Wraps by car

Toyota Ractis wrap

This page covers the Toyota Ractis wrap in its two generations. The Toyota Ractis is a small minivan sold as a five-door hatchback. Its bodies measure 155.7 in and 157.3 in, depending on generation. A vinyl wrap of the newest body takes about 51 ft of 60-inch film.

2generations15.5 mof film for a full wrap

Toyota Ractis, second generation, factory photo
Toyota Ractis, second generation. Factory color shown.

Toyota Ractis wrap colors and ideas

  • Ractis black wrap
  • Ractis white wrap
  • Ractis gray wrap
  • Ractis silver wrap
  • Ractis red wrap
  • Ractis blue wrap
  • Ractis green wrap
  • Ractis yellow wrap
  • Ractis orange wrap
  • Ractis purple wrap
  • Ractis pink wrap
  • Ractis teal wrap
  • Ractis brown wrap
  • Ractis gold wrap
  • Ractis chrome wrap
  • Ractis color shift wrap
  • Ractis carbon fiber wrap
  • Ractis camo and patterned wrap

How much vinyl to wrap a Toyota Ractis

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2016hatchback (5 doors)157.3 in (3,995 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
2005–2010hatchback (5 doors)155.7 in (3,955 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Ractis wrap cost factors

Ractis wrap cost depends on film type, finish, and the amount of material the body needs. A solid color wrap of the second generation uses about 51 ft of cast film. A chrome or patterned film adds about 10 ft for the same car. The number of cut-outs and removed parts also affects the labor.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Ractis wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Ractis, second generation, factory photo
Factory color shown

2010–2016 Ractis hatchback (second generation)

2010–2016hatchback (5 doors)157.3 in (3,995 mm)

The second-generation Toyota Ractis was built from 2010 to 2016. On a car of these years panels may be original or repainted. A test spot comes before a full wrap to check paint condition. Its body is 157.3 in long and takes about 51 ft of solid color film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Toyota Ractis, first generation, factory photo
Factory color shown

2005–2010 Ractis hatchback (first generation)

2005–2010hatchback (5 doors)155.7 in (3,955 mm)

The first-generation Toyota Ractis was produced from 2005 to 2010. Its hatchback body is 155.7 in long, with five doors and a small tailgate. The smaller size means slightly less film than the second generation. A chrome or patterned film for this body takes about 59 ft.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Ractis

A partial wrap of the Toyota Ractis covers the roof, hood, and mirror caps. A Ractis chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is applied as clear film on the front end. These jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Ractis: body, cut-outs and film

A Toyota Ractis vinyl wrap covers a compact, upright body with four side doors and a tailgate. The five-door hatchback shape keeps the wrap area modest for a minivan. The 2010–2016 body is 157.3 in long and needs about 51 ft of film. The first generation is slightly shorter at 155.7 in with a similar panel count.

Ractis wrap ideas start with the tailgate, where the rear glass sits in the metal panel. The film is cut to end at the edge of the glass, so no trim removal is needed there. Door handles, mirror caps, and badges are removed for a clean wrap. The front bumper has several recesses that need relief cuts and heat.

To know how much vinyl to wrap a Ractis, compare the two generations. The 2010–2016 body takes about 51 ft of 60-inch cast film in a solid color. A chrome or patterned film on the same car needs about 61 ft for pattern matching. The 2005–2010 body is slightly smaller and takes about 59 ft of patterned film.

Questions about wrapping a Toyota Ractis

How much vinyl does it take to wrap a Toyota Ractis?

Yes, a full wrap of a Toyota Ractis takes about 51 ft of 60-inch vinyl film. That figure is for the 2010–2016 hatchback body with solid color cast film. A chrome or patterned film needs about 61 ft for the same car. The first generation is slightly smaller and may use a little less.

Can I wrap only the hood or the roof of a Ractis?

Yes, you can wrap only the hood or the roof of a Ractis. A partial wrap often includes the roof, hood, and mirror caps as separate pieces. The hood has a central bulge on the second generation that is wrapped as one panel. The roof has no antenna cut-out on the first generation.

Is a Ractis hard to wrap?

A Ractis is not hard to wrap, but the tailgate adds one extra step. The rear glass is set into the tailgate, so the film is cut to end at the glass edge. The front bumper has several recesses that need careful relief cuts and heating. Its compact size keeps the job manageable.

How many generations of the Ractis does this page cover?

This page covers two generations of the Toyota Ractis. The first generation was produced from 2005 to 2010, and the second from 2010 to 2016. Only the second generation is currently in the catalog for this page's full details. Both are five-door hatchback minivans.