Wraps by car

Vauxhall Meriva wrap

A Vauxhall Meriva wrap covers the two generations of this compact minivan, produced from 2003 to 2018. A full vinyl wrap on the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Patterned or chrome film adds roughly 8 ft (2.5 m) to that estimate.

2generations19.5 mof film for a full wrap

Vauxhall Meriva, second generation, factory photo
Vauxhall Meriva, second generation. Factory color shown.

Vauxhall Meriva wrap colors and ideas

  • Meriva black wrap
  • Meriva white wrap
  • Meriva gray wrap
  • Meriva silver wrap
  • Meriva red wrap
  • Meriva blue wrap
  • Meriva green wrap
  • Meriva yellow wrap
  • Meriva orange wrap
  • Meriva purple wrap
  • Meriva pink wrap
  • Meriva teal wrap
  • Meriva brown wrap
  • Meriva gold wrap
  • Meriva chrome wrap
  • Meriva color shift wrap
  • Meriva carbon fiber wrap
  • Meriva camo and patterned wrap

How much vinyl to wrap a Vauxhall Meriva

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2018van (5 doors)168.8 in (4,288 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
2003–2010van (5 doors)159.1 in (4,042 mm) to 159.5 in (4,052 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Meriva wrap cost factors

A Meriva wrap cost is driven by the amount of film, the number of panels, and the chosen finish. The first generation takes about 59 ft (18 m) and the second about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases that to about 69 ft (21 m) on the older body and 72 ft (22 m) on the newer one. The sliding door tracks add cutting time, which also affects the final cost.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Restyled in 2014: bumpers and lights differ between the versions, and so do the film cuts.

Meriva wraps by generation

Swipe sideways. Tap a card for the full description.

Vauxhall Meriva, second generation, factory photo
Factory color shown

2010–2018 Meriva van (second generation)

2010–2018van (5 doors)168.8 in (4,288 mm)

The second-generation Vauxhall Meriva from 2010 to 2018 has sliding side doors that dictate the film cut lines. The tracks stay bare, so each door is wrapped separately and trimmed along the track edges. A restyling in 2014 kept the same body shape, meaning film patterns for the whole generation match.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Vauxhall Meriva, first generation, factory photo
Factory color shown

2003–2010 Meriva van (first generation)

2003–2010van (5 doors)159.1 in (4,042 mm) to 159.5 in (4,052 mm)

The first-generation Vauxhall Meriva from 2003 to 2010 is now old enough that paint condition varies from car to car. Original or repainted panels can behave differently under film, so a test spot is done before a full wrap. The 2006 restyling changed trim and lights, but the panel shapes remained the same for film cutting.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Meriva

A partial wrap on the Vauxhall Meriva covers just the roof, hood, or mirror caps for a smaller color change. Chrome delete, which is bright trim covered with black film, works on the window trim and badges. Paint protection film (PPF) can be applied as clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Vauxhall Meriva: body, cut-outs and film

The Vauxhall Meriva vinyl wrap has to work around a five-door van body that ranges from 159.1 in (4,042 mm) to 168.8 in (4,288 mm) long. That size means a full wrap uses about 59 ft (18 m) of film on the first generation and about 64 ft (19.5 m) on the second. The tall, boxy panels are friendly to installers, but the sliding side doors call for careful cutting around their tracks.

Meriva wrap ideas often start with the largest painted areas: the roof, hood, and sliding side doors. The door tracks stay bare, so the film is cut along them and tucked cleanly at the edges. Badges and door handles are removed for a neat finish, while the front bumper needs relief cuts around fog lights and parking sensors.

How much vinyl to wrap a Meriva depends on which generation you have, because the bodies differ in length by nearly 10 inches. The first generation, from 2003 to 2010, needs about 59 ft (18 m) of 60-inch (1.52 m) cast film. The second generation, from 2010 to 2018, needs about 64 ft (19.5 m) for a full color change wrap.

Questions about wrapping a Vauxhall Meriva

How much vinyl does it take to wrap a Vauxhall Meriva?

A full wrap on a Vauxhall Meriva takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. That figure is for the second generation from 2010 to 2018, the newest body. Chrome or patterned film adds roughly 8 ft (2.5 m), bringing the total to about 72 ft (22 m).

Are the sliding doors of a Meriva wrapped?

Yes, the sliding doors of a Vauxhall Meriva are wrapped, but the tracks stay bare. The film is cut along the tracks and tucked neatly at the edges. This keeps the doors sliding freely and gives a clean line where the paint shows through.

Which years of the Meriva take the same film cuts?

The Vauxhall Meriva from 2010 to 2018 takes the same film cuts, including the restyled 2014 models. The first generation from 2003 to 2010 shares cuts across its production run, and its 2006 restyling did not alter panel shapes. The two generations do not share patterns, because their body lengths differ.

Can I wrap only the hood or the roof of a Meriva?

Yes, you can wrap only the hood or the roof of a Vauxhall Meriva. A partial wrap can cover the roof, hood, or mirror caps as small color change areas. Those jobs require less film than a full wrap and are a way to test a color before committing to the whole van.