Wraps by car

Trabant P50 wrap

A Trabant P50 wrap uses vinyl that fits a single generation produced from 1958 to 1962. The newest body takes about 41 ft (12.5 m) for the sedan and 44 ft (13.5 m) for the wagon. All film is 60-inch (1.52 m) wide cast vinyl.

1generations12.5 mof film for a full wrap

Trabant P50, first generation, factory photo
Trabant P50, first generation. Factory color shown.

Trabant P50 wrap colors and ideas

  • Trabant P50 black wrap
  • Trabant P50 white wrap
  • Trabant P50 gray wrap
  • Trabant P50 silver wrap
  • Trabant P50 red wrap
  • Trabant P50 blue wrap
  • Trabant P50 green wrap
  • Trabant P50 yellow wrap
  • Trabant P50 orange wrap
  • Trabant P50 purple wrap
  • Trabant P50 pink wrap
  • Trabant P50 teal wrap
  • Trabant P50 brown wrap
  • Trabant P50 gold wrap
  • Trabant P50 chrome wrap
  • Trabant P50 color shift wrap
  • Trabant P50 carbon fiber wrap
  • Trabant P50 camo and patterned wrap

How much vinyl to wrap a Trabant P50

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1958–1962sedan, wagon (2 or 3 doors)132.3 in (3,361 mm) to 141.7 in (3,600 mm)about 41 ft (12.5 m) for the sedan to 44 ft (13.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)

Trabant P50 wrap cost factors

A Trabant P50 wrap cost depends on the body style and the film area. The sedan needs about 41 ft (12.5 m) of 60-inch (1.52 m) cast vinyl. The wagon needs about 44 ft (13.5 m). Extra cut-outs or trim removal add labor.

  • Film for a full wrap: about 41 ft (12.5 m) for the sedan to 44 ft (13.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: sedan, wagon (2 or 3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Trabant P50 wraps by generation

Swipe sideways. Tap a card for the full description.

Trabant P50, first generation, factory photo
Factory color shown

1958–1962 Trabant P50 sedan, wagon (first generation)

1958–1962sedan, wagon (2 or 3 doors)132.3 in (3,361 mm) to 141.7 in (3,600 mm)

The first generation offers a sedan and a wagon with two or three doors. The style decides the panel plan and the film amount for the wrap. A wagon adds the tailgate with the rear glass set into it.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 41 ft (12.5 m) for the sedan to 44 ft (13.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Trabant P50

A partial wrap on a Trabant P50 covers the roof, hood, or mirror caps. A chrome delete turns the window trim and badges black with vinyl. Paint protection film (PPF) is clear film that guards the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Trabant P50: body, cut-outs and film

Body styles and sizes on the Trabant P50 affect the vinyl wrap work. The sedan and the wagon measure from 132.3 in (3,361 mm) to 141.7 in (3,600 mm) long. A wrapper plans the film by the panels of each style.

The tailgate has the rear glass set into it, so the film ends at the glass edge. Installers cut around the glass to keep the vinyl neat. The tailgate is the main part that needs a cut-out on a Trabant P50.

How much vinyl to wrap a Trabant P50 stays the same across this generation. The film estimate does not change from 1958 to 1962. You count one panel plan for the sedan and one for the wagon.

Questions about wrapping a Trabant P50

How much vinyl does it take to wrap a Trabant P50?

About 41 ft (12.5 m) for the sedan and 44 ft (13.5 m) for the wagon. These figures use 60-inch (1.52 m) cast film for a full Trabant P50 wrap.

Which Trabant P50 body takes more film?

The wagon takes more film than the sedan on a Trabant P50. The wagon needs about 44 ft (13.5 m) while the sedan needs about 41 ft (12.5 m).

Can I wrap only the hood or the roof of a Trabant P50?

Yes, you can wrap only the hood or the roof of a Trabant P50. A partial wrap also covers mirror caps alone. A chrome delete or clear paint protection film is another smaller job.

Is a Trabant P50 hard to wrap?

A Trabant P50 has a tailgate with the rear glass in it, which adds cut-out work. The car is mini-sized, so panels are small and manageable. The main extra step is trimming film at the glass edge on the wagon.