Wraps by car

Lotus Exige wrap

The Lotus Exige wrap guide covers all three generations of the model, from the 2001 first generation to the 2022 third generation. A full wrap of the newest Exige body takes about 39 ft (12 m) of 60-inch (1.52 m) cast vinyl wrap. Chrome or patterned film on that body needs about 51 ft (15.5 m). The Exige is a compact two-seat sports car with a mid-engine layout, which gives it a short rear deck and pronounced side scoops.

3generations12 mof film for a full wrap

Lotus Exige, third generation, factory photo
Lotus Exige, third generation. Factory color shown.

Lotus Exige wrap colors and ideas

  • Exige black wrap
  • Exige white wrap
  • Exige gray wrap
  • Exige silver wrap
  • Exige red wrap
  • Exige blue wrap
  • Exige green wrap
  • Exige yellow wrap
  • Exige orange wrap
  • Exige purple wrap
  • Exige pink wrap
  • Exige teal wrap
  • Exige brown wrap
  • Exige gold wrap
  • Exige chrome wrap
  • Exige color shift wrap
  • Exige carbon fiber wrap
  • Exige camo and patterned wrap

How much vinyl to wrap a Lotus Exige

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2022convertible, coupe (2 doors)160.8 in (4,084 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)
2004–2011coupe (2 doors)148.8 in (3,780 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)
2001–2004coupe (2 doors)148.8 in (3,780 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

Exige wrap cost factors

The Exige wrap cost depends on the film choice, the number of cut-outs, and the condition of the original paint. A chrome or patterned film needs about 51 ft (15.5 m) on the third generation, which is more material than the 39 ft (12 m) for a standard cast film. Installing a wrap on a convertible means extra work where the film ends at the fabric top. The age of the car also matters because older panels may need more preparation before the film goes on.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Exige wraps by generation

Swipe sideways. Tap a card for the full description.

Lotus Exige, third generation, factory photo
Factory color shown

2011–2022 Exige convertible, coupe (third generation)

2011–2022convertible, coupe (2 doors)160.8 in (4,084 mm)

On the third generation Lotus Exige, a convertible top is not wrapped, and the film ends at the edge where the fabric begins. A folding hard top is wrapped as its own pair of panels, so the film can move with the roof when it opens. The installer trims the film cleanly along the top of the windshield frame and behind the doors. This keeps the wrap from peeling when the roof is lowered or raised.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Lotus Exige, second generation, factory photo
Factory color shown

2004–2011 Exige coupe (second generation)

2004–2011coupe (2 doors)148.8 in (3,780 mm)

On a second generation Exige from 2004–2011, panels may be original or repainted, and a test spot comes before a full wrap. The installer puts a small piece of film on each major panel and checks adhesion before wrapping the car. If a panel was repainted with a low-quality finish, the film may pull paint when it is removed. A test spot on the door, roof, and rear quarter shows which panels need more preparation.

Two long side doors: each door is one large piece of film.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Lotus Exige, first generation, factory photo
Factory color shown

2001–2004 Exige coupe (first generation)

2001–2004coupe (2 doors)148.8 in (3,780 mm)

The first generation Exige is a 148.8 in (3,780 mm) coupe with a small two-seat body and a fixed roof. Its size means the wrap uses about 41 ft (12.5 m) of 60-inch (1.52 m) film, more than the second generation because of its shape. The body has clean lines without deep side scoops, so the installer can wrap each large panel in one piece. The two long doors and the rear hatch are the biggest pieces of the wrap.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on an Exige

An Exige chrome delete covers the window trim and badges with black film, and a partial wrap can do just the roof, hood, or mirror caps. Paint protection film (PPF) on the front end is clear film that protects the nose, bumper, and mirror caps from stone chips. A partial wrap uses less film than a full wrap, and the installer can match the factory color or choose a contrasting finish. These smaller jobs are a way to change the look of one area without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Lotus Exige: body, cut-outs and film

A Lotus Exige vinyl wrap has to follow a small, tight body with deep sculpting around the rear wheels. The third generation is 160.8 in (4,084 mm) long and comes as a convertible or coupe, while both earlier coupes are 148.8 in (3,780 mm) long. Every Exige has two long side doors that are each wrapped as one large piece of film. The short overhangs and low nose mean the installer works with many small, curved sections rather than large flat panels.

Exige wrap ideas often focus on the exposed composite areas and the contrast between the body and the roof. The side intakes, rear diffuser, and front splitter need cut-outs because the film cannot stretch into deep recesses without lifting. Door handles, mirrors, and the rear wing come off for a clean wrap, and the wrap ends where a fabric convertible top begins.

How much vinyl to wrap an Exige depends on the generation because the bodies differ in length and roof type. The first generation coupe takes about 41 ft (12.5 m) of film, while the second generation coupe takes about 38 ft (11.5 m). The third generation convertible or coupe takes about 39 ft (12 m), but a convertible adds separate panels for the folding hard top if it has one.

Questions about wrapping a Lotus Exige

How much vinyl does it take to wrap a Lotus Exige?

A Lotus Exige full wrap takes about 39 ft (12 m) of 60-inch (1.52 m) cast vinyl film on the newest body. That is the estimate for the third generation, whether coupe or convertible. Using chrome or patterned film adds waste, so the amount goes up to about 51 ft (15.5 m). The older generations take slightly different amounts because of their body shapes.

Is the top of an Exige wrapped?

No, the fabric top of an Exige convertible is not wrapped, and the film ends at its edge. A folding hard top is wrapped as its own panels, so the film moves with the roof. The installer trims the vinyl cleanly along the windshield header, the side windows, and the rear deck. This leaves the top in its original material and prevents peeling when the roof opens.

Which Exige body takes more film?

The first generation Exige coupe takes more film than the second or third generation, at about 41 ft (12.5 m). The second generation coupe takes about 38 ft (11.5 m), and the third generation takes about 39 ft (12 m). The difference comes from the first generation's longer rear deck and simpler shape. The third generation convertible's folding hard top is wrapped as separate panels, which adds material if the car has one.

Can I wrap only the hood or the roof of an Exige?

Yes, an Exige can get a partial wrap on the hood, roof, or mirror caps, or a chrome delete on the window trim and badges. A partial wrap uses less film than a full wrap and can change one area of the car at a time. The roof and hood are wrapped as single panels, and the mirror caps are small pieces that come off for a clean finish. Paint protection film on the front end is clear film that protects the nose and mirror caps.