Wraps by car

Trabant 600 wrap

The Trabant 600 wrap page covers full vinyl wrap for the sedan and wagon built from 1962 to 1964. The catalog lists one generation with a subcompact body. A complete color change on the newest body uses about 41 ft (12.5 m) of film for the sedan. The wagon needs roughly 43 ft (13 m) of 60-inch (1.52 m) cast film.

1generations12.5 mof film for a full wrap

Trabant 600, first generation, factory photo
Trabant 600, first generation. Factory color shown.

Trabant 600 wrap colors and ideas

  • Trabant 600 black wrap
  • Trabant 600 white wrap
  • Trabant 600 gray wrap
  • Trabant 600 silver wrap
  • Trabant 600 red wrap
  • Trabant 600 blue wrap
  • Trabant 600 green wrap
  • Trabant 600 yellow wrap
  • Trabant 600 orange wrap
  • Trabant 600 purple wrap
  • Trabant 600 pink wrap
  • Trabant 600 teal wrap
  • Trabant 600 brown wrap
  • Trabant 600 gold wrap
  • Trabant 600 chrome wrap
  • Trabant 600 color shift wrap
  • Trabant 600 carbon fiber wrap
  • Trabant 600 camo and patterned wrap

How much vinyl to wrap a Trabant 600

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1962–1964sedan, wagon (2 or 3 doors)132.3 in (3,360 mm)about 41 ft (12.5 m) for the sedan to 43 ft (13 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m)

Trabant 600 wrap cost factors

Trabant 600 wrap cost scales with the film used and the labor for the body style. The sedan needs about 41 ft (12.5 m) of 60-inch (1.52 m) film, while the wagon calls for about 43 ft (13 m). Detaching the tailgate glass trim and the door parts adds time. The final number changes with the chosen film type and the condition of the old paint.

  • Film for a full wrap: about 41 ft (12.5 m) for the sedan to 43 ft (13 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).
  • Body: sedan, wagon (2 or 3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Trabant 600 wraps by generation

Swipe sideways. Tap a card for the full description.

Trabant 600, first generation, factory photo
Factory color shown

1962–1964 Trabant 600 sedan, wagon (first generation)

1962–1964sedan, wagon (2 or 3 doors)132.3 in (3,360 mm)

The first generation Trabant 600 came as a sedan or a wagon with 2 or 3 doors. The style decides the panel plan and the film amount. The sedan uses about 41 ft (12.5 m) of material, and the wagon takes about 43 ft (13 m). For either body, a wrap shop orders 60-inch (1.52 m) cast film to cover each panel without seams.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 41 ft (12.5 m) for the sedan to 43 ft (13 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Trabant 600

A partial wrap on a Trabant 600 covers the roof, hood, or mirror caps. A chrome delete changes the window trim and badges with black film. Paint protection film (PPF) on the front end keeps a clear layer over the hood and fenders. These smaller jobs let you change one area without committing to a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Trabant 600: body, cut-outs and film

A Trabant 600 vinyl wrap follows the simple, flat panel shape of this small car. The sedan length is 132.3 in (3,360 mm), and the wagon adds only the taller rear section. Both 2-door and 3-door styles suit standard wrap film without special stretching. The straight sides and boxy profile keep the panel plan basic.

Good Trabant 600 wrap ideas treat the tailgate as one piece with the rear glass left open. The film ends at the edge of the glass, so the installer cuts around the window rubber. Door handles, badges, and side mirrors come off for a clean edge. The front grille and bumpers can stay in place if the wrap stops at their trim lines.

How much vinyl to wrap a Trabant 600 depends on the body style. The sedan is the reference at about 41 ft (12.5 m) of 60-inch (1.52 m) film. The wagon adds the taller roof and the larger tailgate for about 43 ft (13 m). A chrome delete with patterned or chrome film can raise the total to about 54 ft (16.5 m). The production years 1962–1964 describe the first generation only.

Questions about wrapping a Trabant 600

How much vinyl does it take to wrap a Trabant 600?

About 41 ft (12.5 m) of 60-inch (1.52 m) cast film wraps a Trabant 600 sedan. The wagon needs about 43 ft (13 m) because of the taller tailgate. This estimate suits one generation, built from 1962 to 1964.

Which Trabant 600 body takes more film?

The Trabant 600 wagon takes more film than the sedan. The sedan estimate is about 41 ft (12.5 m) in 60-inch (1.52 m) width. The wagon estimate is about 43 ft (13 m) with the same film width.

Can I wrap only the hood or the roof of a Trabant 600?

Yes, a partial wrap covers only the hood or the roof and mirror caps if you choose. A chrome delete targets the window trim and badges with black film instead of full panels. Paint protection film (PPF) on the front end is also a standalone job.

Is a Trabant 600 hard to wrap?

A Trabant 600 is straightforward to wrap because of its small size and flat panels. The tailgate has the rear glass set into it, so the film ends at the edge of the glass. Removing the door handles and badges adds some labor. The 132.3 in (3,360 mm) length means each panel is short, which keeps the film easy to align.