Wraps by car

Lotus Europa wrap

The Lotus Europa wrap page covers the first and only generation of this small coupe, built from 1970 to 1976. A full vinyl wrap of the Europa takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. This classic sports car has a coupe body with two doors and a length of 175.0 in (4,445 mm).

1generations12 mof film for a full wrap

Lotus Europa, first generation, factory photo
Lotus Europa, first generation. Factory color shown.

Lotus Europa wrap colors and ideas

  • Europa black wrap
  • Europa white wrap
  • Europa gray wrap
  • Europa silver wrap
  • Europa red wrap
  • Europa blue wrap
  • Europa green wrap
  • Europa yellow wrap
  • Europa orange wrap
  • Europa purple wrap
  • Europa pink wrap
  • Europa teal wrap
  • Europa brown wrap
  • Europa gold wrap
  • Europa chrome wrap
  • Europa color shift wrap
  • Europa carbon fiber wrap
  • Europa camo and patterned wrap

How much vinyl to wrap a Lotus Europa

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1970–1976coupe (2 doors)175.0 in (4,445 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m)

Europa wrap cost factors

Europa wrap cost depends on the area wrapped, the film chosen, and the age of the paint under the film. The full body needs about 39 ft (12 m) of 60-inch (1.52 m) cast film, so a coupe of this size takes less material than a larger car. A partial wrap of the hood or roof uses a fraction of that film. A chrome delete on the window trim and badges adds a second film and more cut work, while paint protection film (PPF) on the front end is priced by the panels covered.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Europa wraps by generation

Swipe sideways. Tap a card for the full description.

Lotus Europa, first generation, factory photo
Factory color shown

1970–1976 Europa coupe (first generation)

1970–1976coupe (2 doors)175.0 in (4,445 mm)

The first generation Lotus Europa was produced from 1970 to 1976 as a two-door coupe. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The long doors and low tail make panel alignment important when the film is laid down. A full wrap uses about 39 ft (12 m) of 60-inch (1.52 m) film, with extra film needed if the body has hidden corrosion or wavy panels.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).

Roof, hood, chrome delete and PPF on an Europa

A partial wrap on a Lotus Europa can cover the roof, hood, or mirror caps without wrapping the rest of the car. A chrome delete turns the bright window trim and badges black with cut pieces of film. Paint protection film (PPF) on the front end is a clear layer over the nose, front bumper area, and the leading edge of the hood. Each of these jobs uses less film than the full 39 ft (12 m) of 60-inch (1.52 m) wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Lotus Europa: body, cut-outs and film

A Lotus Europa vinyl wrap works with the coupe shape and the short 175.0 in (4,445 mm) body. The two long side doors are each one large piece of film that needs careful handling. Most of the film goes on the long doors and the low tail, while the small panel sizes help keep a full wrap within the 39 ft (12 m) estimate.

Europa wrap ideas start with the door surface, because each long side door is one large piece of film. The window trim and badges can be covered with black film in a chrome delete. A clear paint protection film (PPF) on the front end covers the nose and the front edge of the hood.

Knowing how much vinyl to wrap an Europa means knowing that only one generation was made, from 1970 to 1976. Film coverage on every Europa of those years follows the same coupe body and 175.0 in (4,445 mm) length. Planning for a color change wrap on this first generation uses the full 39 ft (12 m) of 60-inch (1.52 m) film for the whole body.

Questions about wrapping a Lotus Europa

How much vinyl does it take to wrap a Lotus Europa?

A full wrap of a Lotus Europa takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. This figure comes from the coupe body of 175.0 in (4,445 mm) and the two long doors. For chrome or patterned film, plan on about 44 ft (13.5 m) to allow matching across the doors.

Can I wrap only the hood or the roof of an Europa?

Yes, you can wrap only the hood or the roof of an Europa. A partial wrap on the hood, roof, or mirror caps uses a smaller piece of film and leaves the rest of the car untouched. The hood is a single panel that suits a color change or a matte finish, while the roof can be blacked out with gloss film.

Is an Europa hard to wrap?

An Europa is a small car, but the long doors add work to a wrap. Each door is one large piece of film that must be laid without wrinkles or air pockets, which takes time and a steady hand. The low tail and the small rear window also require careful trimming. A full wrap is easier with two people, but the 39 ft (12 m) of 60-inch (1.52 m) film is enough for the whole coupe.

How many generations of the Europa does this page cover?

This page covers one generation of the Europa. The Lotus Europa was built from 1970 to 1976 as a single generation with a coupe body. The film estimate given here applies to every Europa of those years.