Wraps by car

Lotus Eclat wrap

The Lotus Eclat wrap page covers the 1975–1986 first generation coupe. This sports car takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. Chrome or patterned film raises the estimate to about 56 ft (17 m).

1generations15 mof film for a full wrap

Lotus Eclat, first generation, factory photo
Lotus Eclat, first generation. Factory color shown.

Lotus Eclat wrap colors and ideas

  • Eclat black wrap
  • Eclat white wrap
  • Eclat gray wrap
  • Eclat silver wrap
  • Eclat red wrap
  • Eclat blue wrap
  • Eclat green wrap
  • Eclat yellow wrap
  • Eclat orange wrap
  • Eclat purple wrap
  • Eclat pink wrap
  • Eclat teal wrap
  • Eclat brown wrap
  • Eclat gold wrap
  • Eclat chrome wrap
  • Eclat color shift wrap
  • Eclat carbon fiber wrap
  • Eclat camo and patterned wrap

How much vinyl to wrap a Lotus Eclat

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1975–1986coupe (2 doors)175.5 in (4,458 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Eclat wrap cost factors

Eclat wrap cost depends on the film area and the paint condition of the car. A full wrap of this 175.5 in (4,458 mm) long coupe uses about 49 ft (15 m) of film. Paint that is original or repainted can change the amount of prep work.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Eclat wraps by generation

Swipe sideways. Tap a card for the full description.

Lotus Eclat, first generation, factory photo
Factory color shown

1975–1986 Eclat coupe (first generation)

1975–1986coupe (2 doors)175.5 in (4,458 mm)

The first generation Lotus Eclat was produced from 1975 to 1986 as a coupe. Paint on a car of these years may be original or repainted, so a test spot comes before a full wrap. Removing old paint defects takes extra time before the film goes on.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on an Eclat

For an Eclat, a partial wrap can cover the roof, hood, or mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Lotus Eclat: body, cut-outs and film

A Lotus Eclat vinyl wrap starts with a coupe body that is 175.5 in (4,458 mm) long. The two long side doors are each large enough for one piece of film per door. The smooth, uncluttered sides of the Eclat leave fewer body lines to work around.

Eclat wrap ideas include covering the full body or adding accents to the long doors. The two side doors are the largest panels and give a clean canvas for a design. Chrome trim around the windows can be wrapped in black film for a modern look.

If you want to know how much vinyl to wrap an Eclat, measure a car from this generation before cutting. A full wrap of the coupe uses about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs roughly 56 ft (17 m) to match the pattern.

Questions about wrapping a Lotus Eclat

How much vinyl does it take to wrap a Lotus Eclat?

A Lotus Eclat takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. The figure comes from the film estimate for the newest body of the car. Chrome or patterned film raises the amount to about 56 ft (17 m).

Can I wrap only the hood or the roof of an Eclat?

Yes, you can wrap only the hood or the roof of an Eclat. A partial wrap on this car can cover the roof, hood, or mirror caps. You can also apply paint protection film to the front end without wrapping the whole car.

Is an Eclat hard to wrap?

An Eclat is not especially hard to wrap, but its two long side doors add work. Each door is one large piece of film, so you need a steady hand during application. The car's 175.5 in (4,458 mm) length also means more film to handle.

How many generations of the Eclat does this page cover?

This page covers one generation of the Lotus Eclat. The car in the catalog is the first generation, produced from 1975 to 1986. The only body style in this generation is the coupe.