the roof is wrapped, or the installer cuts the film along them. Removing the rails gives a cleaner edge and protects the film from lifting later. Cutting along the rails takes less time but leaves a visible seam at the rail base.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Lifan X70

A partial wrap on a Lifan X70 covers the roof, hood, or mirror caps instead of the whole body. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap but still need careful cutting around the roof rails and sensors.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lifan X70: body, cut-outs and film

The Lifan X70 vinyl wrap follows the shape of a midsize five-door SUV. The 172.8 in (4,390 mm) length means the film is cut in long side panels from front to rear bumper. The tall roof and large door areas add surface that a small hatchback would not have. The wrap installer works around the rear glass in the tailgate, so the film ends at its edge.

Lifan X70 wrap ideas start with the parts that need cut-outs or come off the body. Every trim has roof rails that are removed before the roof is wrapped, or the film is cut along them. Some trims have a sunroof, so the roof film is cut around its opening. Every trim has fog lamps in the front bumper, and some trims have parking sensors or cameras that need film cut around each lens.

How much vinyl to wrap a Lifan X70 changes with the size of the body and the parts on it. The first generation is the only body in the catalog, produced from 2017 until now, and its dimensions stay the same. A wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate is about 69 ft (21 m) because the pattern must be matched.

Questions about wrapping a Lifan X70

How much vinyl does it take to wrap a Lifan X70?

A Lifan X70 takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, the amount goes up to about 69 ft (21 m). The figure is for the newest body style, which is the first generation produced from 2017 to now.

Can the roof of a Lifan X70 be wrapped?

Yes, the roof of a Lifan X70 can be wrapped. Every trim has roof rails that come off before the roof is wrapped, or the film is cut along them. Some trims have a sunroof, so the roof film is cut around its opening. The roof is a popular partial wrap area and uses less film than a full wrap.

Can I wrap only the hood or the roof of a Lifan X70?

Yes, you can wrap only the hood or the roof of a Lifan X70. A partial wrap often includes the roof, hood, and mirror caps. A clear paint protection film is also an option for the front end. These smaller jobs use less film than a full wrap.

Is a Lifan X70 hard to wrap?

A Lifan X70 wrap adds work because of its size and the parts on every trim. The body is 172.8 in (4,390 mm) long, so large side panels must be handled carefully. Every trim has roof rails that come off or need film cut along them. Some trims have a sunroof, parking sensors, or cameras that require precise cut-outs.