Wraps by car

Trabant P 601 wrap

A Trabant P 601 wrap covers the classic two-stroke subcompact built from 1963 to 1990. The catalog lists one generation with convertible, sedan, and wagon bodies. A full wrap of the newest body takes about 36 ft (11 m) for the convertible to 44 ft (13.5 m) for the wagon.

1generations11 mof film for a full wrap

Trabant P 601, first generation, factory photo
Trabant P 601, first generation. Factory color shown.

Trabant P 601 wrap colors and ideas

  • Trabant P 601 black wrap
  • Trabant P 601 white wrap
  • Trabant P 601 gray wrap
  • Trabant P 601 silver wrap
  • Trabant P 601 red wrap
  • Trabant P 601 blue wrap
  • Trabant P 601 green wrap
  • Trabant P 601 yellow wrap
  • Trabant P 601 orange wrap
  • Trabant P 601 purple wrap
  • Trabant P 601 pink wrap
  • Trabant P 601 teal wrap
  • Trabant P 601 brown wrap
  • Trabant P 601 gold wrap
  • Trabant P 601 chrome wrap
  • Trabant P 601 color shift wrap
  • Trabant P 601 carbon fiber wrap
  • Trabant P 601 camo and patterned wrap

How much vinyl to wrap a Trabant P 601

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1963–1990convertible, sedan, wagon (2 or 3 doors)137.0 in (3,480 mm) to 140.2 in (3,560 mm)about 36 ft (11 m) for the convertible to 44 ft (13.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m)

Trabant P 601 wrap cost factors

Trabant P 601 wrap cost depends on the body style, the film chosen, and the amount of preparation work. A convertible uses less film than a wagon, so its material cost is lower. The condition of the old paint and any rust repair add preparation time. Installers also charge more when many trim pieces must be removed and reinstalled.

  • Film for a full wrap: about 36 ft (11 m) for the convertible to 44 ft (13.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).
  • Body: convertible, sedan, wagon (2 or 3 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Trabant P 601 wraps by generation

Swipe sideways. Tap a card for the full description.

Trabant P 601, first generation, factory photo
Factory color shown

1963–1990 Trabant P 601 convertible, sedan, wagon (first generation)

1963–1990convertible, sedan, wagon (2 or 3 doors)137.0 in (3,480 mm) to 140.2 in (3,560 mm)

The first generation Trabant P 601 includes an open top on the convertible body. In a wrap, the fabric top is left uncovered and the vinyl film ends where the top begins. A folding hard top is treated as its own set of panels and wrapped separately. This keeps the film from lifting at the edges of the top.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 36 ft (11 m) for the convertible to 44 ft (13.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Trabant P 601

A partial wrap on a Trabant P 601 can cover the roof, hood, or mirror caps. Chrome delete replaces bright window trim and badges with black film. Paint protection film (PPF) can be applied to the front end as a clear shield. These smaller jobs use less film than a color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Trabant P 601: body, cut-outs and film

A Trabant P 601 vinyl wrap has to deal with a car that is very small by modern standards. The body length runs from 137.0 in (3,480 mm) to 140.2 in (3,560 mm), so film use stays moderate. The wagon needs the most film because of its taller rear end and larger panels. The convertible needs the least because the fabric top is left uncovered.

Trabant P 601 wrap ideas must account for a few unusual details on this car. On a convertible, the fabric top is not wrapped and the film ends where the top begins. If the car has a folding hard top, that top is wrapped as separate panels. A tailgate with the rear glass in it means the film stops at the edge of the glass.

How much vinyl to wrap a Trabant P 601 depends on the body style you have. The convertible is the shortest and uses about 36 ft (11 m) of 60-inch (1.52 m) cast film. The sedan sits in the middle and needs a bit more film than the convertible. The wagon is the longest and takes up to about 44 ft (13.5 m) of the same film.

Questions about wrapping a Trabant P 601

How much vinyl does it take to wrap a Trabant P 601?

A Trabant P 601 takes about 36 ft (11 m) of vinyl for the convertible and up to 44 ft (13.5 m) for the wagon. The estimate assumes 60-inch (1.52 m) cast film. A sedan falls between those two figures.

Is the top of a Trabant P 601 wrapped?

No, the fabric top of a Trabant P 601 is not wrapped. The vinyl film ends where the fabric top begins. Only the painted body panels are covered.

Which Trabant P 601 body takes more film?

The wagon body takes more film than the convertible or sedan. It needs up to about 44 ft (13.5 m), while the convertible uses about 36 ft (11 m). The wagon's larger rear panels account for the difference.

Can I wrap only the hood or the roof of a Trabant P 601?

Yes, you can wrap only the hood or the roof of a Trabant P 601. These are common partial wrap jobs. The roof and hood use a few square meters of film each.