Wraps by car

Scion xB wrap

The Scion xB wrap page covers the two generations of the boxy five-door van. A full wrap of the newest second-generation body takes about 62 ft (19 m) of 60-inch (1.52 m) cast vinyl wrap. The first generation is smaller and needs less film.

2generations19 mof film for a full wrap

Scion xB, second generation, factory photo
Scion xB, second generation. Factory color shown.

Scion xB wrap colors and ideas

  • xB black wrap
  • xB white wrap
  • xB gray wrap
  • xB silver wrap
  • xB red wrap
  • xB blue wrap
  • xB green wrap
  • xB yellow wrap
  • xB orange wrap
  • xB purple wrap
  • xB pink wrap
  • xB teal wrap
  • xB brown wrap
  • xB gold wrap
  • xB chrome wrap
  • xB color shift wrap
  • xB carbon fiber wrap
  • xB camo and patterned wrap

How much vinyl to wrap a Scion xB

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2015van (5 doors)167.3 in (4,249 mm) to 167.3 in (4,250 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
2003–2006van (5 doors)155.3 in (3,945 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

xB wrap cost factors

The xB wrap cost depends on the generation, the film type and the amount of labor. The first generation is smaller and needs less film, while the second generation has more surface area. Surface preparation and removal of parts like mirrors and door handles also affect the quote.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Restyled in 2010: bumpers and lights differ between the versions, and so do the film cuts.

xB wraps by generation

Swipe sideways. Tap a card for the full description.

Scion xB, second generation, factory photo
Factory color shown

2007–2015 xB van (second generation)

2007–2015van (5 doors)167.3 in (4,249 mm) to 167.3 in (4,250 mm)

The second-generation Scion xB, made from 2007 to 2015, has sliding side doors with channels that stay bare. The film is cut along these tracks, so every panel edge follows the body line. A restyle in 2010 changed the front and rear fascias but not the basic door layout.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Scion xB, first generation, factory photo
Factory color shown

2003–2006 xB van (first generation)

2003–2006van (5 doors)155.3 in (3,945 mm)

The first-generation Scion xB, made from 2003 to 2006, often has aging paint that needs a test spot before wrapping. Panels may be original or repainted, and the film may not bond to failing clear coat. A professional installer checks each panel and advises on preparation.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a xB

A partial wrap on a Scion xB can cover just the roof, hood or mirror caps for a contrasting look. An xB chrome delete covers the window trim and badges with black film. Clear paint protection film (PPF) on the front end guards against stone chips without changing the color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Scion xB: body, cut-outs and film

A Scion xB vinyl wrap must follow the tall, flat sides and the sliding door tracks of this van. The second generation is 167.3 in (4,249 mm) long, and the first generation is 155.3 in (3,945 mm) long. A full wrap uses large panels on the doors and quarter panels, with extra film for the bumpers.

xB wrap ideas start with the factory look or a full color change in gloss, matte or satin. The sliding side doors have tracks that stay bare, and the film is cut along them. Door handles, mirrors and badges need cut-outs or removal for a clean install.

To know how much vinyl to wrap a xB, measure the body style and note the generation. The second generation (2007–2015) needs about 62 ft (19 m), while the first generation (2003–2006) needs about 59 ft (18 m). A color change with chrome or patterned film takes about 10 to 12 ft (3 to 4 m) more.

Questions about wrapping a Scion xB

How much vinyl does it take to wrap a Scion xB?

A full wrap of a Scion xB takes about 62 ft (19 m) of 60-inch (1.52 m) cast vinyl film for the newest body. The first generation needs about 59 ft (18 m), and patterned or chrome film adds about 10 ft (3 m). A professional installer measures the exact vehicle before ordering.

Are the sliding doors of a xB wrapped?

Yes, the sliding doors of a Scion xB are wrapped, but the door tracks stay bare. The film is cut along the channels so the doors can open and close without rubbing. The installer trims cleanly around the track edges for a factory look.

Which years of the xB take the same film cuts?

Each generation of the Scion xB has its own film cuts, with a change within the second generation in 2010. The first generation (2003–2006) and the second generation (2007–2015) are different bodies. A 2007–2009 xB and a 2010–2015 xB may need different patterns for the front and rear bumpers.

Can I wrap only the hood or the roof of a xB?

Yes, you can wrap only the hood or the roof of a Scion xB as a partial wrap. Mirror caps, roof, hood and chrome delete are popular smaller jobs. Paint protection film on the front end is another option for partial coverage.