Wraps by car

Vauxhall Vectra wrap

This page covers the Vauxhall Vectra wrap for two generations of the mid-size car, the third from 2003 to 2008 and the second from 1995 to 2001. A full vinyl wrap of the newest body takes about 52 ft (16 m) for the hatchback and up to 66 ft (20 m) for the wagon with 60-inch (1.52 m) cast film. Chrome or patterned film can add up to about 74 ft (22.5 m).

2generations17 mof film for a full wrap

Vauxhall Vectra, third generation, factory photo
Vauxhall Vectra, third generation. Factory color shown.

Vauxhall Vectra wrap colors and ideas

  • Vectra black wrap
  • Vectra white wrap
  • Vectra gray wrap
  • Vectra silver wrap
  • Vectra red wrap
  • Vectra blue wrap
  • Vectra green wrap
  • Vectra yellow wrap
  • Vectra orange wrap
  • Vectra purple wrap
  • Vectra pink wrap
  • Vectra teal wrap
  • Vectra brown wrap
  • Vectra gold wrap
  • Vectra chrome wrap
  • Vectra color shift wrap
  • Vectra carbon fiber wrap
  • Vectra camo and patterned wrap

How much vinyl to wrap a Vauxhall Vectra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2008hatchback, sedan, wagon (4 or 5 doors)180.9 in (4,596 mm) to 190.5 in (4,839 mm)about 52 ft (16 m) for the hatchback to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)
1995–2001hatchback, sedan, wagon (4 or 5 doors)176.8 in (4,490 mm) to 188.1 in (4,777 mm)about 51 ft (15.5 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

Vectra wrap cost factors

Vectra wrap cost depends on the film amount, the body style, and the age of the paint. The wagon needs more film than the hatchback or sedan because of its longer roof and extra panels. Third-generation cars from 2003 to 2008 may need more prep than second-generation cars from 1995 to 2001 if the paint is weathered. A chrome or patterned film also raises the material required.

  • Film for a full wrap: about 52 ft (16 m) for the hatchback to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).
  • Body: hatchback, sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Vectra wraps by generation

Swipe sideways. Tap a card for the full description.

Vauxhall Vectra, third generation, factory photo
Factory color shown

2003–2008 Vectra hatchback, sedan, wagon (third generation)

2003–2008hatchback, sedan, wagon (4 or 5 doors)180.9 in (4,596 mm) to 190.5 in (4,839 mm)

The third-generation Vauxhall Vectra, from 2003 to 2008, comes as a hatchback, sedan, or wagon. The body style decides the panel plan and the film amount, with the wagon taking about 66 ft (20 m) of 60-inch (1.52 m) cast film. The hatchback needs about 52 ft (16 m), and the sedan sits between them. All styles have a tailgate with rear glass, so the film ends at the glass edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the hatchback to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Vauxhall Vectra, second generation, factory photo
Factory color shown

1995–2001 Vectra hatchback, sedan, wagon (second generation)

1995–2001hatchback, sedan, wagon (4 or 5 doors)176.8 in (4,490 mm) to 188.1 in (4,777 mm)

The second-generation Vauxhall Vectra, from 1995 to 2001, often has original or repainted panels at this age. A test spot on the paint comes before a full wrap to check how the vinyl adheres. You may need to correct chips or fading before wrapping. The sedan needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, and the wagon about 59 ft (18 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Vectra

On a Vauxhall Vectra you can wrap only the roof, hood, or mirror caps as a partial job. A Vectra chrome delete covers the window trim and badges with black film. PPF on the front end is another smaller job that uses clear film. These partials use less film than a full wrap and are a way to change one area at a time.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Vauxhall Vectra: body, cut-outs and film

A Vauxhall Vectra vinyl wrap spans 180.9 in (4,596 mm) to 190.5 in (4,839 mm) on the third generation, and 176.8 in (4,490 mm) to 188.1 in (4,777 mm) on the second. Each generation offers hatchback, sedan, and wagon styles with 4 or 5 doors. The wagon has the longest roof and most film, while the hatchback and sedan are closer in size. You plan panel by panel because the tailgate includes the rear glass.

Vectra wrap ideas often start with the tailgate, where the film ends at the edge of the rear glass on every body. You may also cover the roof and hood, or do a chrome delete on window trim and badges with black film. Paint protection film (PPF) on the front end is another option. Mirror caps and other small panels are straightforward add-ons.

To know how much vinyl to wrap a Vectra, compare the two generations. The third generation needs about 52 ft (16 m) for the hatchback to 66 ft (20 m) for the wagon with 60-inch (1.52 m) cast film. The second generation takes about 51 ft (15.5 m) for the sedan to 59 ft (18 m) for the wagon. Chrome or patterned film adds up to about 74 ft (22.5 m) on the third and 69 ft (21 m) on the second.

Questions about wrapping a Vauxhall Vectra

How much vinyl does it take to wrap a Vauxhall Vectra?

It takes about 52 ft (16 m) for the hatchback to 66 ft (20 m) for the wagon of the newest Vectra body, with 60-inch (1.52 m) cast film. The exact amount depends on the body style and whether you use chrome or patterned film, which can push the total to about 74 ft (22.5 m).

Which Vectra body takes more film?

The wagon takes more film than the hatchback or sedan on any Vectra. On the third generation the wagon needs about 66 ft (20 m), while the hatchback needs about 52 ft (16 m) of 60-inch (1.52 m) film. Its longer roof and larger tailgate add surface area.

Can I wrap only the hood or the roof of a Vectra?

Yes, you can wrap only the hood or the roof of a Vectra. Partial jobs include the roof, hood, and mirror caps, along with chrome delete on window trim and badges. A front-end paint protection film is another option with clear film.

Is a Vectra hard to wrap?

A Vectra is not the hardest car to wrap, but the large tailgate and rear glass add work on every body. The mid-size panels are manageable, yet the wagon's extra length means more film to align. On older second-generation cars, you may need extra prep if the paint is original or repainted.