Wraps by car

Maxus eDeliver 7 wrap

A Maxus eDeliver 7 wrap covers the full body of this electric minivan with vinyl film. The catalog shows one generation, produced from 2025 onward. The first-generation body measures 196.8 in (4,998 mm) to 211.2 in (5,364 mm) in length. A full wrap of the newest body takes about 90 ft (27.5 m) of 60-inch (1.52 m) cast film.

1generations27.5 mof film for a full wrap

Maxus eDeliver 7 wrap colors and ideas

  • eDeliver 7 black wrap
  • eDeliver 7 white wrap
  • eDeliver 7 gray wrap
  • eDeliver 7 silver wrap
  • eDeliver 7 red wrap
  • eDeliver 7 blue wrap
  • eDeliver 7 green wrap
  • eDeliver 7 yellow wrap
  • eDeliver 7 orange wrap
  • eDeliver 7 purple wrap
  • eDeliver 7 pink wrap
  • eDeliver 7 teal wrap
  • eDeliver 7 brown wrap
  • eDeliver 7 gold wrap
  • eDeliver 7 chrome wrap
  • eDeliver 7 color shift wrap
  • eDeliver 7 carbon fiber wrap
  • eDeliver 7 camo and patterned wrap

How much vinyl to wrap a Maxus eDeliver 7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowvan (4 doors)196.8 in (4,998 mm) to 211.2 in (5,364 mm)about 90 ft (27.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 102 ft (31 m)

eDeliver 7 wrap cost factors

The eDeliver 7 wrap cost depends on film type, surface area and the extra work the body demands. At 196.8 in (4,998 mm) to 211.2 in (5,364 mm) long and 78.3 in (1,990 mm) tall, it is a large vehicle, so more material and labor are needed. The sliding door tracks and the separate charge port piece add careful cutting time. A patterned or chrome film is measured at about 102 ft (31 m), which raises material use.

  • Film for a full wrap: about 90 ft (27.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 102 ft (31 m).
  • Body: van (4 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • A tall body (78.3 in (1,990 mm)): the roof is wrapped from a platform.

eDeliver 7 wraps by generation

Swipe sideways. Tap a card for the full description.

2025–now eDeliver 7 van (first generation)

2025–nowvan (4 doors)196.8 in (4,998 mm) to 211.2 in (5,364 mm)

The first Maxus eDeliver 7 generation, produced from 2025 onward, has sliding side doors. The tracks remain bare and decide where the film is cut, so the installers align the panel with the track line. This body length is 196.8 in (4,998 mm) to 211.2 in (5,364 mm), depending on the version. A full wrap takes about 90 ft (27.5 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Electric car: the charge port door is wrapped as a small piece of its own.

A tall body (78.3 in (1,990 mm)): the roof is wrapped from a platform.

Film: about 90 ft (27.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 102 ft (31 m).

Roof, hood, chrome delete and PPF on an eDeliver 7

The eDeliver 7 also suits a partial wrap, such as the roof, hood or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF), a clear film, is applied to the front end to guard against stone chips. These smaller jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Maxus eDeliver 7: body, cut-outs and film

The Maxus eDeliver 7 vinyl wrap starts with a tall, long van body. Its length runs from 196.8 in (4,998 mm) to 211.2 in (5,364 mm) and its height is 78.3 in (1,990 mm). This means the roof is applied from a platform and the sides take two installers. The four doors and sliding side door openings define the main film panels.

Key details for eDeliver 7 wrap ideas are the sliding side door tracks and the charge port door. The tracks stay bare, so the film is cut along them and the edges are sealed. The electric charge port door is wrapped as a small piece of its own to allow it to open cleanly. The tall roof also requires a platform during installation.

Anyone checking how much vinyl to wrap an eDeliver 7 only has one generation in the catalog. The first generation runs from 2025 onward and is the only body style. Film amounts are the same across that generation, about 90 ft (27.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 12 ft (3.5 m) for matching sections.

Questions about wrapping a Maxus eDeliver 7

How much vinyl does it take to wrap a Maxus eDeliver 7?

Yes, wrapping a Maxus eDeliver 7 takes about 90 ft (27.5 m) of 60-inch (1.52 m) cast film. This figure covers the full body of the newest generation, which runs from 2025 onward. If you choose chrome or patterned film, the amount rises to about 102 ft (31 m). The estimate assumes one installer with normal waste for a van of this size.

Are the sliding doors of an eDeliver 7 wrapped?

No, the sliding door tracks of an eDeliver 7 are not wrapped. The tracks stay bare, and the film is cut along them. This keeps the doors working correctly and gives a clean edge. The rest of the side panel is wrapped normally.

Can I wrap only the hood or the roof of an eDeliver 7?

Yes, you can wrap only the hood or the roof of an eDeliver 7. These are listed as partial wrap jobs alongside mirror caps. A chrome delete on the window trim and badges is another smaller option. Paint protection film (PPF), a clear film, on the front end is also available.

Is an eDeliver 7 hard to wrap?

Yes, an eDeliver 7 is harder to wrap than a small car because of its size and tall body. The roof is 78.3 in (1,990 mm) high, so it must be done from a platform. The sliding side door tracks need careful cutting, and the charge port door is a separate small piece. These details add time and skill to the job.