Wraps by car

Lifan X60 wrap

The Lifan X60 wrap guide covers this SUV in its single generation, which began in 2012 and is still produced. A full vinyl wrap of the latest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 8 ft (2.5 m) more, for a total near 67 ft (20.5 m).

1generations18 mof film for a full wrap

Lifan X60, first generation, factory photo
Lifan X60, first generation. Factory color shown.

Lifan X60 wrap colors and ideas

  • Lifan X60 black wrap
  • Lifan X60 white wrap
  • Lifan X60 gray wrap
  • Lifan X60 silver wrap
  • Lifan X60 red wrap
  • Lifan X60 blue wrap
  • Lifan X60 green wrap
  • Lifan X60 yellow wrap
  • Lifan X60 orange wrap
  • Lifan X60 purple wrap
  • Lifan X60 pink wrap
  • Lifan X60 teal wrap
  • Lifan X60 brown wrap
  • Lifan X60 gold wrap
  • Lifan X60 chrome wrap
  • Lifan X60 color shift wrap
  • Lifan X60 carbon fiber wrap
  • Lifan X60 camo and patterned wrap

How much vinyl to wrap a Lifan X60

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–nowSUV (5 doors)170.3 in (4,325 mm) to 173.4 in (4,405 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Lifan X60 wrap cost factors

Lifan X60 wrap cost depends on the film type, the condition of the paint, and how many parts come off. A color change needs about 59 ft (18 m) of cast film, while chrome or patterned film takes about 67 ft (20.5 m). Roof rails, badges, and bumpers with sensors add labor time to the job.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2015, 2016: bumpers and lights differ between the versions, and so do the film cuts.

Lifan X60 wraps by generation

Swipe sideways. Tap a card for the full description.

Lifan X60, first generation, factory photo
Factory color shown

2012–now Lifan X60 SUV (first generation)

2012–nowSUV (5 doors)170.3 in (4,325 mm) to 173.4 in (4,405 mm)

The first generation Lifan X60, sold from 2012 to now, got restylings in 2015 and 2016. Those updates changed the bumpers and lights, so film patterns for one version do not match the other. The body length shifted from 170.3 in (4,325 mm) to 173.4 in (4,405 mm). All versions are five-door SUVs.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Lifan X60

A partial wrap on a Lifan X60 can cover the roof, hood, or mirror caps without doing the whole vehicle. A chrome delete turns the window trim, decorative moldings, and badges black with film. Paint protection film (PPF) in clear film shields the front end from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lifan X60: body, cut-outs and film

The Lifan X60 vinyl wrap is shaped by its five-door SUV body, with a length from 170.3 in (4,325 mm) to 173.4 in (4,405 mm). The upright sides and flat roof make large panels easier to cover in one piece. Door handles and the tailgate edges are the main points that need extra film for tucking.

Lifan X60 wrap ideas start with the tailgate, where the rear glass sits in the panel and the film ends at its edge. Roof rails come off before the roof is wrapped, or the film is cut along them. Some trims add a sunroof, parking sensors, cameras, fog lamps, or bright decorative moldings that need careful cut-outs.

How much vinyl to wrap a Lifan X60 depends on the version: the 2015 and 2016 restylings changed bumpers and lights, so film cut for one does not fit the other. The basic body remains the same, so the total film estimate stays near 59 ft (18 m). Extra film is needed for patterned or chrome options.

Questions about wrapping a Lifan X60

How much vinyl does it take to wrap a Lifan X60?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap a Lifan X60 fully. For chrome or patterned film, plan on about 67 ft (20.5 m) because of extra pattern matching. The estimate covers the newest body after the 2016 restyling.

Can the roof of a Lifan X60 be wrapped?

Yes, the roof of a Lifan X60 can be wrapped on its own. The roof rails must be removed or the film cut along them for a clean edge. If the car has a sunroof, the film is cut around its opening.

Which years of the Lifan X60 take the same film cuts?

The 2012 to 2014 Lifan X60 models take the same film cuts. The 2015 and 2016 restylings changed bumpers and lights, so each version after those years needs its own patterns.

Can I wrap only the hood or the roof of a Lifan X60?

Yes, you can wrap only the hood or the roof of a Lifan X60 as a partial wrap. The text lists roof, hood, and mirror caps as common partial jobs. A chrome delete or paint protection film (PPF) on the front end are other partial options.