Wraps by car

Maxus MIFA 9 wrap

The Maxus MIFA 9 wrap page covers the electric van in its one generation, built since 2021. A full vinyl wrap of the newest body takes about 80 ft (24.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film for the same body takes about 92 ft (28 m). The van is 207.5 in (5,270 mm) long with five doors.

1generations24.5 mof film for a full wrap

Maxus MIFA 9, first generation, factory photo
Maxus MIFA 9, first generation. Factory color shown.

Maxus MIFA 9 wrap colors and ideas

  • MIFA 9 black wrap
  • MIFA 9 white wrap
  • MIFA 9 gray wrap
  • MIFA 9 silver wrap
  • MIFA 9 red wrap
  • MIFA 9 blue wrap
  • MIFA 9 green wrap
  • MIFA 9 yellow wrap
  • MIFA 9 orange wrap
  • MIFA 9 purple wrap
  • MIFA 9 pink wrap
  • MIFA 9 teal wrap
  • MIFA 9 brown wrap
  • MIFA 9 gold wrap
  • MIFA 9 chrome wrap
  • MIFA 9 color shift wrap
  • MIFA 9 carbon fiber wrap
  • MIFA 9 camo and patterned wrap

How much vinyl to wrap a Maxus MIFA 9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowvan (5 doors)207.5 in (5,270 mm)about 80 ft (24.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m)

MIFA 9 wrap cost factors

The MIFA 9 wrap cost depends on film coverage, material type, and the van's size. A full wrap of the 207.5 in (5,270 mm) body uses about 80 ft (24.5 m) of cast film, or 92 ft (28 m) for chrome or patterned film. The tall 72.4 in (1,840 mm) body requires a platform for the roof. Cut-outs for sensors, cameras, and the charge port door add labor.

  • Film for a full wrap: about 80 ft (24.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • A tall body (72.4 in (1,840 mm)): the roof is wrapped from a platform.

MIFA 9 wraps by generation

Swipe sideways. Tap a card for the full description.

Maxus MIFA 9, first generation, factory photo
Factory color shown

2021–now MIFA 9 van (first generation)

2021–nowvan (5 doors)207.5 in (5,270 mm)

The first-generation Maxus MIFA 9 has sliding side doors whose tracks stay bare. The film is cut along the tracks, so the wrap cannot cover that area. This design keeps the door mechanism working freely. The track line becomes a key edge for the wrap design.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

A tall body (72.4 in (1,840 mm)): the roof is wrapped from a platform.

Film: about 80 ft (24.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m).

Roof, hood, chrome delete and PPF on an MIFA 9

Partial wraps on the Maxus MIFA 9 include the hood, mirror caps, and roof on cars without the glass panel. MIFA 9 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end. These smaller jobs use less material than a full wrap.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Maxus MIFA 9: body, cut-outs and film

The Maxus MIFA 9 vinyl wrap has a large body that raises material and labor needs. At 207.5 in (5,270 mm) long and 72.4 in (1,840 mm) tall, the van needs more film than a smaller vehicle. The sliding side doors create long body panels with separate door pieces. The tall roof is wrapped from a platform.

MIFA 9 wrap ideas include full color changes, partial accents, and chrome delete. The sliding side door tracks stay bare, and the film is cut along them. Some trims have a panoramic glass roof, so the film ends at the roof rails where the glass begins. Every trim has parking sensors in the bumpers and cameras in the body, with film cut around each sensor and lens. The charge port door is wrapped as a small piece of its own.

How much vinyl to wrap an MIFA 9 depends on the film type and the van's single generation. The 2021–now body uses about 80 ft (24.5 m) of standard cast film. Chrome or patterned film adds about 12 ft (3.6 m) to the estimate. There are no earlier or later generations to compare for film count.

Questions about wrapping a Maxus MIFA 9

How much vinyl does it take to wrap a Maxus MIFA 9?

A full wrap of a Maxus MIFA 9 takes about 80 ft (24.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film on the same body takes about 92 ft (28 m). The van is 207.5 in (5,270 mm) long, so extra material covers the tall roof and large side panels.

Are the sliding doors of an MIFA 9 wrapped?

Yes, the sliding doors of an MIFA 9 are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can slide freely. This leaves a visible line where the wrap ends on each door.

Can the roof of an MIFA 9 be wrapped?

Yes, the roof of an MIFA 9 can be wrapped if it does not have a panoramic glass roof. On some trims, the glass roof is not wrapped, and the film ends at the roof rails. The tall body (72.4 in (1,840 mm)) means the roof is wrapped from a platform.

Can I wrap only the hood or the roof of an MIFA 9?

Yes, you can wrap only the hood or the roof of an MIFA 9. The roof wrap is for cars without the panoramic glass panel. A partial wrap may also include mirror caps, or chrome delete for window trim and badges.