Wraps by car

Vauxhall Wyvern wrap

The Vauxhall Wyvern wrap page covers the second generation sedan from 1951 to 1957. A full vinyl wrap of this four-door body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Choosing chrome or patterned film raises the estimate to about 62 ft (19 m). The catalog lists one generation of the Wyvern.

1generations16 mof film for a full wrap

Vauxhall Wyvern, second generation, factory photo
Vauxhall Wyvern, second generation. Factory color shown.

Vauxhall Wyvern wrap colors and ideas

  • Wyvern black wrap
  • Wyvern white wrap
  • Wyvern gray wrap
  • Wyvern silver wrap
  • Wyvern red wrap
  • Wyvern blue wrap
  • Wyvern green wrap
  • Wyvern yellow wrap
  • Wyvern orange wrap
  • Wyvern purple wrap
  • Wyvern pink wrap
  • Wyvern teal wrap
  • Wyvern brown wrap
  • Wyvern gold wrap
  • Wyvern chrome wrap
  • Wyvern color shift wrap
  • Wyvern carbon fiber wrap
  • Wyvern camo and patterned wrap

How much vinyl to wrap a Vauxhall Wyvern

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1951–1957sedan (4 doors)170.7 in (4,337 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Wyvern wrap cost factors

Wyvern wrap cost depends on the 170.7 in (4,337 mm) body length and the amount of film a shop uses. A standard cast film of about 52 ft (16 m) or a chrome film of about 62 ft (19 m) sets the material side. The condition of the 1951–1957 panels changes the preparation work. Removing door handles, badges and window trim adds labor to the quote.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).

Wyvern wraps by generation

Swipe sideways. Tap a card for the full description.

Vauxhall Wyvern, second generation, factory photo
Factory color shown

1951–1957 Wyvern sedan (second generation)

1951–1957sedan (4 doors)170.7 in (4,337 mm)

The second generation Vauxhall Wyvern ran from 1951 to 1957 as a four-door sedan. Paint on a car of these years may be original or repainted, so a test spot comes before a full wrap. Weak or flaking paint must be fixed before film can stick to the 170.7 in (4,337 mm) body. A shop checks each panel before the wrap starts.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Wyvern

A partial wrap on a Vauxhall Wyvern covers the roof, the hood or the mirror caps. A Wyvern chrome delete uses black film on the window trim and the badges. Paint protection film (PPF) is a clear front-end wrap on the hood, fenders and bumper. These smaller jobs leave the rest of the 1951–1957 body untouched.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Vauxhall Wyvern: body, cut-outs and film

A Vauxhall Wyvern vinyl wrap has to follow the sedan's four doors and the 170.7 in (4,337 mm) body length. The separate front and rear fenders and the long hood add seams and joins. Film can be trimmed at the door gaps and at the curved fender edges for a clean finish. The small tail section and the upright roof keep the shape simple to cover.

For Wyvern wrap ideas, the door handles, the side mirrors and the bright trim around the windows need cut-outs or removal. The badges on the hood and the trunk lid come off before the film goes on. The front and rear bumpers stay in place on this body. A chrome delete wrap can cover the window trim and the badges with black film.

To know how much vinyl to wrap a Wyvern, compare the estimate of this 1951–1957 sedan with other cars of the same length. A four-door sedan of 170.7 in (4,337 mm) takes about 52 ft (16 m) of standard cast film. A film with chrome or a pattern needs about 62 ft (19 m). Older bodies often have extra trim that changes the count by a few feet.

Questions about wrapping a Vauxhall Wyvern

How much vinyl does it take to wrap a Vauxhall Wyvern?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a Vauxhall Wyvern. If you pick chrome or patterned film, the estimate is about 62 ft (19 m). These numbers cover the second generation sedan from 1951 to 1957.

Can I wrap only the hood or the roof of a Wyvern?

Yes, you can wrap only the hood or the roof of a Wyvern. A partial wrap on this sedan covers the roof, the hood or the mirror caps. You can also choose a chrome delete for the window trim and badges, or clear paint protection film on the front end.

Is a Wyvern hard to wrap?

A Wyvern is not the hardest car to wrap, but the four doors and the 170.7 in (4,337 mm) length add work. The separate fenders and the long hood need careful trimming and joining. You must remove the door handles, mirrors and badges before the film goes on. The 1951–1957 body often has old paint that needs a test spot first.

How many generations of the Wyvern does this page cover?

This page covers one generation of the Vauxhall Wyvern, the second generation from 1951 to 1957. That sedan is the only body in the catalog for this model.