Wraps by car

Lotus Eletre wrap

This page covers the Lotus Eletre wrap, from a full vinyl wrap to smaller jobs on the first-generation SUV. The Eletre is a five-door electric SUV that appeared in 2022 and is still in production. A complete wrap of this body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 76 ft (23 m).

1generations20.5 mof film for a full wrap

Lotus Eletre, first generation, factory photo
Lotus Eletre, first generation. Factory color shown.

Lotus Eletre wrap colors and ideas

  • Eletre black wrap
  • Eletre white wrap
  • Eletre gray wrap
  • Eletre silver wrap
  • Eletre red wrap
  • Eletre blue wrap
  • Eletre green wrap
  • Eletre yellow wrap
  • Eletre orange wrap
  • Eletre purple wrap
  • Eletre pink wrap
  • Eletre teal wrap
  • Eletre brown wrap
  • Eletre gold wrap
  • Eletre chrome wrap
  • Eletre color shift wrap
  • Eletre carbon fiber wrap
  • Eletre camo and patterned wrap

How much vinyl to wrap a Lotus Eletre

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)200.9 in (5,103 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Eletre wrap cost factors

Eletre wrap cost depends on the film area of the SUV body, the film type, and the labor for cut-outs. The full body is 200.9 in (5,103 mm) long, so it needs about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 9 ft (2.5 m) to the material. The charge port door and the tailgate edge at the glass add small extra steps.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Eletre wraps by generation

Swipe sideways. Tap a card for the full description.

Lotus Eletre, first generation, factory photo
Factory color shown

2022–now Eletre SUV (first generation)

2022–nowSUV (5 doors)200.9 in (5,103 mm)

The first-generation Lotus Eletre is a large five-door SUV, so a full wrap calls for a high panel count. Each door, the roof, the hood, the tailgate, and both bumpers are wrapped as separate panels. The tailgate includes the rear glass, so the film ends at the edge of the glass. Because it is an electric car, the charge port door is wrapped as its own small piece.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on an Eletre

Partial wrap jobs on a Lotus Eletre include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear option for the front end. These smaller jobs leave the rest of the factory finish visible.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Lotus Eletre: body, cut-outs and film

A Lotus Eletre vinyl wrap covers a 200.9 in (5,103 mm) long SUV body with five doors. The length means more film than on a compact car, and the large roof panel adds to the total. The tailgate is a single large piece because the rear glass sits inside it. The charge port door is a separate small piece that must be cut and wrapped on its own.

Eletre wrap ideas often include the roof, hood, and mirror caps as a partial wrap. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is usually applied to the front end to guard against stone chips. The tailgate edge at the glass and the charge port door are the main cut-out areas on this car.

If you need to know how much vinyl to wrap an Eletre, start with the first-generation body size. The 2022–now SUV is 200.9 in (5,103 mm) long and has five doors. A full wrap uses about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. If the wrap includes chrome or patterned film, the amount rises to about 76 ft (23 m).

Questions about wrapping a Lotus Eletre

How much vinyl does it take to wrap a Lotus Eletre?

A Lotus Eletre takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film for a full wrap. If the wrap uses chrome or patterned film, the amount is about 76 ft (23 m). This is the estimate for the first-generation SUV from 2022 onward.

Can I wrap only the hood or the roof of an Eletre?

Yes, you can wrap only the hood or the roof of an Eletre. Partial wrap jobs on this SUV include the roof, hood, and mirror caps. A chrome delete on the window trim and badges is another small option. These jobs use far less film than a full wrap.

Is an Eletre hard to wrap?

An Eletre is a large SUV, so it takes more time and film than a smaller car. The tailgate has the rear glass inside it, so the film must end neatly at the edge of the glass. The charge port door is wrapped as a separate small piece. These details add a few careful steps.

How many generations of the Eletre does this page cover?

This page covers one generation of the Eletre. The Lotus Eletre is a first-generation model that has been in production since 2022. The wrapping notes here are for that SUV body.