Wraps by car

Lifan Myway wrap

The Lifan Myway wrap page covers this seven-seat SUV and the vinyl wrap a full wrap of its first generation takes. The catalog lists one generation of the Myway, produced from 2016 to now. A full wrap of the Myway uses about 59 ft (18 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 69 ft (21 m).

1generations18 mof film for a full wrap

Lifan Myway, first generation, factory photo
Lifan Myway, first generation. Factory color shown.

Lifan Myway wrap colors and ideas

  • Myway black wrap
  • Myway white wrap
  • Myway gray wrap
  • Myway silver wrap
  • Myway red wrap
  • Myway blue wrap
  • Myway green wrap
  • Myway yellow wrap
  • Myway orange wrap
  • Myway purple wrap
  • Myway pink wrap
  • Myway teal wrap
  • Myway brown wrap
  • Myway gold wrap
  • Myway chrome wrap
  • Myway color shift wrap
  • Myway carbon fiber wrap
  • Myway camo and patterned wrap

How much vinyl to wrap a Lifan Myway

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowSUV (5 doors)174.8 in (4,440 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Myway wrap cost factors

A Myway wrap cost depends on the size of the SUV, the film finish, and the time for cut-outs and trim. With a body length of 174.8 in (4,440 mm), the Myway is a mid-size SUV, so a full wrap uses about 59 ft (18 m) of cast film. A chrome or patterned film raises the material amount to about 69 ft (21 m). The cost also reflects the work around the roof rails, parking sensors, fog lamps, and any cameras, which need precise cutting.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Myway wraps by generation

Swipe sideways. Tap a card for the full description.

Lifan Myway, first generation, factory photo
Factory color shown

2016–now Myway SUV (first generation)

2016–nowSUV (5 doors)174.8 in (4,440 mm)

The first generation Myway has roof rails on every trim, and they add a step to the wrap. The roof rails can be removed before the film goes on, or the installer can cut the film along their bases. Removing them gives a cleaner edge but takes more time. If the rails stay on, the roof film has short seams close to each rail.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Myway

A partial wrap on the Myway can cover the roof, hood, or mirror caps. A chrome delete covers the window trim, decorative moldings, and badges with black film. Paint protection film (PPF) can be placed as clear film on the front end. These jobs use less film than a full wrap and can be done one at a time.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lifan Myway: body, cut-outs and film

A Lifan Myway vinyl wrap covers a five-door SUV body that is 174.8 in (4,440 mm) long. The Myway has a tall roof and fairly flat sides, so the film lays down without much stretching. The tailgate is large, so a full wrap of the rear uses more film than a small hatch. The roof area is also bigger than on a lower car, which adds material to the estimate.

Myway wrap ideas work around the tailgate with its rear glass and the roof rails found on every trim. The tailgate film ends at the edge of the glass, so the glass area stays uncovered. Roof rails come off before the roof is wrapped, or the film is cut along them. Some trims have a sunroof, so the roof film is cut around its opening. Bright decorative moldings on some trims can stay bright or receive a chrome delete.

How much vinyl to wrap a Myway stays the same across the years of this generation: the body size has not changed from 2016 to now. All Myway SUVs are built on the same 174.8 in (4,440 mm) length, so the film area for a full wrap is the same. The estimate of about 59 ft (18 m) of cast film fits every year of this generation. Only the finish of the film, such as chrome or pattern, changes the amount to about 69 ft (21 m).

Questions about wrapping a Lifan Myway

How much vinyl does it take to wrap a Lifan Myway?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap a Lifan Myway. For chrome or patterned film, the amount is about 69 ft (21 m). These figures cover the whole body of the newest and only body style, a five-door SUV. Extra film may be needed for mistakes or for wrapping door jambs.

Can the roof of a Myway be wrapped?

Yes, the roof of a Myway can be wrapped. The roof film is cut around the roof rails if they stay on, or the rails are removed first for a seamless look. On trims with a sunroof, the film is trimmed around the sunroof opening. The roof is a large, mostly flat area, so it is a straightforward panel to wrap.

Can I wrap only the hood or the roof of a Myway?

Yes, you can wrap only the hood or the roof of a Myway. A partial wrap commonly covers the roof, hood, or mirror caps. These small jobs use much less film than a full wrap and can be done quickly. A roof wrap pairs well with a chrome delete for a two-tone look.

Is a Myway hard to wrap?

A Myway is not hard to wrap, but a few things add work. The roof rails must be removed or cut around, and every trim has parking sensors and fog lamps that need cut-outs. Some trims have cameras and bright moldings that require extra care. The body length of 174.8 in (4,440 mm) means more surface to cover than a small car, but the shape is fairly simple.