Wraps by car

Vauxhall Victor wrap

The Vauxhall Victor wrap guide covers two generations of this classic mid-size car. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) for the sedan and 54 ft (16.5 m) for the wagon using 60-inch (1.52 m) cast film. The page shows which parts need cut-outs and what changes between the generations.

2generations16.5 mof film for a full wrap

Vauxhall Victor, fifth generation, factory photo
Vauxhall Victor, fifth generation. Factory color shown.

Vauxhall Victor wrap colors and ideas

  • Victor black wrap
  • Victor white wrap
  • Victor gray wrap
  • Victor silver wrap
  • Victor red wrap
  • Victor blue wrap
  • Victor green wrap
  • Victor yellow wrap
  • Victor orange wrap
  • Victor purple wrap
  • Victor pink wrap
  • Victor teal wrap
  • Victor brown wrap
  • Victor gold wrap
  • Victor chrome wrap
  • Victor color shift wrap
  • Victor carbon fiber wrap
  • Victor camo and patterned wrap

How much vinyl to wrap a Vauxhall Victor

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1972–1978sedan, wagon (4 or 5 doors)179.0 in (4,547 mm)about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)
1967–1972sedan, wagon (5 doors)176.7 in (4,489 mm)about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

Victor wrap cost factors

Victor wrap cost depends on the body style, the amount of film, and the labour for cut-outs. A full wrap uses about 51 ft (15.5 m) for the sedan and 54 ft (16.5 m) for the wagon in 60-inch (1.52 m) cast film. The number of panels and the tailgate glass add time for trimming. A chrome delete or partial wrap costs less than a full color change wrap.

  • Film for a full wrap: about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Victor wraps by generation

Swipe sideways. Tap a card for the full description.

Vauxhall Victor, fifth generation, factory photo
Factory color shown

1972–1978 Victor sedan, wagon (fifth generation)

1972–1978sedan, wagon (4 or 5 doors)179.0 in (4,547 mm)

The fifth-generation Vauxhall Victor came as a sedan or wagon, and the style decides the panel plan and the film amount. The wagon needs about 3 ft more film than the sedan because of the larger roof and the tailgate. A full wrap of this generation uses about 51 ft (15.5 m) for the sedan and 54 ft (16.5 m) for the wagon.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Vauxhall Victor, fourth generation, factory photo
Factory color shown

1967–1972 Victor sedan, wagon (fourth generation)

1967–1972sedan, wagon (5 doors)176.7 in (4,489 mm)

The fourth-generation Vauxhall Victor may have original or repainted panels because of its age, so a test spot comes before a full wrap. A vinyl wrap sticks differently to fresh paint, faded clear coat, or old touch-ups. Check the surface on each panel before ordering film. This step avoids lifting or adhesive marks later.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Victor

A partial wrap on a Vauxhall Victor can cover the roof, hood, or mirror caps instead of the whole car. A Victor chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) in clear film on the front end protects the paint without changing the color. These smaller jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Vauxhall Victor: body, cut-outs and film

A Vauxhall Victor vinyl wrap depends on body style, with the sedan and wagon shapes changing the panel plan. The fifth generation sedan is 179.0 in (4,547 mm) long and the wagon tailgate has the rear glass in it. The fourth generation is slightly shorter at 176.7 in (4,489 mm). These sizes mean a wrap uses similar film for both generations, but the wagon adds about 3 ft of film.

Victor wrap ideas start with the tailgate, where the film ends at the edge of the glass because the rear window is set into the panel. The door handles, mirrors, and badges need cut-outs or removal for a clean finish. A chrome delete covers the bright window trim and badges with black film. Paint protection film (PPF) on the front end is a separate option.

To know how much vinyl to wrap a Victor, count the differences between the fourth and fifth generations. Both generations offer a sedan and wagon, but the fifth generation adds a 4-door wagon option. The film estimate is the same for both generations, from about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon. A chrome or patterned film uses up to about 69 ft (21 m).

Questions about wrapping a Vauxhall Victor

How much vinyl does it take to wrap a Vauxhall Victor?

A Vauxhall Victor takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full sedan wrap and 54 ft (16.5 m) for the wagon. This is the film estimate for the newest body, the fifth generation. A chrome or patterned film uses up to about 69 ft (21 m). The amount includes enough film for the larger panels and some offcuts.

Which Victor body takes more film?

The wagon body takes more film than the sedan for a Vauxhall Victor. A full wagon wrap uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while the sedan uses about 51 ft (15.5 m). The extra film goes to the longer roof and the tailgate, which has the rear glass in it.

Can I wrap only the hood or the roof of a Victor?

Yes, you can wrap only the hood or the roof of a Victor. A partial wrap covers the roof, hood, or mirror caps without changing the whole car. This is a smaller job than a full wrap and uses less film. A chrome delete of the window trim and badges is also possible.

Is a Victor hard to wrap?

A Victor is not especially hard to wrap, but the tailgate adds work because the rear glass is in the panel and the film ends at the edge of the glass. The car is mid-size, so a full wrap uses a standard amount of 60-inch (1.52 m) film. The door handles and mirrors need cut-outs or removal. A good panel plan makes the job straightforward.