Wraps by car

Scion iQ wrap

The Scion iQ wrap page covers the single-generation 2011–2016 hatchback and the vinyl wrap it takes. A full wrap of the newest body uses about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 48 ft (14.5 m). The page includes the exterior size, the film estimate, and the wrap details that matter to an installer.

1generations12.5 mof film for a full wrap

Scion iQ, first generation, factory photo
Scion iQ, first generation. Factory color shown.

Scion iQ wrap colors and ideas

  • iQ black wrap
  • iQ white wrap
  • iQ gray wrap
  • iQ silver wrap
  • iQ red wrap
  • iQ blue wrap
  • iQ green wrap
  • iQ yellow wrap
  • iQ orange wrap
  • iQ purple wrap
  • iQ pink wrap
  • iQ teal wrap
  • iQ brown wrap
  • iQ gold wrap
  • iQ chrome wrap
  • iQ color shift wrap
  • iQ carbon fiber wrap
  • iQ camo and patterned wrap

How much vinyl to wrap a Scion iQ

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2016hatchback (3 doors)117.5 in (2,985 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

iQ wrap cost factors

Scion iQ wrap cost depends on the film width, the small body size, and the number of cut-outs. The car is 117.5 in (2,985 mm) long, so a full wrap uses about 41 ft (12.5 m) of 60-inch (1.52 m) film. Chrome or patterned film raises the amount to about 48 ft (14.5 m). Paint condition on a car of these years also affects how much surface preparation the wrap needs.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

iQ wraps by generation

Swipe sideways. Tap a card for the full description.

Scion iQ, first generation, factory photo
Factory color shown

2011–2016 iQ hatchback (first generation)

2011–2016hatchback (3 doors)117.5 in (2,985 mm)

The first-generation Scion iQ from 2011 to 2016 has one hatchback body with three doors. Paint age matters on a car of these years: panels may be original or repainted, so a test spot comes before a full wrap. The body code NGJ10 stays the same through the production run. A wrap installer checks the paint on every panel before the full wrap begins.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on an iQ

A partial wrap on the Scion iQ covers the roof, hood, or mirror caps. Chrome delete turns the window trim and badges black with film. Paint protection film (PPF) is clear film placed on the front end of this 117.5 in (2,985 mm) hatchback. The two long side doors can be left unwrapped for a two-tone look.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Scion iQ: body, cut-outs and film

A Scion iQ vinyl wrap follows the shape of a 117.5 in (2,985 mm) three-door hatchback. The short body and two long side doors keep the number of panels small. Each door is one large piece of film. The tailgate includes the rear glass, so the film ends at the edge of the glass.

iQ wrap ideas often start with the two long side doors, which become one large piece of film each. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Plug-in and electric versions have a charge port door wrapped as a small piece of its own. Removing mirrors, door handles, and trim before wrapping gives cleaner edges.

When you count how much vinyl to wrap an iQ, there is only one generation from 2011 to 2016. The body code NGJ10 and the hatchback style stay the same across all production years. The film estimate of about 41 ft (12.5 m) of 60-inch (1.52 m) cast film holds for every year. No extra allowance for a different body style is needed.

Questions about wrapping a Scion iQ

How much vinyl does it take to wrap a Scion iQ?

A Scion iQ takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film for a full wrap. The estimate comes from the newest body, the 2011–2016 hatchback. Chrome or patterned film needs about 48 ft (14.5 m). The short 117.5 in (2,985 mm) body keeps the material use low.

Can I wrap only the hood or the roof of an iQ?

Yes, you can wrap only the hood or the roof of an iQ as a partial wrap. The partial jobs for this car are the roof, hood, and mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film is clear film on the front end.

Is an iQ hard to wrap?

The Scion iQ has two long side doors, each wrapped as one large piece of film. The tailgate includes the rear glass, so the film ends at the edge of the glass. Plug-in and electric versions have a charge port door wrapped as a small piece of its own. The small 117.5 in (2,985 mm) body reduces the total panel count, but the large door pieces and the glass tailgate add work.

How many generations of the iQ does this page cover?

The Scion iQ has one generation in this catalog, the 2011–2016 hatchback. The page covers a single generation, so every production year uses the same body style and film estimate.