Wraps by car

Maxus MIFA 7 wrap

The Maxus MIFA 7 wrap page covers one generation of this electric minivan, built since 2023. A full vinyl wrap of the newest body takes about 72 ft (22 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 84 ft (25.5 m). The MIFA 7 is a five-door van with a tall body measuring 193.2 in (4,907 mm).

1generations22 mof film for a full wrap

Maxus MIFA 7, first generation, factory photo
Maxus MIFA 7, first generation. Factory color shown.

Maxus MIFA 7 wrap colors and ideas

  • MIFA 7 black wrap
  • MIFA 7 white wrap
  • MIFA 7 gray wrap
  • MIFA 7 silver wrap
  • MIFA 7 red wrap
  • MIFA 7 blue wrap
  • MIFA 7 green wrap
  • MIFA 7 yellow wrap
  • MIFA 7 orange wrap
  • MIFA 7 purple wrap
  • MIFA 7 pink wrap
  • MIFA 7 teal wrap
  • MIFA 7 brown wrap
  • MIFA 7 gold wrap
  • MIFA 7 chrome wrap
  • MIFA 7 color shift wrap
  • MIFA 7 carbon fiber wrap
  • MIFA 7 camo and patterned wrap

How much vinyl to wrap a Maxus MIFA 7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowvan (5 doors)193.2 in (4,907 mm)about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m)

MIFA 7 wrap cost factors

The MIFA 7 wrap cost depends on the amount of film and the labor for its body details. A full wrap uses about 72 ft (22 m) of 60-inch film, or about 84 ft (25.5 m) for chrome or patterned film. The sliding doors, sensors, and cameras add work because each needs careful cutting. Installing film on the tall roof also affects the total cost.

  • Film for a full wrap: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • A tall body (69.1 in (1,756 mm)): the roof is wrapped from a platform.

MIFA 7 wraps by generation

Swipe sideways. Tap a card for the full description.

Maxus MIFA 7, first generation, factory photo
Factory color shown

2023–now MIFA 7 van (first generation)

2023–nowvan (5 doors)193.2 in (4,907 mm)

The first generation Maxus MIFA 7 has sliding side doors that shape the wrap work. The door tracks stay bare, so the film is cut along them. This design means the film must follow the track lines for a clean finish. The doors are a key part of planning a wrap on this van.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

A tall body (69.1 in (1,756 mm)): the roof is wrapped from a platform.

Film: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).

Roof, hood, chrome delete and PPF on an MIFA 7

An MIFA 7 chrome delete covers the window trim and badges with black film. A partial wrap can include the roof, hood, or mirror caps. Paint protection film (PPF) is another option, applied as clear film on the front end. These smaller jobs change the look without a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Maxus MIFA 7: body, cut-outs and film

The Maxus MIFA 7 vinyl wrap must handle a minivan body with sliding side doors and a tall roof. The van is 193.2 in (4,907 mm) long and 69.1 in (1,756 mm) tall. Its five-door shape means the two side doors are wide panels that need careful film alignment. Wrapping the roof requires a platform, which adds to the job.

MIFA 7 wrap ideas start with the parts that need extra work. The sliding door tracks stay bare, so the film is cut along them. Every trim has parking sensors in the bumpers and cameras in the body, so each sensor and lens needs a cut-out. The charge port door is wrapped as a small piece of its own.

To know how much vinyl to wrap an MIFA 7, compare the single generation in the catalog. The first generation has been produced from 2023 to the present. The body dimensions remain the same in this period, so the film estimate does not change. A full wrap uses about 72 ft (22 m) of cast film.

Questions about wrapping a Maxus MIFA 7

How much vinyl does it take to wrap a Maxus MIFA 7?

It takes about 72 ft (22 m) of 60-inch (1.52 m) cast film to wrap a Maxus MIFA 7. If you choose chrome or patterned film, expect to use about 84 ft (25.5 m). These figures apply to the newest body, which is the only generation in the catalog.

Are the sliding doors of an MIFA 7 wrapped?

The sliding doors of an MIFA 7 are wrapped, but the tracks stay bare. The film is cut along the door tracks to allow smooth operation. This leaves the track area exposed while the door panels are covered.

Can I wrap only the hood or the roof of an MIFA 7?

Yes, you can wrap only the hood or the roof of an MIFA 7. Partial wrap options for this van include the roof, hood, and mirror caps. A roof wrap involves working from a platform because of the tall body.

Is an MIFA 7 hard to wrap?

The MIFA 7 has several features that add work to a wrap. The tall body means the roof is wrapped from a platform. Every trim has parking sensors and cameras that need cut-outs, and the charge port door is wrapped as a separate piece. The sliding door tracks also require precise cutting.