Wraps by car

Scion FR-S wrap

The Scion FR-S wrap page covers one generation, the 2012–2016 coupe. A full wrap of this sports car uses about 46 ft (14 m) of 60-inch (1.52 m) cast vinyl wrap. With chrome or patterned film, plan on about 52 ft (16 m).

1generations14 mof film for a full wrap

Scion FR-S, first generation, factory photo
Scion FR-S, first generation. Factory color shown.

Scion FR-S wrap colors and ideas

  • FR-S black wrap
  • FR-S white wrap
  • FR-S gray wrap
  • FR-S silver wrap
  • FR-S red wrap
  • FR-S blue wrap
  • FR-S green wrap
  • FR-S yellow wrap
  • FR-S orange wrap
  • FR-S purple wrap
  • FR-S pink wrap
  • FR-S teal wrap
  • FR-S brown wrap
  • FR-S gold wrap
  • FR-S chrome wrap
  • FR-S color shift wrap
  • FR-S carbon fiber wrap
  • FR-S camo and patterned wrap

How much vinyl to wrap a Scion FR-S

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2016coupe (2 doors)166.9 in (4,239 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

FR-S wrap cost factors

FR-S wrap cost depends on the film type, the number of panels, and the finish of the paint. The car is 166.9 in (4,239 mm) long, so full coverage uses about 46 ft (14 m) of 60-inch (1.52 m) film. A chrome or patterned film raises the amount to about 52 ft (16 m).

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

FR-S wraps by generation

Swipe sideways. Tap a card for the full description.

Scion FR-S, first generation, factory photo
Factory color shown

2012–2016 FR-S coupe (first generation)

2012–2016coupe (2 doors)166.9 in (4,239 mm)

The first-generation Scion FR-S was produced from 2012 to 2016. On a car of these years, panels may be original or repainted. Always do a test spot before a full wrap to check adhesion and clean removal.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on an FR-S

Partial wrap options for the Scion FR-S include the roof, hood, and mirror caps. For FR-S chrome delete, wrap the window trim and badges with black film. Paint protection film (PPF) works well as a clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Scion FR-S: body, cut-outs and film

A Scion FR-S vinyl wrap must fit a two-door coupe that is 166.9 in (4,239 mm) long. The short body keeps the side sections manageable and reduces waste. However, the curved rear fenders and roof line need careful trimming and stretching.

FR-S wrap ideas often start with the two long side doors. Each door is one large piece of film, so a clean install requires steady hands and a helper. The front bumper, mirrors, and door handles need cut-outs or removal.

When you plan how much vinyl to wrap an FR-S, note this page lists only the first generation. The 2012–2016 model kept the same NZ6 body code throughout production. That makes film estimates consistent for every year in this range.

Questions about wrapping a Scion FR-S

How much vinyl does it take to wrap a Scion FR-S?

A Scion FR-S needs about 46 ft (14 m) of 60-inch (1.52 m) cast vinyl for a full wrap. Chrome or patterned film increases that to about 52 ft (16 m). The estimate covers the whole coupe body of the 2012–2016 generation.

Can I wrap only the hood or the roof of an FR-S?

Yes, you can wrap only the hood or the roof of an FR-S. Partial wraps for this car commonly cover the roof, hood, and mirror caps. These smaller jobs use less film and take less time than a full wrap.

Is an FR-S hard to wrap?

An FR-S is not the hardest car to wrap, but the long doors and curved panels add work. Each door is one large piece of film, which demands careful handling. The 166.9 in (4,239 mm) length also means more surface area than on a subcompact.

How many generations of the FR-S does this page cover?

This page covers one generation of the Scion FR-S, the first generation from 2012 to 2016. The car stayed a two-door coupe with the same NZ6 body code throughout those years.