Wraps by car

Scion xA wrap

The Scion xA wrap covers the subcompact hatchback made from 2004 to 2006 in one generation. This page explains what a vinyl wrap on an xA involves, from film amounts to the parts that need extra work. A full wrap of the xA hatchback takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Scion xA, first generation, factory photo
Scion xA, first generation. Factory color shown.

Scion xA wrap colors and ideas

  • xA black wrap
  • xA white wrap
  • xA gray wrap
  • xA silver wrap
  • xA red wrap
  • xA blue wrap
  • xA green wrap
  • xA yellow wrap
  • xA orange wrap
  • xA purple wrap
  • xA pink wrap
  • xA teal wrap
  • xA brown wrap
  • xA gold wrap
  • xA chrome wrap
  • xA color shift wrap
  • xA carbon fiber wrap
  • xA camo and patterned wrap

How much vinyl to wrap a Scion xA

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2004–2006hatchback (5 doors)154.1 in (3,914 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

xA wrap cost factors

xA wrap cost depends on the size of the car, the film choice, and the condition of the paint. The xA measures 154.1 in (3,914 mm) long, which is a standard subcompact car size. A full wrap uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film takes about 59 ft (18 m). The amount of cut-outs, like the tailgate glass and door handles, also affects the labor.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

xA wraps by generation

Swipe sideways. Tap a card for the full description.

Scion xA, first generation, factory photo
Factory color shown

2004–2006 xA hatchback (first generation)

2004–2006hatchback (5 doors)154.1 in (3,914 mm)

The first generation Scion xA (2004–2006) is the only body style this page covers. Because these cars are from those years, the paint may be original or repainted. A test spot checks how the paint handles the vinyl and adhesive before a full wrap is applied. The wrap film must be worked around the tailgate glass, which is part of the rear hatch.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a xA

A partial wrap on a Scion xA can cover the roof, hood, or mirror caps. An xA chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to shield it from stone chips. These smaller jobs use less film than a full wrap and can change the look without covering the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Scion xA: body, cut-outs and film

A Scion xA vinyl wrap suits the single five-door hatchback body style this car came in. The body is 154.1 in (3,914 mm) long, which is compact but has the same number of large panels as bigger cars. The tall roof and upright sides mean the film is worked over flat areas with sharp creases at the doors and tailgate. The tailgate includes the rear glass, so the vinyl ends at the edge of the glass.

xA wrap ideas work best when you know which parts need cut-outs or removal. The door handles, mirrors, headlights, and taillights are removed or cut around for a clean finish. The tailgate has the rear glass in it, so the film ends at the edge of the glass and does not cover the window. The badges and chrome trim are also removed for a full color change wrap.

How much vinyl to wrap a xA depends on the one generation this page covers, produced from 2004 to 2006. The body did not change shape between those years, so the film estimate stays the same. The hatchback is the only style, so there is no longer or shorter body to alter the count. You need about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap.

Questions about wrapping a Scion xA

How much vinyl does it take to wrap a Scion xA?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a Scion xA fully. This figure is for the newest body, which is the only generation of the xA. The full wrap does not cover the glass, including the rear window that is part of the tailgate.

Can I wrap only the hood or the roof of a xA?

Yes, you can wrap only the hood or the roof of a xA. A partial wrap can cover just the roof, hood, or mirror caps. These areas are flat and simple, so they use less film than a full wrap.

Is a xA hard to wrap?

Yes, a xA is a little harder to wrap than some cars because of its tailgate design. The rear glass is set into the tailgate, so the film must end at the edge of the glass and be cut precisely there. The car is 154.1 in (3,914 mm) long, which means more film and more seams than on a smaller car. The door handles and lights also need cut-outs.

How many generations of the xA does this page cover?

This page covers one generation of the Scion xA, produced from 2004 to 2006. The xA had a single body style in those years, a five-door hatchback.