Matte and satin brown films for the Ractis give a soft, non-reflective finish that hides fingerprints and shallow factory paint marks. KPMF Matt Cappuccino VWS Airelease liner K89082 has a warm beige-brown tone in matte. HEXIS HX20MMAM has a deeper matte brown that suits the Ractis hatchback body. A satin finish in the same group has a slight sheen that reads as more formal than matte.
Gloss brown films for the Ractis bring a deep, polished look that reflects light and shows the body lines clearly. Arlon Gloss Sand Brown 410 is a light warm brown with a very smooth gloss finish. KPMF Cappuccino Gloss VWS Airelease liner K88082 gives a coffee-toned gloss that matches the Ractis minivan shape. Gloss shows water spots and dust more than matte and satin brown.
Metallic and pearl brown films for the Ractis add fine metal flake or a pearl shimmer that changes with the viewing angle. VViViD ULTRA-GLOSS® Caviar Brown Metallic VVULTRGL-CAVIARBRWNMETAL has a dark brown metallic finish with a high-gloss clear top. Tinybot Metal Paint Chocolate 3071 gives a bright metallic brown that stands out on the Ractis. A pearl brown film in this group shows a soft glow in sunlight.
Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.
Years
Body
Length
Film to order
2010–2016
hatchback (5 doors)
157.3 in (3,995 mm)
about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
2005–2010
hatchback (5 doors)
155.7 in (3,955 mm)
about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
Brown Ractis wraps by generation
Swipe sideways. Tap a card for the full description.
Factory color shown
2010–2016 Ractis (second generation): satin brown
2010–2016hatchback (5 doors)157.3 in (3,995 mm)
A second generation Toyota Ractis from 2010–2016 can have panels that are original or repainted, so a test spot checks how well the wrap adheres before the full job. The P120 hatchback has a tailgate with the rear glass in it, which means the film ends at the edge of the glass. A wrapped Ractis of these years may need more surface preparation on older paint.
Satin brown on this body of the Toyota Ractis gives a smooth, low-gloss finish that suits the second generation hatchback shape. The vinyl wrap follows the rear window edge cleanly because the tailgate glass is surrounded by a clear body panel. Satin brown film reads as a muted color that hides small scratches better than gloss.
Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
Factory color shown
2005–2010 Ractis (first generation): matte brown
2005–2010hatchback (5 doors)155.7 in (3,955 mm)
The first generation Toyota Ractis is 155.7 in (3,955 mm) long, and its five-door hatchback body needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap. The wrap covers 10 to 12 panels on this body, including five doors, two bumpers, fenders, hood and roof. A Ractis wrapped matte brown in this shape uses film efficiently because the tailgate has the rear glass in it.
Matte brown on this body of the Toyota Ractis works well with the first generation high-roof design, giving a flat, calm color without glare. The wrap design can be a full color change or a two-tone look by leaving the roof in factory paint. Matte brown film on the P100 hatchback shows the simple body lines clearly.
Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
Partial brown wrap, chrome delete and PPF on a Ractis
Brown partial wrap for the Ractis
A partial wrap in brown on the Toyota Ractis covers a roof, a hood or both mirror caps, and it changes the car's look without wrapping every panel. The film for one roof is about 4 m (13 ft) and for one hood about 2.5 m (8 ft) of 60-inch (1.52 m) material. Partial wrap pieces on a Ractis can match or contrast with the factory paint.
Ractis chrome delete
A chrome delete on the Ractis replaces the bright window trim and badges with gloss or satin black film next to a body in brown. The blackout film cuts to fit each trim piece and badge without removing them from the car. Chrome delete can be done with the same wrap job or as a separate blackout service.
Paint protection film on a Ractis
Paint protection film (PPF) on the Ractis is a clear layer over the front bumper, hood, fenders and mirror caps that guards against stone chips and light scratches. PPF can also be laid over a brown wrap to keep the color film from damage on the leading edges. A matte version of PPF keeps the soft look of a matte brown Ractis.
Wrapping a Toyota Ractis in brown: film, fit and upkeep
A Toyota Ractis wrapped in brown starts with a color change decision between a solid brown and a finish that shifts in the light.
Factory paint on the Ractis is hidden by the wrap, and careful installation keeps seams tight around the tailgate and doors.
The wrap is removable without changing the paint underneath when it is applied and removed correctly, and hand wash care keeps the brown film clean.
How much does it cost to wrap a Toyota Ractis in brown?
The cost to wrap a Toyota Ractis in brown depends on the amount of film needed, which film line and finish you choose, the labor time, paint preparation and whether you wrap the door jambs. A full wrap of the Ractis takes about 51 ft (15.5 m) of film, and a shop quotes a number after seeing the car. The color of the film does not change the price by itself, but the film brand and finish do.
Can a leased Ractis be wrapped?
Yes, a leased Ractis can be wrapped when the wrap is removed before the lease return and the paint underneath is undamaged. The wrap protects the paint in most cases, but any paint damage already on the car may be more visible under film. A shop that does many lease returns can guide you on the removal timing.
Will removing a brown wrap damage the factory paint?
Removing a brown wrap from a Ractis does not damage the factory paint when the film is installed correctly and the paint is in good condition. Old or weak paint can pull away with the film, especially on a repainted panel. Professional removal with low heat and correct technique gives the best result.
How do I choose a wrap shop for the Ractis?
A good wrap shop for the Ractis has installers who work on small hatchbacks and know how to handle tight panel gaps and glass in the tailgate. Look at the shop's previous work on vehicles like the Ractis and ask about the brand of film they use. A shop that prepares the paint well and explains film care is a good sign.
Does a brown wrap show dirt, heat or fading more than other colors?
A brown wrap on the Ractis shows dust and water spots more than a silver or white car and less than black, and the surface gets warmer under sun than a light color. Satin and matte brown hide fingerprints and shallow dirt better than gloss. The color does not change the film's basic care, but a dark brown surface heats up more quickly.