Wraps by car

Maxus Euniq 6 wrap

The Maxus Euniq 6 wrap page covers this electric SUV from 2021 to now. A vinyl wrap changes its color or finish without paint. The catalog lists one generation of the Maxus Euniq 6. A full wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film.

1generations19 mof film for a full wrap

Maxus Euniq 6, first generation, factory photo
Maxus Euniq 6, first generation. Factory color shown.

Maxus Euniq 6 wrap colors and ideas

  • Euniq 6 black wrap
  • Euniq 6 white wrap
  • Euniq 6 gray wrap
  • Euniq 6 silver wrap
  • Euniq 6 red wrap
  • Euniq 6 blue wrap
  • Euniq 6 green wrap
  • Euniq 6 yellow wrap
  • Euniq 6 orange wrap
  • Euniq 6 purple wrap
  • Euniq 6 pink wrap
  • Euniq 6 teal wrap
  • Euniq 6 brown wrap
  • Euniq 6 gold wrap
  • Euniq 6 chrome wrap
  • Euniq 6 color shift wrap
  • Euniq 6 carbon fiber wrap
  • Euniq 6 camo and patterned wrap

How much vinyl to wrap a Maxus Euniq 6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)185.8 in (4,720 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Euniq 6 wrap cost factors

Euniq 6 wrap cost depends on the size of the vehicle, the film, and the labor for cut-outs and removal. This SUV is 185.8 in (4,720 mm) long, so it uses about 62 ft (19 m) of 60-inch (1.52 m) cast film. Sensors and cameras in the bumpers add time because the film is cut around each one. A partial job like a hood wrap costs less than a full wrap.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Euniq 6 wraps by generation

Swipe sideways. Tap a card for the full description.

Maxus Euniq 6, first generation, factory photo
Factory color shown

2021–now Euniq 6 SUV (first generation)

2021–nowSUV (5 doors)185.8 in (4,720 mm)

The first generation Maxus Euniq 6 is the only body in this catalog, produced from 2021 to now. Some trims have a panoramic glass roof, and that glass is not wrapped. The roof stays dark whatever the color of the film because vinyl does not go over glass. The film ends at the roof rails on those trims.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on an Euniq 6

A partial wrap on an Euniq 6 covers selected panels like the hood, mirror caps, or roof on cars without the glass panel. Euniq 6 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to protect against stone chips. These smaller jobs change the look without wrapping the whole SUV.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Maxus Euniq 6: body, cut-outs and film

A Maxus Euniq 6 vinyl wrap has to cover a five-door SUV body that is 185.8 in (4,720 mm) long. This is a large vehicle, so installers work panel by panel. The single body style means the film estimate stays the same for every car. You measure the roof, hood, doors, and bumpers before cutting the film.

Euniq 6 wrap ideas include a full color change, a partial wrap, or chrome delete. Every trim has parking sensors in the bumpers, and the film is cut around each sensor. Cameras in the body also need careful cut-outs around each lens. The charge port door is wrapped as a small piece of its own on this electric car.

How much vinyl to wrap an Euniq 6 depends on the film type, not on the year of the car. The first generation has been produced since 2021, so all current cars share the same body. A color change with cast film needs about 62 ft (19 m) of 60-inch (1.52 m) film. Chrome or patterned film requires more, about 72 ft (22 m), because of the pattern direction.

Questions about wrapping a Maxus Euniq 6

How much vinyl does it take to wrap a Maxus Euniq 6?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a Maxus Euniq 6. That figure is for a full color change on the newest body. Chrome or patterned film needs more, about 72 ft (22 m). The estimate assumes normal waste and no extra for the glass roof.

Can the roof of an Euniq 6 be wrapped?

Yes, you can wrap the roof of an Euniq 6 if it does not have the panoramic glass roof. Some trims have a sunroof, and the film is cut around its opening. If the car has the glass roof, that panel is not wrapped and the film ends at the roof rails.

Can I wrap only the hood or the roof of an Euniq 6?

Yes, you can wrap only the hood or the roof of an Euniq 6. A partial wrap can include the hood, mirror caps, or roof on cars without the glass panel. The roof wrap does not cover the panoramic glass roof on some trims. This is a smaller job than a full wrap.

Is an Euniq 6 hard to wrap?

An Euniq 6 is not especially hard to wrap, but it has details that add time. The bumpers have parking sensors, and the film must be cut around each one. Cameras in the body also need precise cut-outs. The size, 185.8 in (4,720 mm) long, means you handle large panels.