Wraps by car

Trabant 11 wrap

The Trabant 11 wrap page covers the 1990–1991 first generation in convertible, pickup, sedan, and wagon styles. A full wrap of the newest body takes about 36 ft (11 m) of 60-inch (1.52 m) cast film for the convertible up to 44 ft (13.5 m) for the wagon. The Trabant 11 is a subcompact with a body length of 137.0 in (3,480 mm) to 140.2 in (3,560 mm).

1generations11 mof film for a full wrap

Trabant 11, first generation, factory photo
Trabant 11, first generation. Factory color shown.

Trabant 11 wrap colors and ideas

  • Trabant 11 black wrap
  • Trabant 11 white wrap
  • Trabant 11 gray wrap
  • Trabant 11 silver wrap
  • Trabant 11 red wrap
  • Trabant 11 blue wrap
  • Trabant 11 green wrap
  • Trabant 11 yellow wrap
  • Trabant 11 orange wrap
  • Trabant 11 purple wrap
  • Trabant 11 pink wrap
  • Trabant 11 teal wrap
  • Trabant 11 brown wrap
  • Trabant 11 gold wrap
  • Trabant 11 chrome wrap
  • Trabant 11 color shift wrap
  • Trabant 11 carbon fiber wrap
  • Trabant 11 camo and patterned wrap

How much vinyl to wrap a Trabant 11

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–1991convertible, pickup, sedan, wagon (2 or 3 doors)137.0 in (3,480 mm) to 140.2 in (3,560 mm)about 36 ft (11 m) for the convertible to 44 ft (13.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m)

Trabant 11 wrap cost factors

The Trabant 11 wrap cost depends on the body style, the film type, and the labor. A convertible takes less film than a wagon, while chrome or patterned film takes more than a standard color change wrap. The amount of disassembly and cut-outs also affects the total. The condition of the paint and any body damage are the main other factors.

  • Film for a full wrap: about 36 ft (11 m) for the convertible to 44 ft (13.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).
  • Body: convertible, pickup, sedan, wagon (2 or 3 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Trabant 11 wraps by generation

Swipe sideways. Tap a card for the full description.

Trabant 11, first generation, factory photo
Factory color shown

1990–1991 Trabant 11 convertible, pickup, sedan, wagon (first generation)

1990–1991convertible, pickup, sedan, wagon (2 or 3 doors)137.0 in (3,480 mm) to 140.2 in (3,560 mm)

The open top on the first generation Trabant 11 is handled by body style. A fabric top is not wrapped and the film ends where the top begins. A folding hard top is wrapped as its own separate panels. This keeps the film lines clean around the convertible opening.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Film: about 36 ft (11 m) for the convertible to 44 ft (13.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Trabant 11

A partial wrap on the Trabant 11 can cover the roof, hood, or mirror caps. Chrome delete covers bright trim such as window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end. These jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Trabant 11: body, cut-outs and film

The Trabant 11 vinyl wrap is shaped by the small body styles and sizes. A subcompact body means the film is applied over tight curves and short panels. The wagon has the largest surface area and the convertible the smallest in this range. The 2- and 3-door layouts affect how the film runs along the sides.

Trabant 11 wrap ideas include planning for cut-outs and removed parts. On a convertible body, the fabric top is not wrapped and the film ends where it begins. A tailgate with the rear glass in it means the film ends at the edge of the glass. A pickup bed is treated as a separate body and the inside of the bed is not wrapped.

How much vinyl to wrap a Trabant 11 depends on the body style and the film type. The first generation was produced from 1990 to 1991 only. For a full wrap, the convertible needs about 36 ft (11 m) and the wagon about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film can take up to about 56 ft (17 m).

Questions about wrapping a Trabant 11

How much vinyl does it take to wrap a Trabant 11?

It takes about 36 ft (11 m) for the convertible to 44 ft (13.5 m) for the wagon using 60-inch (1.52 m) cast film. Chrome or patterned film can take up to about 56 ft (17 m).

Is the top of a Trabant 11 wrapped?

No, a fabric top is not wrapped and the film ends where it begins. A folding hard top is wrapped as its own panels.

Is the bed of a Trabant 11 wrapped?

No, the inside of the bed is not wrapped. The cab and the bed are wrapped as two separate bodies.

Which Trabant 11 body takes more film?

The wagon takes more film, about 44 ft (13.5 m) compared to 36 ft (11 m) for the convertible.